New products
Trend Trend 50/05 x 8mm HSSE Helical Plunge Bit 5mm
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE.One Flute helical Plunge-slotting bit.8 mm Shank.D = 5 mmC = 12 mmOL = 60 mm
£24.49
-
Trend Trend 4/29 x 1/2 TCT Two Flute Cutter 18.0 x 25mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 4/29 x 1/2 TCT Two Flute Cutter has the following specification: D: 18mm (45/64in)C: 25mmOL: 67mmShank Diameter: 1/2in
£52.49
-
Trend Trend 3/73 x 1/2 TCT Two Flute Workshop Cutter 12.0 x 50mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/73 x 1/2 TCT Two Flute Workshop Cutter has the following specification: D: 12mm (15/32in)C: 50mmOL: 109mmShank Diameter: 1/2in
£49.99
-
Trend Trend 3/6 x 1/4 TCT Two Flute Cutter 10.0 x 19mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/6 x 1/4 TCT Two Flute Cutter has the following specification: D: 10mm (25/64in)C: 19mmOL: 51mmShank Diameter: 1/4in
£34.99
-
Trend Trend 3/6 x 1/2 TCT Two Flute Cutter 10.0 x 19mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/6 x 1/2 TCT Two Flute Cutter has the following specification: D: 10mm (25/64in)C: 19mmOL: 63mmShank Diameter: 1/2in
£34.99
-
Trend Trend 3/80 x 1/4 TCT Two Flute Cutter 12.7 x 19mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/80 x 1/4 TCT Two Flute Cutter has the following specification: D: 12.7mm (1/2in)C: 19mmOL: 64mmShank Diameter: 1/4in
£34.49
-
Trend Trend 3/5 x 1/4 TCT Two Flute Cutter 9.0 x 19mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/5 x 1/4 TCT Two Flute Cutter has the following specification: D: 9mm (23/64in)C: 19mmOL: 51mmShank Diameter: 1/4in
£34.49
-
Trend Trend 3/50 x 1/4 TCT Two Flute Cutter 9.5 x 25mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/50 x 1/4 TCT Two Flute Cutter has the following specification: D: 9.5mm (3/8in)C: 25mmOL: 58mmShank Diameter: 1/4in
£36.99
-
Trend Trend 4/1 x 1/4 TCT Two Flute Cutter 15.0 x 25mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 4/1 x 1/4 TCT Two Flute Cutter has the following specification: D: 15mm (19/32in)C: 25mmOL: 51mmShank Diameter: 1/4in
£59.99
-
Trend Trend 3/75 x 1/2 TCT Two Flute Lockjig Cutter 12.0 x 63mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/75 x 1/2 TCT Two Flute Lockjig Cutter has the following specification: D: 12mm (15/32in)C: 63mmOL: 114mmShank Diameter: 1/2in
£56.99
-
Trend Trend 4/1 x 1/2 TCT Two Flute Cutter 15.0 x 25mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 4/1 x 1/2 TCT Two Flute Cutter has the following specification: D: 15mm (19/32in)C: 25mmOL: 67mmShank Diameter: 1/2in
£59.99
-
Trend Trend 3/81 x 1/2 TCT Two Flute Cutter 12.7 x 32mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/81 x 1/2 TCT Two Flute Cutter has the following specification: D: 12.7mm (1/2in)C: 32mmOL: 74mmShank Diameter: 1/2in
£34.99
