New products
Trend Trend 4/6 x 1/2 TCT Two Flute Cutter 20.0 x 25mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 4/6 x 1/2 TCT Two Flute Cutter has the following specification: D: 20mm (25/32in)C: 25mmOL: 66mmShank Diameter: 1/2in
£56.99
-
Trend Trend 46/07 x 1/4 TCT 90° Template Profiler 6.3 x 25.4mm
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 6.3 mmC = 25.4 mm
£32.99
-
Trend Trend 50/08 x 8mm HSSE Helical Plunge Bit 8mm
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE.One Flute helical Plunge-slotting bit.8 mm Shank.D = 8 mmC = 14 mmOL = 80 mm
£24.49
-
Trend Trend 4/50 x 1/2 TCT Two Flute Cutter 19.1 x 37mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 4/50 x 1/2 TCT Two Flute Cutter has the following specification: D: 19mm (3/4in)C: 37mmOL: 79mmShank Diameter: 1/2in
£61.49
-
Trend Trend 46/140 x 1/2 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius
Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile.This Trend TCT Bearing Guided Ovolo & Round Over has the following specification: Radius: 9.5mmDiameter: 32mmCutter Height: 16mmShank: 1/2inBearings: 9.5, 12.7mm
£69.99
-
Trend Trend 46/390 x 1/2 TCT Bearing Guided Rebater 22.5mm x 50.8mm
This Trend 46/390x1/2TC Large Guided Rebater is bearing guided for straight curved work. It is for use with portable or stationary routers and is supplied as standard with ref: BR/191 fitted.There are a variety of bearing rings available to give various rebate sizes. These rings are secured between the two bearings. D: 50.8 mm.C: 22.5 mm.B: 12.7 mm.E: 19.1 mm.E: 15.9 mm.OL: 78 mm. Specifications: Shank Diameter: 1/2 inch.Shank length: 35 mm.
£112.49
-
Trend Trend 46/130 x 1/4 TCT Bearing Guided Ovolo & Round Over 6.3mm Radius
Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile.This Trend TCT Bearing Guided Ovolo & Round Over has the following specification: Radius: 6.3mmDiameter: 25.4mmCutter Height: 13mmShank: 1/4inBearings: 9.5, 12.7mm
£67.49
-
Trend Trend 4/5 x 1/2 TCT Two Flute Cutter 19.1 x 25mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 4/5 x 1/2 TCT Two Flute Cutter has the following specification: D: 19.1mm (3/4in)C: 25mmOL: 67mmShank Diameter: 1/2in
£50.99
-
Trend Trend 4/2 x 1/4 TCT Two Flute Cutter 16.0 x 19mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 4/2 x 1/4 TCT Two Flute Cutter has the following specification: D: 16mm (5/8in)C: 19mmOL: 52mmShank Diameter: 1/4in
£37.49
-
Trend Trend 4/70 x 1/2 TCT Two Flute Cutter 25.0 x 25mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 4/70 x 1/2 TCT Two Flute Cutter has the following specification: D: 25mm (63/64in)C: 25mmOL: 65mmShank Diameter: 1/2in
£58.49
-
Trend Trend 46/23 x 1/2 TCT 90° Template Profiler 12.7 x 50mm
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Angle A = 90° D = 12.7 mmC = 50 mm
£97.49
-
Trend Trend 46/118 x 1/4 TCT Bearing Guided Ovolo & Round Over 3mm Radius
Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile.This Trend TCT Bearing Guided Ovolo & Round Over has the following specification: Radius: 3mmDiameter: 18.7mmCutter Height: 9.5mmShank: 1/4inBearings: 9.5, 12.7mm
£64.99
