Surface condition
Interior
Task
Jointing plasterboard
Filling and repairing (holes, gaps, cracks)
Application method
Manual
Time between coats
2 Hours
Surfaces
Joint Filler 1 Hour can be applied to:
Gypsum plaster, plasterboard/drywall and old painted surfaces.
There is no need to prime or seal the surface before application.
Overcoat with
Joint Filler 1 Hour can be overcoated with any type of filler, paint or wall coating.
Maximum recommended application thickness
Suitable for small filling jobs.
Ready to paint time
24 Hours
Application tools
Taping knife.
Recommended temperature and humidity for application
Do not apply at a temperature below +8°C or above +35°C nor at a relative humidity over 70%.
Adhesion
Adhesion filler/substrate (EN 16-566) : > 0,5 Mpa
Coverage g/m² (at 1mm thickness)
1100.00
IAQ (Indoor Air Quality) classification
A+
Guarantee
Product guaranteed for 12 months from purchase, in original package and stored away from humidity
