New products

Liberon Spirit Wood Dye is ideal for use on hardwood and furniture restoration, it is a traditional dye which penetrates deep into the wood. It can be mixed together to obtain intermediate shades and can be used for colouring dense hardwoods such as mahogany and oak. It is ideal for colouring previously finished woods i.e. for antique restoration. It is easy to apply, and all colours are intermixable. Coverage: Approx. 10-12m² per litre.Drying time: Minimum 6 hours.Application: Brush or clothUsage: Interior.The Liberon LIBWDSLO250 Spirit Wood Dye comes in the following:Colour: Light OakPack size: 250ml

Read more less

The Moore & Wright Firm Joint Outside Calipers are manufactured from polished tool steel and have a large headed nut and screw assembly providing a firm and rigid friction joint, with no play. The sizes listed are the effective leg length which is measured from the joint assembly. The Firm Joint Outside Calipers are manufactured to BS3123 standards. Note: Firm joint caliper capacities are generally 1/3 greater than the effective leg length.1 x Moore & Wright 33124 Firm Joint Outside Calipers 600mm (24in)

Read more less

The Liberon Teak Oil is a blend of pure tung oil and linseed oil which nourishes and enhances the natural beauty of hard/exotic woods, including teak and iroko. With added UV filters for protection against fading from sunlight Teak Oil is suitable for interior and exterior use. Achieving the traditional cabinet makers finish on hardwoods, Teak Oil produces a hard-wearing satin finish. Performance:- Blend of pure Tung Oil and linseed oil - Nourishes and enhances the natural beauty of hard exotic / oily woods - Added UV filters minimise fading from sunlight - Finishes and protects interior and exterior woodwork - Ideal for use on garden furniture - EN 71 Approved- safe for toys - Usage: Interior and exterior Specification Coverage: 10-12m² per litre.Drying Time: 24 hours.Liberon LIBTOUV500 Teak Oil With UV comes in the following: Size: 500ml.

Read more less

Moldex Bitrex Fit Testing Kit. The Approved Code of Practices supporting COSHH, CAR and CLAW stipulate that tight-fitting RPE (respiratory protective equipment) MUST be fit tested as part of the selection process. This is to ensure that the selected RPE has the potential to provide adequate protection for the wearer. There are two main reasons for doing Bitrex testing. Firstly to make sure that the respirator itself is suited for the wearer's particular face shape. Secondly to make sure that the respirator is fitted correctly to get a tight seal and ensure safety against hazards in the workplace. It is important to remember it is the suitability of the respirator that is being tested. The Moldex MOL10301 Bitrex Fit Testing Kit contains: 2 x Nebulisers.1 x Test Hood.6 x 2.5ml Ampoules Bitrex Sensitivity Solution.6 x 2.5ml Ampoules Bitrex Test Solution.2 x Spare Parts For Nebulisers.1 x Fit Test Instruction USB stick.

Read more less

Lindstrom 7890 Supreme Flat Nose Pliers are produced from high performance tool steel. These holding pliers have a screw joint that minimises friction and maximises alignment of cutting edges. The handles have a return spring and are sleeved. The smooth jaws minimise the risk of damage and scratching surfaces. Length (A): 132mm (5.2 in). Jaw length (B): 32mm (1.26 in). Head width (C): 9mm (0.35 in). Head depth (D): 6mm (0.24 in). Tip width (E): 1.2mm (0.05 in). Tip depth (F): 0.8mm (0.03 in).

Read more less

The Moldex MX-7 Helmet Mounted Earmuffs fit helmets with 30mm Euro slots. They have a flexible, lightweight design with smooth sliding size adjustment. Fitted with viscoelastic foam cushions for improved pressure distribution and increased comfort. ;The larger cup openings are designed to fit most ear sizes. Has a signal to noise ratio (SNR) of 31 dB.

Read more less

The Master Lock Lockout Gate Valve Cover has Zenex™ composite body, which withstands chemicals and extreme temperatures ranging from -57 ° C to +177 ° C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes. The Centre knockout can be removed for rising stem gate valves. Device can be locked with up to 2 padlocks. 'Danger DO NOT OPERATE' label supplied.Can lock valve sizes 25-75mm (1-3 in).

Read more less

The ITL Insulated Belling Tool designed to enable jointers to avoid damage to insulation and safely bell cable earth sheaths during live jointing. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.

Read more less

Masterlock’s range of electrical Lockout hasps are practical, flexible and hard wearing and used when multiple numbers of workers are operating in the area. They can be used in a variety of locations for a broad range of lockout tasks. This non-conductive Lockout Nylon Hasp enables lock-out by multiple workers (up to 6 padlocks) to keep the equipment inoperative while repairs or adjustments are made.The nylon body and jaw are non-conductive, and the hasp provides dielectric protection. It is non-sparking and ideal for electrical applications. Max shackle diameter: 6.35mm. Dimensions: 41mm x 174mm.

Read more less

Moldex Corded reusable Twisters® Trio Earplugs have a multi-curved stem that rotates, providing a custom fit. They have a soft, washable TPE pod, meaning that they are reusable, they can be used for several weeks before disposal. Fitted with a large handle for easy insertion and removal. They are supplied in a handy storage container to keep the plugs hygienic between use. Has a signal to noise ratio (SNR) of 33 dB.

Read more less

Liberon Palette Wood Dyes are ideal for dying / colouring all interior bare woodwork, whilst leaving the natural beauty of the grain visible. For use prior to oil, wax, varnish and French polish finishes - they are suitable for both soft and hardwoods. Quick and uniform results can be achieved on large and small surfaces such as furniture, floors, doors, cupboards, frames etc and being 'EN 71 - Part 3 approved' they are also safe for use on toys. Available in a range of wood shades, the different colours can be mixed together to create unique shades. Performance:- Water based dye for interior woodwork. - Suitable for use on floors. - Leaves the grain visible. - Suitable for use on both hard and softwoods. - EN 71 approved - safe for toys. - Endorsed by the Guild of Master Craftsmen. - Can be mixed with Liberon Natural Finish Varnishes. Usage: interiorCoverage: Approx. 2-4m² per 250ml.Application: Foam applicator or brushDrying Time: Minimum of 2 hoursTool Cleaning: WaterThe Liberon LIBWDPE250 Palette Wood Dye comes in the following finish:EbonyContainer Size: 250ml

Read more less

These Master Lock Lockout Electrical Plug Covers surround the electrical plug and prevent accidental reconnection. Rotating design enables installation in confined spaces. Zenex™ construction withstands chemicals and extreme temperatures ranging from -57°C to +177°C Complete with high-visibility safety label: DANGER - DO NOT REMOVE. Padlock is not supplied.This small Lockout Electrical Plug Cover is suitable for 120 to 240 volt electrical plugs.

Read more less