New products

Metric 333mm lengths of high carbon bright steel, precision ground to very close tolerances; Above 25mm ± 0.025mm.Below 25mm ± 0.0127mm. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 12mm

Read more less

Imperial 13in lengths of high carbon bright steel, precision ground to very close tolerances: Above 1in ± 0.0005in.Below 1in ± 0.00025in. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 1/2 in

Read more less

Metric 333mm lengths of high carbon bright steel, precision ground to very close tolerances; Above 25mm ± 0.025mm.Below 25mm ± 0.0127mm. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 10mm

Read more less

Metric 333mm lengths of high carbon bright steel, precision ground to very close tolerances; Above 25mm ± 0.025mm.Below 25mm ± 0.0127mm. Closely controlled analysis for uniform machining properties and consistent response to heat treatment. Chamfered, deburred ends for safety.Size 13mm

Read more less

The Panasonic EYC242LJ2G31 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18.Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm. 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder: 1/2in Square Drive with Ball Detent.No Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpm.Max. Torque: 280Nm.Tensile Bolt Capacity: Standard M6-M16, High M6-M12. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.

Read more less

The Panasonic EYC242 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18.Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm. 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder: 1/2in Square Drive with Ball Detent.No Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpm.Max. Torque: 280Nm.Tensile Bolt Capacity: Standard M6-M16, High M6-M12. Also supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.

Read more less

The Panasonic EYC241LJ2G31 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill Driver. Automatically adjusts the speed of the drill to the torque being exerted, for optimum efficiency. Tough-Tool IP rated against dirt and dust ingress encountered on site. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18.Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm. 1 x 18V EY76A1 Smart Brushless Impact Driver with DASH mode, this allows the unit to instantly reach full speed. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one-touch bit holder with a tapering collar design makes accessory changing quick and simple. Chuck: 6.35mm (1/4in).No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/min.Torque: 26/150/170Nm.Capacity: Tensile Bolt: Standard M6-M16, High M6-M12. Also supplied with: 2 x 18V Li-ion Batteries, 1 x Charger and 1 x Systainer Case.

Read more less

The Panasonic EYC232LJ Twin Pack contains the following: 1 x 18V EY74A3 Smart Brushless Drill Driver automatically adjusts between a fast rotation speed for lighter work and higher torque whenever the load increases. This enables appropriate torque and rotation for any task. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. Chuck: 13mm Keyless.No Load Speed: 20-530/70-1,800/min.Max. Torque: 50Nm, 18 Settings. 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x Charger and 1 x Systainer Case.

Read more less

The Panasonic EYC232LJ Twin Pack contains the following: 1 x 18V EY74A3 Smart Brushless Drill Driver automatically adjusts between a fast rotation speed for lighter work and higher torque whenever the load increases. This enables appropriate torque and rotation for any task. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. Chuck: 13mm Keyless.No Load Speed: 20-530/70-1,800/min.Max. Torque: 50Nm, 18 Settings. 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Also supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x Charger and 1 x Systainer Case.

Read more less

The Panasonic EYC241PN2G3 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill Driver. Automatically adjusts the speed of the drill to the torque being exerted, for optimum efficiency. Tough-Tool IP rated against dirt and dust ingress encountered on site. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18.Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm. 1 x 18V EY76A1 Smart Brushless Impact Driver with DASH mode, this allows the unit to instantly reach full speed. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one-touch bit holder with a tapering collar design makes accessory changing quick and simple. Chuck: 6.35mm (1/4in).No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/min.Torque: 26/150/170Nm.Capacity: Tensile Bolt: Standard M6-M16, High M6-M12. Also supplied with: 2 x 18V 3.0Ah Li-ion Batteries, 1 x Charger and 1 x Systainer Case.

Read more less

The Panasonic EYC231PN Twin Pack contains the following: 1 x 18V EY74A3 Smart Brushless Drill Driver automatically adjusts between a fast rotation speed for lighter work and higher torque whenever the load increases. This enables appropriate torque and rotation for any task. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. Chuck: 13mm Keyless.No Load Speed: 20-530/70-1,800/min.Max. Torque: 50Nm, 18 Settings. 1 x 18V EY76A1 Smart Brushless Impact Driver with DASH mode, this allows the unit to instantly reach full speed. It has an ultra-compact body design with increased impact protection as well as an ergonomic soft grip for user comfort. Fitted with a one touch bit holder with a tapering collar design makes accessory changing quick and simple. Chuck: 6.35mm (1/4in).No Load Speed: 0-950/0-1,450/0-2,800/min.Impact Rate: 0-1,800/0-2,500/0-3,100/min.Torque: 26/150/170Nm.Capacity: Tensile Bolt: Standard M6-M16, High M6-M12. Also supplied with: 2 x 18V Li-ion Batteries, 1 x Charger and 1 x Systainer Case.

Read more less

This hatchet has a fully hardened and tempered carbon steel head. The heat-treated, seamless tubular shaft is fitted with a non-slip, solvent resistant grip. Supplied with a protective head cover with a belt clip.

Read more less