New products

The DEWALT DCG418 XR FlexVolt Grinder has a high power density motor with more copper and higher grade magnets for increased power, as well as an upgraded electronic module programme and components. A mesh guard improves durability and reduces motor dust ingress/contamination. When powered by a FlexVolt DCB546 or DCB547 battery, it provides up to 30% more power than the DCG414. Its compact gear case allows ease of use and access into tight spaces. Fitted with a rubber overmould that provides enhanced grip and comfort. An E-brake and E-clutch increase user safety, helping to protect the user in the event of disc bind up. There is also a one-touch guard system for easy keyless guard adjustments. Comes with a two-position side handle that offers greater comfort and control. Specifications: No Load Speed: 9,000/min.Max. Disc Diameter: 125mm.Weight: 2.2kg.The DEWALT DCG418X2 XR FlexVolt Grinder is supplied with: 2 x 18/54V 9.0/3.0Ah FlexVolt Li-ion Batteries.1 x Side Handle.1 x Keyless Guard.1 x Blade Wrench.1 x DCB116 Charger.1 x TSTAK™ II Carry Case.

Read more less

The DEWALT DCH333 XR FlexVolt Brushless SDS Plus Hammer has a brushless motor for extreme run time and reduced maintenance. Compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. With rotation stop mode for light chiselling in plaster, tiles and render and impact stop mode for rotary only drilling in wood and metal. Ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 30mm. Also fitted with a bright white LED with delay feature that improves visibility. Specifications: Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,000/min.Impact Rate: 0-4,480/min with 3.5 joules.Capacity: Concrete 30mm, Steel 13mm, Wood 26mm.Weight 3.7kg.The DEWALT DCH333NT XR FlexVolt SDS Plus Hammer comes as a Bare Unit, NO battery or charger supplied.

Read more less

The DEWALT DCG440N XR FlexVolt Angle Grinder has a high-power brushless motor for extended durability, efficiency and power. An advanced electronic control module enables soft start and effective braking. The handle incorporates overmoulded grips and a side handle for ultimate usability and comfort. An E-Clutch and Kickback-Brake ensure maximum user protection. Fitted with a keyless guard allows for quick and easy guard adjustments, without tools. Dust guards and power off electronic overload protection, guard against harsh working conditions. Supplied as a Bare Unit - No Battery or Charger. Specifications: No Load Speed: 6,500/min.Disc Diameter: 180mm.Max. Depth of Cut: 55mm.Spindle: M14/22.23mm.Weight: 2.2kg.

Read more less

The DEWALT DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. Specifications: No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 1.75kg.The DEWALT DCG405N XR Brushless Grinder is supplied as a bare unit, no battery or charger supplied.

Read more less

The DEWALT DCG405FN XR Brushless Grinder has a flat head design for access to acute angles with a compact gear case for increased access to tight spaces. The powerful fan cooled motor is fitted with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kickback reaction in the event of a pinch or stall. The 2 position side handle provides greater comfort and control whilst the rubber overmould provides enhanced grip and comfort. For added safety the electronic brake stops the wheel quickly when the trigger is released. Bare Unit, No Battery or Charger. Specifications: No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 1.8kg.

Read more less

The DEWALT DCG460 XR FlexVolt Angle Grinder has a brushless motor for improved performance, even in demanding applications. Its soft start feature helps to prevent the tool from jolting upon start up. Whilst the electronic Clutch (E-Clutch) eliminates kick back and protects both user and tool from high-load situations. Its compact gear casing allows better access in to limited spaces. The handle incorporates overmoulded grips and a side handle for ultimate usability and comfort. For the long-life of the grinder, a mesh guard reduces dust intake to the motor. Specifications: No Load Speed: 6,000/min.Blade Diameter: 230mm.Bore: M14.Weight: 5.94kg.The DEWALT DCG460NK XR FlexVolt Angle Grinder comes with: 1 x Grinding Guard.1 x Cutting Guard.1 x Hex Wrench.1 x Side Handle.1 x Kit Box. NO battery or charger supplied.

Read more less

The DEWALT DCK2046P2 Twin Nailer Kit contains the following: 1 x 18V DCN692 Cordless XR First Fix Nailer with two speeds to optimise the nailer for firing all lengths of nails. With brushless motor technology for excellent power and tool-free jam clearance to minimise down time. Suitable for many applications, including stud wall insulation, roofing, floor board and cladding installation etc. Max. Magazine Capacity: 55.Nail Length: 50-90mm.Nail Diameter: 2.8-3.3mm.Firing Mode: Bump and Sequential.Weight: 4.1kg. 1 x 18V DCN660 Cordless XR Brushless Second Fix Nailer has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. Max. Magazine Capacity: 110.Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mm.Magazine Angle: 20°.Weight: 2.7kg. Supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x Multi-Voltage Charger and 1 x Tool Bag.

Read more less

The DEWALT DCG418 XR FlexVolt Grinder has a high power density motor with more copper and higher grade magnets for increased power, as well as an upgraded electronic module programme and components. A mesh guard improves durability and reduces motor dust ingress/contamination. When powered by a FlexVolt DCB546 or DCB547 battery, it provides up to 30% more power than the DCG414. Its compact gear case allows ease of use and access into tight spaces. Fitted with a rubber overmould that provides enhanced grip and comfort. An E-brake and E-clutch increase user safety, helping to protect the user in the event of disc bind up. There is also a one-touch guard system for easy keyless guard adjustments. Comes with a two-position side handle that offers greater comfort and control. Specifications: No Load Speed: 9,000/min.Max. Disc Diameter: 125mm.Weight: 2.2kg.The DEWALT DCG418T2 XR FlexVolt Grinder is supplied with: 2 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries.1 x Side Handle.1 x Keyless Guard.1 x Blade Wrench.1 x DCB116 Charger.1 x TSTAK™ II Carry Case.

Read more less

The DEWALT DCG418 XR FlexVolt Grinder has a high power density motor with more copper and higher grade magnets for increased power, as well as an upgraded electronic module programme and components. A mesh guard improves durability and reduces motor dust ingress/contamination. When powered by a FlexVolt DCB546 or DCB547 battery, it provides up to 30% more power than the DCG414. Its compact gear case allows ease of use and access into tight spaces. Fitted with a rubber overmould that provides enhanced grip and comfort. An E-brake and E-clutch increase user safety, helping to protect the user in the event of disc bind up. There is also a one-touch guard system for easy keyless guard adjustments. Comes with a two-position side handle that offers greater comfort and control. Specifications: No Load Speed: 9,000/min.Max. Disc Diameter: 125mm.Weight: 2.2kg.The DEWALT DCG418N XR FlexVolt Grinder is supplied as a Bare Unit - No Battery or Charger supplied.

Read more less

The DEWALT DCF922 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with detent pin for quick socket changes. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Specifications: Bit Holder: 1/2in Detent Pin.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).The DEWALT DCF922N XR Brushless 1/2in Impact Wrench is supplied as a Bare Unit - No Battery or Charger.

Read more less

The DEWALT DCF921 XR Impact Wrench has an efficient brushless motor and 1/2in square drive with hog ring for quick socket changes. A hole in the anvil enables the securing of sockets with a retaining pin/rubber O-ring, making it the ideal impact wrench for scaffolders. Its variable speed trigger provides complete control over all applications and tactile 4-mode select feature, a selection of different modes and speed settings for ultimate performance. * Mode 1 Low Speed: tool operates at a reduced speed and outputs approximately 160Nm, reverse tool operates at normal speed.* Mode 2 Mid Speed: tool operates at a reduced speed and outputs approximately 400Nm, reverse tool operates at normal speed.* Mode 3 High Speed: tool operates at normal speed, reverse tool operates at normal speed.* Mode 4 Precision Wrench: tool pauses before impacting to help prevent over-tightening, reverse tool lowers speed when fastening is loose to help prevent run-off. Its ultra-compact design enables easy access in confined areas. Fitted with a comfortable rubber XR grip and switch for greater application comfort and maximum control. An ultra-bright white LED work light with a delay feature improves visibility. Brightness control allows dimming or turn off to suit the working conditions. Comes with a 1 Year Warranty. Specifications: Bit Holder: 1/2in Hog Ring.No Load Speed: 2,500/min.Impact Rate: 3,600/bpm.Max. Fastening Torque: 406Nm.Nut Busting Torque: 610Nm.Weight: 1.1kg (without battery).The DEWALT DCF921P2T XR Brushless 1/2in Impact Wrench is supplied with: 2 x 18V 5.0Ah Li-ion Batteries.1 x Charger.1 x TSTAK™ Kitbox.

Read more less

The DEWALT DCF891 XR 1/2in Hog Ring Anvil Impact Wrench was designed to comfortably handle various fastening projects. Choose between 4 modes to allow for reliable high-level performance, operability, and versatility. The compact ergonomic design offers easy maneuverability without sacrificing power. Fitted with an LED work light for visibility in dimly lit spaces. Specifications: Bit Holder: 1/2in Hog Ring Anvil.No Load Speed: 0-2,000/min.Impact Rate: 0-3,250/bpm.Max. Torque: 812Nm.Max. Bolt Diameter: M4.The DEWALT DCF891P2T XR Brushless Impact Wrench is supplied with the following: 2 x 18V 5.0Ah Li-ion Batteries.1 x Charger.1 x TSTAK™ Kitbox.

Read more less