New products
Draper Draper Torpedo Level with Magnetic Base, 230mm 79579
ABS plastic with a V - groove magnetic strip in the base. Three vials, one horizontal, vertical and 45° vials. Incorporates a V groove in the top, rubber end caps and a hang hole. Vial sensitivity 0.1° with a level accuracy of 1.75mm/M = 0.57° in standard position. Display packed.
£5.99
-
Draper Draper XP20 20V Brushless Impact Wrench, 3/4" Sq. Dr., 1060Nm (Sold Bare) 79367
Features: Expert Quality, XP20 multi - tool battery system, brushless technology, intelligent electronics, 4 electronic torque settings, Electronic smart reverse mode, FG reinforced housing, compact 225mm length, smart reverse (stops impact and slows rotation when bolt/nut is loosened), super bright LED worklight, Variable speed control with electronic brake. Supplied with tough carry case fitted with metal clasps, Batteries and chargers are available separately. XP20 interchangeable battery system allows you to combine one battery with any of the tools within the XP20 series.SpecificationsBattery: XP20 20V Li-ionImpact Rate: 0-2400bpmNo load speed: 0-1800rpmMax Torque: 1060NmVariable speed: YesSquare Drive: 3/4"Batteries Per Item: N/ACharger Type: N/ASupplied in Case: YesWeight (bare tool): 3.3kg
£283.49
-
Draper Draper Portable Dust/Chip Extractor, 55L, 750W 79359
For collection of wood chips and shavings in a workshop/DIY environment. Can be connected to various woodworking machines by use of the flexible hose. Floor suction facility included. Four castors on base. 5 micron filter bag. Supplied with hose and collection bag, cable and approved plug. Display carton.SpecificationsMotor 750WInput amperage 13AAir flow 14.15m[#Sup3]/minFiltration 5 micronOutlet 100mmBag size 370mm dia. x 640mmCapacity 55LWeight 27kg
£343.99
-
Draper Draper Latex Gloves, Size Large, White (Box of 100) 79298
Soft white latex gloves supplied as a box of 100. Suitable for single use. Made from 100% natural rubber latex. Provide dexterity, comfort and grip. Resistant to tears and abrasions.StandardsManufactured to EN455-1, EN455-2 and EN455-4 Specifications and Tested in accordance with EN1186.
£14.99
-
Draper Draper Combination Tap and Die Set Metric and BSP (76 Piece) 79205
Manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Supplied with the correct drill bits for tapping. Contents held in plastic insert within steel storage case. Carton packed.Contents9 x Metric coarse dies: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5 x 0.75, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1" O/D8 x Metric fine dies: 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x 0.75, 8 x 1.0, 10 x 1.25, 12 x 1.25 - 1" O/D1 x BSP die 1/8" BSP17 x Metric taper taps: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5 x 0.75, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1" O/D, 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x 0.75, 8 x 1.0, 10 x 1.25, 12 x 1.25 - 1" O/D17 x Metric plug taps (bottoming): 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 4.5 x 0.75, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1" O/D, 2 x 0.25, 3 x 0.35, 4 x 0.5, 5 x 0.5, 6 x 0.75, 8 x 1.0, 10 x 1.25, 12 x 1.25 - 1" O/D1 x Taper tap 1/8" BSP1 x Tap wrench - American pattern 1/2" capacity1 x 'T' type tap wrench 1/4" capacity1 x Die holder 1" O/D with guide17 x HSS twist drills: 1.7, 2.5, 2.6, 2.9, 3.3, 3.5, 4.2, 4.5, 5.0, 5.3, 6.8, 7.0, 8.5, 8.8, 10.3, and 10.7mm1 x Screw-pitch gauge1 x Screwdriver1 x 1/8" BSP tap (bottoming)
£129.99
-
Draper Draper Tap and Die Set (52 Piece) 79204
Manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Supplied with the correct drill bits for tapping. Contents held in plastic insert within steel storage case. Carton packed.Contents7 x Metric dies: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1" O/D5 x UNF dies: 1/4, 5/16, 3/8, 7/16, 1/2 - 1" O/D2 x BSP dies: 1/8", 1/4" - 1" O/D14 x Taper taps: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.5, 12 x 1.75 - 1" O/D, 1/4, 5/16, 3/8, 7/16, 1/2 - 1" O/D, 1/8", 1/4" - 1" O/D1 xTap wrench - American pattern 1/2" capacity1 x 'T' type tap wrench 1/4" capacity1 x Die holder 1" O/D with guide13 x HSS twist drills: 2.5, 3.3, 4.2, 5.0, 5.5, 6.8, 6.9, 8.5, 8.8, 9.9, 10.3, 11.4, 11.8mm1 x Screw pitch gauge1 x Screwdriver1 x Centre punch5 x Screw extractors No.1, No.2, No.3, No.4, No.5
£111.49
-
Draper Draper Tap and Die Set (37 Piece) 79203
Manufactured from carbon steel. Taps and dies suitable for cleaning and cutting threads on mild steel and aluminium. Supplied with the correct drill bits for tapping. Contents held in plastic insert within a steel storage case. Carton packed.Contents8 x Metric dies: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.50 and 12 x 1.75 - 1" O/D8 x Metric taper taps: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.50 and 12 x 1.75 - 1" O/D8 x Metric plug taps: 3 x 0.5, 3.5 x 0.6, 4 x 0.7, 5 x 0.8, 6 x 1.0, 8 x 1.25, 10 x 1.50 and 12 x 1.75 - 1" O/D1 x Tap wrench - American pattern 1/2" capacity1 x 'T' type tap wrench 1/4" capacity1 x Die holder 1" O/D8 x HSS twist drills size: 2.5, 2.9, 3.3, 4.2, 5.0, 6.8, 8.5 and 10.3mm1 x Screw pitch gauge
£79.99
-
Draper Draper Metric Tap and Holder Set (6 Piece) 79202
Popular sizes of carbon steel cut thread taps and 'T' type holder. Display packed.Contents5 x taps: 3.5 x 0.60, 4 x 0.70, 6 x 1.00, 8 x 1.25, 10 x 1.501 x 'T' type tap holder
£22.49
-
Draper Draper Metric Tap and Die Set (10 Piece) 79201
Ideal kit for re-threading. Suitable for cutting threads on mild steel and aluminium. Manufactured from high carbon steel.Contents4 x Metric coarse dies: 4, 5, 6, 8mm - 1" O/D4 x Metric taper taps size: 4, 5, 6 and 8mm - 1" O/D, die holder 1" O/D, 'T' type tap wrench capacity M4 - M8
£16.99
-
Draper Draper Metric Hand Tap Set (10 Piece) 79200
Second taper taps manufactured from special high carbon steel with accurately cut threads. Display packed.Contents10 x Taps: 3 x 0.5, 4 x 0.7, 5 x 0.8, 6 x 1.0, 7 x 1.0, 8 x 1.25, 9 x 1.25, 10 x 1.5, 11 x 1.5 and 12 x 1.75
£18.49
-
Draper Draper UNF Hand Tap Set (10 Piece) 79199
Second taper taps manufactured from special high carbon steel with accurately cut threads. Display packed.Contents1 x Tap size: 5 x 44 (tpi)1 x Tap size: 6 x 40 (tpi)1 x Tap size: 8 x 36 (tpi)1 x Tap size: 10 x 32 (tpi)1 x Tap size: 12 x 28 (tpi)1 x Tap size: 1/4" x 28 (tpi)1 x Tap size: 5/16" x 24 (tpi)1 x Tap size: 3/8" x 24 (tpi)1 x Tap size: 7/16" x 20 (tpi)1 x Tap size: 1/2" x 20 (tpi)
£18.49
-
Draper Draper Metric Hexagon Die Nut Set (5 Piece) 79198
Manufactured from carbon steel. Display packed.Contents5 x Dies: 6 x 1.00, 8 x 1.25, 10 x 1.50, 11 x 1.50, 12 x 1.75mm
£15.99
