New products
Faithfull Faithfull FSC Hickory Sledge Hammer Handle 915mm (36in)
Faithfull replacement sledge hammer handle in straight grained hickory with a waxed finish. Made with FSC® 100% Certified Wood from well-managed forests.SAFETY TIPReplacing a damaged or broken handle on a striking tool should be done with great care. Handles must always be fitted with the correct size wooden and steel wedges.1 x Faithfull FSC Hickory Sledge Hammer Handle 915mm (36in).
£14.49
-
Faithfull Faithfull Hoseclip Display C/W Stock 100Pc
The Faithfull Hoseclip Display is a colourful wire framed dispenser with a backing board carrying size information on the clip selection available.Supplied complete with ten of each of the following popular size of hose clips. FAIHCOOOB 000 MSZP Hose Clip 9.5 - 12mm.FAIHCMOOB M00 MSZP Hose Clip 11 - 16mm.FAIHCOOB 00 MSZP Hose Clip 13 - 20mm.FAIHCOB 0 MSZP Hose Clip 16 - 22mm.FAIHCOXB 0X MSZP Hose Clip 18 - 25mm.FAIHC1AB 1A MSZP Hose Clip 22 - 30mm.FAIHC1B 1 MSZP Hose Clip 25 - 35mm.FAIHC1XB 1X MSZP Hose Clip 30 - 40mm.FAIHC1MB 1M MSZP Hose Clip 32 - 45mm.FAIHC2AB 2A MSZP Hose Clip 35 - 50mm.Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses, flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required.The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver when tightening or loosening the clips.Standard range hose clips are manufactured from mild steel, are zinc plated to aid corrosion resistance, and are available in a wide variety of sizes
£58.49
-
Faithfull Faithfull FSC Hickory Sledge Hammer Handle 765mm (30in)
Faithfull replacement sledge hammer handle in straight grained hickory with a waxed finish. Made with FSC® 100% Certified Wood from well-managed forests.SAFETY TIPReplacing a damaged or broken handle on a striking tool should be done with great care. Handles must always be fitted with the correct size wooden and steel wedges.1 x Faithfull FSC Hickory Sledge Hammer Handle 765mm (30in).
£11.49
-
Faithfull Faithfull Knife & Hammer Holder 2100D Nylon
The Faithfull Knife & Hammer Holder is made from durable 2100 denier nylon. Riveted at stress points to increase strength. The belt loop is compatible with all Faithfull belts.
£7.99
-
Faithfull Faithfull Forstner Bit 20mm
Faithfull Forstner Bits are designed with durability, accuracy, and ease of use in mind. Manufactured from forged, hardened steel for increased longevity, they feature an ultra-sharp spur to provide accurate hole drilling without walking on the material. The steep, angled cutting edges produce smooth, flat holes and create chisel-like curls for fast, clean chip removal. The centre point aids in drilling straight, angled, and overlapping holes in softwood and hardwoods, veneered wood, and non-laminated chipboard.nCompatible with all drill drivers and bench drills with a standard 8mm chuck.1 x Faithfull Forstner Bit 20mm.
£5.99
-
Faithfull Faithfull Feather Edge with Scale 2m x 93mm x 25mm
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5mm intervals and numbered every 50mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.This models features a metric scale along the length graduated at 5mm intervals and numbered every 50 mm.Length: 2000mm (6 ft 6 in)Section: 93 x 25mm (3 5/8 x 1 in)
£39.49
-
Faithfull Faithfull Feather Edge 2.4m x 93mm x 25mm
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5mm intervals and numbered every 50mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.Size 2400mm (8 ft)Section: 93 x 25mm (3 5/8 x 1 in)
£49.49
-
Faithfull Faithfull Black Steel Roofing Square 400 x 600mm (16 x 24in)
The Faithfull Roofing Square, also known as a Rafter or Framing Square, is a common favourite for carpenters the world over. It is suitable for many roofing and general woodworking projects. Made from heavy-duty steel with a powder-coated black finish for corrosion protection. Clearly graduated in metric and imperial with conversion charts printed on the reverse. Ideal when hand cutting a roof. Hips, valleys, bird beaks, plumb cuts and overhang cuts can all be determined using this square. Rises and pitches can also be calculated using the unique conversion chart on the square itself.1 x Faithfull Black Steel Roofing Square 400 x 600mm (16 x 24in)
£9.49
-
Faithfull Faithfull Black Japanned Chain 5.0mm x 2.5m - Max. Load 160kg
These Faithfull Welded Chains are manufactured from a mild steel with a Black Japanned finish. These chains are load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications. Maximum load figures quoted are for guidance ONLY.The Faithfull FAICHCUT50B Black Japanned chain has the following specifications:Size: 5.0mm x 2.5mFinish: Black Japanned
£6.49
-
Faithfull Faithfull Zinc Plated Chain 6mm x 2.5m - Max. Load 250kg
These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.The Faithfull FAICHCUT60Z Zinc Plated Chain has the following specifications:Size: 6.0mm x 2.5mFinish: Zinc
£7.99
-
Faithfull Faithfull Oval Chain 1.8mm x 10m Polished Brass
The Faithfull lightweight oval chains are suitable for a variety of domestic household applications. Available in either a polished brass or chrome plated finish. Supplied in 10m reels.The Faithfull FAICHOP18 Oval chain is made from brass with a polished finish, with the following specifications: Link Diameter: 1.8mm.Link Length: 13mm.Length: 10m.
£45.49
-
Faithfull Faithfull Chisel Roll 32 x 50cm
The Faithfull Chisel Roll is made from a hard wearing nylon backed polyester material which is double stitched at stress points and edged for extra strength. Contains pockets for various sized chisels and small tools and a zip-up compartment for storing small tools or paperwork. Three elastic loops are provided for secure pen or pencil storage. New improved design features wider pockets to fit chisels with or without blade guards. The chisel size is printed on the pocket for easy product selection.This Faithfull Chisel Roll has the following specification: Pockets: 8Dimensions: 32 x 50cm
£7.49
