New products

Faithfull heavy-duty clamps manufactured from a high-quality carbon steel bar with large malleable iron clamping heads. Clamp bars have a black oxide coating with powder-coated heads for complete rust protection. Other features include a high grade steel mainscrew with a wear resistant Acme thread, which applies pressure quickly and smoothly. Tail slides are easily adjusted and secured by a steel pin passing through one of the locating holes. Tail slide and heads are flat bottomed so that the clamp can stand upright without support.Capacity: 600mm

Read more less

Faithfull heavy-duty clamps manufactured from a high-quality carbon steel bar with large malleable iron clamping heads. Clamp bars have a black oxide coating with powder-coated heads for complete rust protection. Other features include a high grade steel mainscrew with a wear resistant Acme thread, which applies pressure quickly and smoothly. Tail slides are easily adjusted and secured by a steel pin passing through one of the locating holes. Tail slide and heads are flat bottomed so that the clamp can stand upright without support.Capacity: 1200mm

Read more less

This Faithfull Impact Screwdriver Bit Set contains 42 professional 1/4in hex drive impact bits that are specifically designed for use in high torque impact drivers. Manufactured from a unique material specially engineered for extreme durability, these bits have an increased working life compared to standard screwdriver bits. Impact bits are designed to distribute impacts evenly, preventing energy waste for efficient screwdriving, and incorporate torsion areas to absorb torque peaks, reducing stress at the bit tip during heavy loading. All bits feature a precision-machined tip to provide an optimum fit, helping to prevent screw stripping and cam-out. Supplied in a sturdy impact-resistant plastic storage case. Contains: 8 x 25mm Phillips Bits: PH1(x3), PH2(x3) and PH3(x2)12 x 25mm Pozidriv Bits: PZ1, PZ2(x8) and PZ3(x3)11 x 25mm Star Bits: TX10, TX15, TX20(x2), TX25(x4), TX27, TX30 and TX401 x 25mm Slotted Bit: 6mm 2 x 50mm Phillips Bits: PH1 and PH23 x 50mm Pozidriv Bits: PZ2(x2) and PZ33 x 50mm Star Bits: TX20(x2) and TX25 1 x Magnetic Bit Holder1 x Socket Adaptor

Read more less

These Forgefix Multipurpose Slotted Screws with raised heads have a chrome plated finish for increased durability.These screws have single threads, designed to offer higher pull-out values and quicker insertion.The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. Suitable for use with many materials including PVCu, Timber, Chipboard, MDF and other similar types.Specifications: Size: 4.0 x 40mmPack: ForgePack of 20

Read more less

The Faithfull extremely lightweight hawk in moulded polyurethane with a smooth surface finish. A hawk is a useful tray from which to apply plaster or cement quickly to a wall by using a trowel. Size: 13in/330mm Square.

Read more less

Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.Size: Blade length 127mm (5in)

Read more less

The Faithfull Multi-Tester is more than just a conventional voltage tester. The built-in battery powered sensor allows the multi-tester to perform a number of different functions without the need to dismantle a suspected faulty item or have any contact with live parts. The multi-tester is fully insulated and is supplied complete with full operating instructions and will perform the following tests: continuity, bulbs, fuses, short circuits, cable tracking, mains sockets and microwave oven leakage. SAFETY NOTEAlways read and the instruction supplied with the multi-tester.Never use a multi-tester until you are fully conversant with its use and applications. Never work on live equipment, and if in any doubt, always contact a qualified electrician.Do not use as a screwdriver

Read more less

Faithfull heavy-duty clamps manufactured from a high-quality carbon steel bar with large malleable iron clamping heads. Clamp bars have a black oxide coating with powder-coated heads for complete rust protection. Other features include a high grade steel mainscrew with a wear resistant Acme thread, which applies pressure quickly and smoothly. Tail slides are easily adjusted and secured by a steel pin passing through one of the locating holes. Tail slide and heads are flat bottomed so that the clamp can stand upright without support.Capacity: 900mm

Read more less

The Faithfull Combination Padlock has a solid brass body with a 4-pin brass tumbler mechanism. It has a hardened and plated steel shackle encompassing a self locking action. The 4-digit combination system can be simply changed at any time to any one of 10,000 possible combinations. To change the number, simply turn the shackle 180 degrees and push into padlock body and rotate the dials to the desired new number1 x Faithfull Brass Combination Padlock 38mm

Read more less

The HSS wavy set teeth on this Faithfull bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for cutting veneered and laminated boards as well as parquet in flooring and partition wall applications. Compatible with many multi-function oscillating power tools.

Read more less

This Faithfull Mains Tester Screwdriver is fitted with a neon indicator in the clear plastic handle which illuminates when the point of the tester is touched on a live voltage source. This mains tester is suitable for testing AC voltages from 125 to 250 volts against earth. The tip of the tester should be placed on the suspected live source, while finger touch contact is applied to the metal stud on the top of the handle. If the circuit or terminal contact point at the tip of the tester is live, the bulb will then light up as confirmation. Note: ALWAYS test the mains tester on a known live source before use, to determine that its indicator bulb is functioning correctly prior to use. WARNING: The earthing position of the user largely determines whether the tester bulb will illuminate or not. Failure to illuminate therefore does not provide 100% confirmation that no voltage is present.Size: 140 x 2.9mm.

Read more less

Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.Size: Blade length 57mm (2.1/4 in)

Read more less