New products

Knipex 74 02 Series High Leverage Diagonal Cutters for very tough, continuous use. Made from chrome vanadium, heavy-duty steel, forged, multi stage oil-hardened. The precision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire. Fitted with multi-component, soft grip handles that are lightweight and compact. They offer high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. 74 12 180 SB has a opening spring; to be activated if required.These Knipex High Leverage Diagonal Cutters have an opening spring; to be activated if required. Specification: Length: 180mmCutting Capacity (mm): Piano: 2.2, Hard: 2.7, Medium: 3.8

Read more less

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 9.5Adjustment 210 - 242mmAdjustment 8.1/4 - 9.1/2in

Read more less

J-B Weld PlasticWeld™ Epoxy Putty is hand-mixable and fast-setting, only 5 minutes. After mixing, it forms a polymer compound which can be moulded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. Resistant to water, chemicals and heat. Perfect for use on hard plastics, ABS, Fiberglass, PVC, Glass, Vinyl and other composites. Specifications: Bonding Strength: 3,900 PSI.Set Time: 25 Minutes.Cure Time: 3 Hours.Colour When Dry: Off White.Size: 57g.

Read more less

74 91 Series High Leverage Centre Cutters with an integrated forged axle for heavy-duty use. Made from chrome vanadium heavy-duty steel, forged, multi stage oil-hardened. The precision cutting edges additionally induction-hardened (cutting edge hardness approx. 62 HRC), for all sorts of wire including piano wire. Fitted with ergonomically PVC coated styled handles for added grip and comfort. Cuts thick wires with less effort than other diagonal cutters of the same length. They offer high cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Specification: Length: 250mmCutting Capacity (mm): Piano: 3.5, Hard: 3.8, Medium: 5.0

Read more less

Knipex 77 12 Series Electronic Diagonal Cutters with a round head, bevel and lead catcher - no uncontrolled loss of cut wire ends. For fine cutting work, e.g. in electronics and fine mechanics. Made from ball bearing chrome steel, oil hardened. Additionally laser hardened, cutter hardness at least 60 HRC. With a polish/mirror polish finish, together with a fine film of oil to offer effective rust protection. No circuit faults caused by peeling chrome from plated tools. Fitted with ergonomic multi-component grips for added grip and comfort. Narrow sleeves pulled up to the head of the pliers enable the tool to be guided securely and comfortably, also between thumb and index finger. There is also a low-friction double spring for gentle and even opening. Specification: Cutting Capacity (mm): Hard: 0.6, Medium: 1.2, Soft: 0.2-1.6Length: 115mm

Read more less

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 8.5Adjustment . 184 - 216mmAdjustment. 7.1/4 - 8.1/2in

Read more less

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 7Adjustment . 135 - 165mmAdjustment. 5.1/4 - 6.1/2in

Read more less

Knipex 78 03 Series Electronic Super Knips® are fitted with electrically discharging handles (dissipative). Ground, very sharp cutting edges without bevel, cutting edge hardness approx. 54 HRC. The precisely shaped tips cut wires close to a surface from Ø 0.2mm. Suitable for ultra fine cutting work, eg: in electronics and fine mechanics. Made from INOX tool steel with a stainless steel rivet joint for extremely smooth movement for minimum operator fatigue. Controlled micro cutting edge misalignment allows for precise cutting of even the thinnest of wires and for a long service life. Specification: Cutting Capacity (mm): Medium Hard: 1.0, Soft: 0.2-1.6Length: 125mmJaw Length: 9mmHead Width: 13.5mm

Read more less

The Knipex 74 06 Series High Leverage Diagonal Cutters are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. With an integrated forged axle for cutting all types of wire including piano wire. Made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. Precision cutting edges additionally induction-hardened, approx. 64 HRC. High cutting performance with minimum effort due to optimum co-ordination of the cutting edge angle and transmission ratio.1 x Knipex VDE High Leverage Diagonal Cutters 180mm Cutting Capacity: Medium: 3.8mm, Hard: 2.7mm, Piano: 2.2mm

Read more less

The Knipex TwistCut is suitable for cutting empty or ready assembled corrugated pipe with a diameter of 13-32mm. The exact flush cut blades quickly and easily cut corrugated pipes to length without damage and leave no sharp edges. Blades are recessed to avoid injury. The slim ergonomically designed body is made of a robust polyamide compound plastic whilst the double-sided guide ensures a precise cut. There is also a practical wire stripper. Ideal for the construction, plumbing and electrical trades, for cross-sections: 0.2, 0.3, 0.8, 1.5, 2.5, and 4mm². Specification: Pipe Capacity: 13-32mmWire Capacity: 0.2-4.00mmOverall Length: 100mmWeight: 46g

Read more less

The Knipex 81 Series Plastic Pipe Grip Pliers are great for siphons, tube fittings and connectors up to 80mm diameter. They have 25 adjustment positions and a box-joint design with an ergonomic handle geometry. The fine adjustment is ideal for adjustment to diverse diameters. They have a robust, heavy-duty design and are made from forged chrome vanadium electric steel that has been oil-hardened with serrated gripping jaws. The handles are fitted with a non-slip plastic coating. Ideal for tightening and loosening siphon screw connections, plastic pipe fittings and round union nuts. Also for connectors and couplings with a screw connection, such as Cannon circular connectors and for gentle loosening of hoses on nozzles. 81 01 250 SB: Black Atramentised Finish. 81 03 250 SB: Chrome Finish. Specification Length: 250mm. Adjustment Positions: 25.Capacity: 25-80mm. Weight 355g.Knipex 81 01 250 SB Plastic Pipe Gripping Pliers have a black atramentized finish.

Read more less

Knipex Series 77 Electronic Diagonal Cutters with a round head, non-bevelled. Ideal for fine cutting work, e.g. in electronics and fine mechanics. Precision-ground cutting edges for flush cutting and low friction double spring for gentle smooth closing and opening. The cutting edges are separately induction hardened to approximately 62HRc. Made from ball bearing chrome steel, oil hardened with a polish/mirror polish finish, together with a fine film of oil to offer effective rust protection. No circuit faults caused by peeling chrome from plated tools. A stainless steel rivet joint provides extremely smooth movement for minimum operator fatigue. Fitted with ergonomic multi-component grips for added grip and comfort. Specification: Cutting Capacity (mm): Medium: 1.0, Soft: 0.2-1.3Length: 115mm

Read more less