New products
Vaughan Vaughan B215 SuperBar® 380mm (15in)
The Vaughan SuperBar with 'Shepherd's Crook' rocker head for maximum prying power. Forged from spring tempered steel with 3 bevelled nail slots and polished, sharp blades for easy insertion. Perfect for prying mouldings, scraping and pulling nails. Made in the USA.1 x Vaughan B215 SuperBar 380mm (15in)
£17.99
-
Vitax Vitax Nippon Ant Killer Liquid 25g (Display of 30)
For the control of common black ants in and around the home. Nippon Ant Killer Liquid is a sugary bait formulation designed to attract worker ants to take the bait and feed it to the whole colony. This product is particularly useful when the nest site is unknown or inaccessible. Apply at the first signs of ant activity (normally early spring) How to use: Remove readily available foodstuffs. Pierce the sachet and apply a few drops of liquid, preferably in late evening, to a non-absorbent surface by the ant run. Change the bait daily until ant activity ceases. Do not disturb feeding ants as it is essential that feeder ants take the bait back to the nest to the rest of the colony. An effective dose is usually built-up within the colony over 7-10 days depending on the size of the ant colony and the frequency of ant feeding. Nippon liquid destroys complete ant colonies without trace. Contains Spinosad. Always read the label: use pesticides safely. Counter display of 30 packs (25g per pack).
£96.49
-
Vitax Vitax Tomato Feed 1 litre
A high potash fertilizer for bumper crops of juicy tomatoes. NPK 4.5-4-5.9 Can be used on tomatoes grown outdoors, indoors, under cover and in grow-bags. Apply: in the spring and throughout the growing season. How to Use: Mix with water and apply to individual plants according to the instructions on the pack. Feed tomatoes in grow-bags weekly according to the pack instructions until the second truss has set, then increase the application to twice weekly. For outdoor tomatoes apply the feed every 14 days per plant, rising to every 7 days after the second truss has set. For tomatoes under cover, apply the feed when the second truss has set every 7 days.
£4.99
-
Vitax Vitax Nippon Wasp Nest Powder 300g
The Nippon Wasp Nest Powder provides rapid and effective control of wasp nests. Apply dust liberally into or around the nest in piles at the nest entrance. It is suitable for indoor and outdoor use. Contains: Permethrin.
£5.49
-
Vaughan Vaughan AP22 Prospecting Pick Polished All Steel 620g (22oz)
The Vaughan Prospecting (Rock) Pick forged from solid high carbon steel for excellent strength. It has a flat, smooth striking face and a tapered, sharp point for chipping rock and masonry. For comfort, the pick has an exclusive air cushioned, slip-resistant grip. Made in the USA. Specifications: Weight: 620g (22oz)Handle length: 330mm (13in)
£39.49
-
Trend Trend 46/80 x 1/4 TCT 90° Bearing Guided Triple Flute Cutter 12.7 x 25.4mm
Self-guiding triple flute cutters provide a super fine finish and longer life. Suitable for laminate or plywood overlay.An industrial profiling tool for longer runs of work when a clean finish is needed. Tooling : T.C.T.1/4in Shank.. A Angle = 90° C = 25.4 mmD = 12.7 mm
£40.49
-
Trend Trend 46/09 x 1/2 TCT 90° Shank Mounted Template Profiler 19.1 x 50mm
Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2 in Shank. Angle A = 90° D = 19.1 mmC = 50 mm
£83.99
-
Trend Trend 46/38 x 1/2 TCT Bearing Guided Chamfer 45° 50 x 19mm
These types of cutters are used for edging work and chamfer cutting on man made fibre boards, natural timbers and plastics. Tools are offered to produce various angles for chamfering. Ball bearing and pin guarded cutters enable curved work to be undertaken with bearings running along the board edge or a template. Typical trade applications include sign making, freehand engraving, cabinet making and decorative joinery.T.C.T.1/2in Shank.A = 45° C1 = 19 mmC2 = 26 mmD = 51.5 mmB = 12.7 mm
£102.99
-
Trend Trend 47/4 x 1/4 TCT Pierce & Trim Cutter 6.3 x 18mm
This Trend 47/4 x 1/4 TCT Pierce & Trim Cutter will pierce and cut out an aperture in laminate worktops. The base of the cutter acts as a guide follower. Specifications: Single Flute cutter.Cutting Length: 18mm.Diameter: 6.3mm.Shank. 1/4in.
£29.99
-
Trend Trend 46/05 x 1/4 TCT 90° Template Profiler 6.3 x 12.7mm
Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank. Angle A = 90° D = 6.3 mmC = 12.7 mm
£30.49
-
Trend Trend 50/06 x 8mm HSSE Helical Plunge Bit 6mm
Tooling for use on webbed aluminium and UPVC extrusions by window and door fabricators. Cutters are produced in special high speed steel (HSSE) to ensure a clean cut and resist the abrasive nature of anodised aluminium extrusions. Cutters are designed to plunge and machine or mill lateral slots All tooling for aluminium should be used with a coolant, wax stick, or lubricant. The material being worked on should always be securely clamped in a machine vice. HSSE.One Flute helical Plunge-slotting bit.8 mm Shank.D = 6 mmC = 14 mmOL = 60 mm
£27.49
-
Trend Trend 46/140 x 1/4 TCT Bearing Guided Ovolo & Round Over 9.5mm Radius
Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile.This Trend TCT Bearing Guided Ovolo & Round Over has the following specification: Radius: 9.5mmDiameter: 32mmCutter Height: 16mmShank: 1/4inBearings: 9.5, 12.7mm
£69.99
