New products

Ronseal Diamond Hard Doorstep Paint restores and rejuvenates brick, concrete, stone and wood to give ultra tough protection and additional slip resistance. There's no primer required and it resists knocking, scuffing, scraping and provides protection from oil, grease and water. Have a smarter and safer doorstep, this paint is incredibly hard wearing, Diamond Hard takes foot traffic in its stride, giving you a non-slip finish for years. It is ideal for use on interior and exterior brick, concrete, stone and wood. Not suitable for ceramic floor tiles. Areas of use: Brick, stone or concrete steps.Coverage: Approx. 12m² per litre.Average number of coats: 2.Finish: Satin.Application: Brush, Roller.Drying time approx.: 2 hours.Protection level: Very High. Two Colours Available: Red or Black.Ronseal Diamond Hard Doorstep Paint Black, 250ml, restores and rejuvenates brick, concrete, stone and wood to give ultra tough protection and additional slip resistance. There's no primer required and it resists knocking, scuffing, scraping and provides protection from oil, grease and water. Have a smarter and safer doorstep, this paint is incredibly hard wearing, Diamond Hard takes foot traffic in its stride, giving you a non-slip finish for years. It is ideal for use on interior and exterior brick, concrete, stone and wood. Not suitable for ceramic floor tiles. Areas of use: Brick, stone or concrete steps.Coverage: Approx. 12m² per litre.Average number of coats: 2.Finish: Satin.Application: Brush, Roller.Drying time approx.: 2 hours.Protection level: Very High. Two Colours Available: Red or Black.

Read more less

The Rohm morse taper Ejecting Drift for use in the removal of morse taper chucks. For removing morse taper sleeves, arbors and tooling. Three sizes are available to cover the different sizes of morse tapers.The Rohm 903 morse taper Ejecting Drift for use in the removal of morse taper chucks. The 903 is also for removing morse taper sleeves, arbors and tooling. Three sizes are available to cover the different sizes of morse tapers. Specifications: Size: 3MT/4MT.

Read more less

ROCOL Gasseal Non-Setting Sealant is a non-setting pipe sealant used for metallic threaded joints. Non corrosive to aluminium, brass, copper, low carbon steel and zinc. Suitable for use with natural gas and LPG pipework. Joints can be assembled and pressure tested immediately. Resists vibration. Compatible with foam forming leak testers. Independently tested by BSI to BS EN 751-2: 1997 Part 2 Class B. Specification Temperature Range: -20° C to + 125°C

Read more less

The RIDGID 975 Roll Groover acts as 2 tools in one. It can mount onto the 300 Power Drive for machine powered roll grooving but is also designed to manually roll groove in-place pipe. The 975 Combo Groover includes new, patented auto tracking technology for significantly easier grooving. Whether you're doing machine-powered or manual grooving, the Auto Tracking gauge keeps the pipe automatically engaged to the groover throughout the grooving process. The 975 also includes a permanently depth setting gauge for quicker, repeatable set-up. When manually roll grooving, the 975's 55% higher gear reduction means less hand force required versus competitive manual roll groovers. This is especially helpful for over-head roll grooving. A tough, ductile iron construction means the 975 can absorb jobsite abuse and provide accurate grooves time after time. A cast-in handle makes the 975 easily portable to and from the jobsite. Capacity: 1 ¼in – 6in Schedule 10 and Schedule 40 steel, aluminium, and PVC pipe.1 1/4in – 6in Schedule 10, 1 1/4in – 2in Schedule 40 stainless steel pipe, 11/2in – 3in Schedule 80 PVC pipe. With roll change, 2in – 8in copper tube (Type K, L, M, and DWV).Depth Adjustment: Adjusting screw and integral, index depth gauge.Actuation: Feed screw with 1/2in ratchet wrench (included), or any 15/16in hex wrench. Power Drive Mounting: RIDGID 300 Power Drive 38/57 RPM (reverse direction only).

Read more less

ROCOL CHAIN & DRIVE Spray is a highly versatile, high performance, chain lubricant spray suitable for all types of drive and conveyor chains in a convenient aerosol can. The unique formula is designed to ensure maximum performance for penetration, lubrication and exceptional corrosion protection in hostile environments. In-house laboratory tests demonstrate that after undergoing 200 hours at 35 degrees Celsius ROCOL CHAIN & DRIVE Spray shows unbeatable corrosion protection with no signs of corrosion. Specification Temperature Range: -30° C to + 150° C

Read more less

SAPPHIRE® Hi-Load 2 Bearing Grease is a heavy-duty soap grease containing molybdenum disulphide for maximum bearing life. It offers extreme load and wear performance with extended lubrication intervals. Ideal for slow-moving bearings subjected to heavy loads, shock and vibration. Specification: Temperature Range: -30°C to +150°C.1 x ROCOL SAPPHIRE® Hi-Load 2 Bearing Grease 400g

Read more less

Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling.Size. 4mm x 0.7 Length. 1 1/2 x Diameter.

Read more less

Recoil Inserts are made from high quality stainless steel wire, with a diamond shaped cross section wound to the shape of a spring thread. The insert, which is larger in diameter than the tapped hole, is compressed during installation then allowed to spring back permanently anchoring the insert in the tapped hole. Because of its larger diameter the recoil insert has a greater contact area and is normally stronger than the original thread.Size. M10 x 1.5 Pitch.Length. 1 1/2 x Diameter.

Read more less

Recoil Inserts are made from high quality stainless steel wire, with a diamond shaped cross section wound to the shape of a spring thread. The insert, which is larger in diameter than the tapped hole, is compressed during installation then allowed to spring back permanently anchoring the insert in the tapped hole. Because of its larger diameter the recoil insert has a greater contact area and is normally stronger than the original thread.Size. M12 x 1.75 Pitch.Length. 1 1/2 x Diameter

Read more less

Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplifiy changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling.Size. 14mm x 1.25 Length. 19mm (3/4 in).

Read more less

Recoil inserts are the quick and easy way to repair damaged threads or creating stronger original threads in alloys, composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, creates stronger threads in most materials, simplifies changeover from unified to metric or vice versa.Reduces thread wear, is interchangeable with other brands of inserts or tooling.Wide temperature tolerance.Size. 10mm x 1.25Length 1 1/2 x Diameter.

Read more less

Recoil inserts are the quick and easy way to repair damaged threads or create stronger original threads in alloys and composite materials in original equipment manufacture.Made from corrosion resistant stainless steel, they create stronger threads in most materials and simplify changeover from unified to metric or vice versa.They reduce thread wear and are interchangeable with other brands of inserts or tooling.Size. 12mm x 1.75 Length. 1 1/2 x Diameter.

Read more less