New products

ROCOL FOODLUBE® Dismantling Spray is a non-toxic, fasting-acting penetrating lubricant for corroded threaded fasteners and other seized components. Short-term corrosion protection is provided by a light, residual film. With a wide operating temperature range from -20°C to +110°C. Its fast acting formula provides quick effective release of seized and corroded threaded fasteners. Only use in well ventilated areas and do not apply to very hot surfaces. Does not contain: mineral hydrocarbons, animal derived materials, nut oils or genetically modified ingredients. Store below +50°C, out of direct sunlight, has a shelf life is 5 years from date of manufacture. NSF H1 registered for incidental contact with food, making it ideal for use in the food, pharmaceutical and other clean industries where a non-toxic product is required or preferred. It is also ISO 21469, Halal and Kosher certified.

Read more less

The Ridgid DM-100 Micro Digital Multimeter is a True RMS and AutoRanging unit, which provides accurate and fast measurements in all applications. It features 11 different electrical functions ranging from AC/DC Voltage and Current (1,000 volt) to temperature measurements. The multimeter has a double moulded water-resistant (1m) IP67 housing. It is also drop-proof and perfectly suitable for use in the harshest job site conditions. An extra large backlit LCD display provides easy and clear readings. The DM-100 is rated for industrial use (CAT III-1000V and IV-600V). Supplied in a soft carrying case with double-moulded test leads, Type K temperature probe and a 9V battery. Functions and Range: Voltage AC/DC: 400.0mV - 1,000V.Current AC/DC: 400.0µA - 10A.Resistance: 400.0 - 40.00M.Capacitance: 4.000nF - 200.0µF.Frequency: 9.999Hz - 9.999MHz.Duty Cycle: 0.1% - 99.9%.Diode Check: 1.5V.Continuity Test: 150.Temperature: -20°C - 760°C. Specifications: Power Source: 9V battery (included).Display: 4000 Count Backlit LCD.Overload Protection: CAT III and IV1,000V/600V.Fuses: 0.5A and 10A - 1,000V.Insulation: Class II, double moulded.IP Rating: IP-67 water-resistant (1m).Polarity Indication: Yes, automatic.Auto Power-Off: Yes, after 15 minutes.AutoRanging: Yes.Manual Ranging: Yes.True RMS: Yes.

Read more less

The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. They can cut through copper, brass, aluminium and thin-wall steel. Models 10, 15 and 20 feature a convenient fold-away reamer.RIDGID Heavy-Duty Screw Feed No.20 Tubing and Conduit Cutter Capacity: 16-54mm (5/8 - 2.1/8in)Std. Wheel: E-1240.Weight: 0.79kg.

Read more less

ROCOL ANTI-SEIZE Stainless is a nickel-free paste that offers excellent anti-seize properties. Does not contain copper and exhibits extremely low sulphur and chlorine levels. Provides even torque and prevents galling and pick-up on assembly. Protects against wet conditions and chemical attack Specifically designed for stainless steel, nimonic and silver-coated fasteners, particularly those subjected to high temperatures for long periods in the aerospace, automotive and power generation industries. Ideal for use on aerospace alloys. Specification Temperature Range: - 40°C to + 1,000°CCoefficient of Friction: 0.085

Read more less

Ronseal High Performance Wood Filler is a chemically bonded filler and catalyst that provides extremely tough repairs to virtually any wood damage without shrinking or cracking. Fills to any depth and can be drilled, screwed or planed. Ideal for use in interior or exterior wood repairs more than 5mm deep. Typical areas include window frames, sills, doors and door frames. For minor and surface wood repairs use Ronseal Multi Purpose Wood Filler. Available in: Natural, Dark or White. Application: Filling Knife.Drying Time: approx 30 mins.Protection Level: Very High.The Ronseal RSLHPWFD275G is supplied in a tub with re-sealable lid. Colour - Dark.Size: 275g.

Read more less

Ronseal Garden Paint has been designed to add colour to the whole garden, and not just on wood. It can also be used on other garden substrates such as metal (primer may be needed), terracotta, brick and stone. It adds colour, waterproofs and improves water repellency. Its high solid content leads to a high film build and longer lasting protection. It is rainproof in an hour and will resist cracking and peeling. Available in many colours.1 x Ronseal Garden Paint Lime Zest 250ml

Read more less

A next generation lightweight interior and exterior filler based on acrylic polymer and hollow ceramic microspheres.Robust macromolecular structure which gives virtually no shrinkage. Filling deep holes without sagging isn't easy but with Ronseal BHF12L Big Hole Smooth Finish Filler it is. Specially designed to fill any hole up to 50mm deep, it's a high performance filler that's easy to apply and gives a perfectly smooth finish. When dry, it can be drilled, screwed or nailed. For use in repairing plaster, stone concrete or wood.Long lasting tough repair.Extremely smooth finish.Ronseal applicator included.Very good adhesion.Easy to sand.Application: Filling Knife. Surface dry in 1 to 2 hours.Fills holes up to 50mm deep.Will accept drills, screws and nails when fully dry.Protection level: High. Size: 1.2 litre

Read more less

This Colron Danish Oil is a superior blend of natural oils that penetrate the wood to provide an extremely tough, durable waterproof finish, while enriching the wood grain to provide a beautiful low sheen lustre. It enriches the wood's natural patina while providing protection from the inside out, making it ideal for use on both interior and exterior wood. Specification: Size: 500ml

Read more less

ROCOL DRY MOLY PASTE is a high purity, extreme load dry film molybdenum disulphide paste designed for use where a wet lubricant cannot be tolerated. This assembly lubricant is ideal for sliding surfaces, such as plain bearings, pins, cams and slides. It reduces friction and therefore increase life of moving parts in highly corrosive environments. DRY MOLY PASTE can also be used in conjunction with a wet film lubricant enhancing performance and extending life of components and assemblies. Rolls Royce, RAF, Naval and NATO approved Specification Temperature Range: -50°C to + 450°CLoad Resistance: up to 7,000 kg/cm21 x ROCOL DRY MOLY PASTE Tin 750g

Read more less

Ronseal Garden Paint has been designed to add colour to the whole garden, and not just on wood. It can also be used on other garden substrates such as metal (primer may be needed), terracotta, brick and stone. It adds colour, waterproofs and improves water repellency. Its high solid content leads to a high film build and longer lasting protection. It is rainproof in an hour and will resist cracking and peeling. Available in many colours.This Ronseal Garden Paint, in Bluebell and 2.5 litre in size, has been designed to add colour to the whole garden, and not just on wood. It can also be used on other garden substrates such as metal (primer may be needed), terracotta, brick and stone.Its high solid content leads to a high film build and longer lasting protection.While this Ronseal product is rainproof in an hour and will resist cracking and peeling. Specifications: Size: 2.5L.Colour: Bluebell.

Read more less

Ronseal Diamond Hard Floor Wax is a unique high performance wax that provides a natural finish and superb protection against scratches, scuffing and household chemicals. This wax is ideal for use on any type of wooden floor and has the following specifications:Areas of use: Wooden floorsCoverage: 20m2 covered per litreNumber of coats: 3Finish: Wax finishApplication: BrushDrying time: 30 minsProtection level: Very highThe Ronseal RSLDHFWN25L Diamond Hard Floor Wax comes in the following:Finish: NaturalSize: 2.5 litre

Read more less

ROCOL SAPPHIRE® Aqua 2 Bearing Grease is a high performance grease designed to give superior resistance to water washout. For use in all types of ball, roller and plain bearings. SAPPHIRE Aqua 2 excels in applications such as scrapers, rakes, dockside cranes, water pumps, boat trailers and similar applications where bearings, pins, bushes, slides, etc. are subjected to extreme wet conditions. Specification Temperature Range: - 20°C to + 150°C

Read more less