New products

Bahco Slip Joint Pliers with parallel action jaws with an accurately machined joint which will not slip under load, when used on workpieces of various shapes. The pliers are made from high performance alloy steel and have a black, anti-rust finish. They have plastic coated handles for increased comfort in use. Parallel, hardened jaws with both flat and pipe gripping jaws. The jaws grip parallel in all positions up to the maximum jaw opening width. Replaceable bolt joint available.1 x Bahco 225 D Screw Joint Water Pump Pliers with PVC Coated Handles 300mm.

Read more less

Bahco Insulated side cutting pliers have progressive edges, the cutting radius progresses along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper and plastic insulated wire at the tip. Has a screw joint that provides excellent running and accurate alignment of the cutting edges. The distance from the joint to the centre of the cutting edges is reduced, giving greater leverage and increased cutting capacity. Have a black, anti-corrosion treated finish made from high performance alloy steel, and have plastic injected handles. Induction hardened cutting edges, and round shaped jaws give improved accessibility in confined spaces. Conform to ISO 5749, and IEC 60900 standards.Size: 140mm (5 1/2 in)Cutting capacity: Piano wire 1.6mm.

Read more less

Bahco ERGO™ Insulated Pliers with 45° bent, half-round serrated jaws for gripping flat and round material. The hardened cutting edges are suitable for cutting soft and hard wire. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards. Specification: Length: 200mm (8in)Cutting Capacity: Copper 3mm, Iron 1.8mm, Iron Alloy 1.6mm

Read more less

Bahco ERGO™ Handled Double-Ended Saw File for sharpening saws with fine cross tooting. The surfaces and edges are single cut from both ends towards the centre. With triangular, untanged, edges tapering towards both ends. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process.This Bahco ERGO™ Handled Double-Ended Saw File has the following specification: Length: 175mm (7in)File Width: 6mmTeeth per cm: 23

Read more less

This Bahco Taper Saw File has a triangular shape, with edges tapering towards the point. The surfaces and edges are single cut. Ideal for sharpening saws with universal teething and teeth at a 60° angle. Available only in second cut. Size 150mm (6in)Width: 12.5mmTeeth per cm: 17

Read more less

Bahco Raker Tooth Hard Point Bowsaw Blade are ideal for cutting in green wood. Made from hardened and tempered high quality steel with high frequency, induction hardened peg toothing. They have been treated with a rust prevention coating and packed in individual sleeve printed with graphically illustrated text for correct blade selection. Will fit most makes of bowsaw frame.1 x Bahco 23-36 Raker Tooth Hard Point Bowsaw Blade 900mm (36in)

Read more less

Bahco Slim Taper Saw File, has a triangular shape with edges tapering toward the point. The surfaces and edges single cut. For sharpening all types of saws with fine cross toothing. Available only in second cut. Size: 150mm (6in).Size 125mm (5in).Side: 9/32in. Type: slim taper saw file.

Read more less

For sharpening circular, felling and gang saws with fine toothing and also used on bandsaws.Excellent for draw and fine filing, polishing and deburring work. Often used in the engineering industry for lathe, deburring or draw filing.Type 138 has one round edge, Type 140 has two round edges. Type 138 has one round edge.Type 140 has two round edges.Millsaw bastard cutSize 200mm (8in)Tanged

Read more less

Bahco 1RM Series Ratcheting Combination Wrench with a 12-point Dynamic-Drive™ profile provides longer life for screws and nuts. Both ends are angled at 15°, the open end has a slimmer head for improved accessibility, whilst the ratchet ring end offers knuckle clearance and increased grip. They offer a 5° action angle with a switch for quick change of right and left direction. Made from high-performance alloy steel with a chrome-plated, micro-matt finish. All sizes feature large, bi-directional size markings for easy identification. Conforms to ISO 1711-1 and DIN 3113.1 x Bahco 1RM Ratcheting Combination Wrench 17mm

Read more less

The Bahco ERGO™ Side Cutting Pliers are made from high-performance steel, with a black anti-corrosion finish and edges which are induction hardened at 62 HRC. They have 2-component combination handles - thermoplastic surface on tough polypropylene which gives a superior grip. Progressive edges allow the cutting radius along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper and plastic insulated wire at the tip. The screw joint provides excellent running and accurate alignment of the cutting edges. The distance from the joint to the centre of the cutting edges is reduced, giving greater leverage and increased cutting capacity. The round shaped jaws give improved accessibility in confined spaces. The pliers are equipped with a return spring featuring an on/off function. The ON-OFF return spring increases ease of cutting with an automatic opening of the jaws. For transport or storage, the spring function can be safely deactivated when not in use.The Bahco 2101G-125 pliers have an overall length of 125mm. Cutting Capacity: Cu: 3.5mm, Fe+: 1.8mm, Piano Wire: 1.6mm.Weight: 105g.

Read more less

Bahco ERGO™ Handled Double-Ended Saw File for sharpening saws with fine cross tooting. The surfaces and edges are single cut from both ends towards the centre. With triangular, untanged, edges tapering towards both ends. Fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO™ process.This Bahco ERGO™ Handled Double-Ended Saw File has the following specification: Length: 150mm (6in)File Width: 6mmTeeth per cm: 23

Read more less

Bahco 1RM Series Ratcheting Combination Wrench with a 12-point Dynamic-Drive™ profile provides longer life for screws and nuts. Both ends are angled at 15°, the open end has a slimmer head for improved accessibility, whilst the ratchet ring end offers knuckle clearance and increased grip. They offer a 5° action angle with a switch for quick change of right and left direction. Made from high-performance alloy steel with a chrome-plated, micro-matt finish. All sizes feature large, bi-directional size markings for easy identification. Conforms to ISO 1711-1 and DIN 3113.1 x Bahco 1RM Ratcheting Combination Wrench 13mm

Read more less