New products

Blackfriar Exterior Woodstain stains, protects and finishes exterior timber. It can be used on all hard and softwoods. Its weather-resistant, water-repellent satin finish resists flaking, peeling and cracking. It is also Microporous, so it lets the timber breathe. For hard and soft woods. Application Method: Brush or roller. Coverage: 14m²/L/Coat.Touch Dry: 2-4 hours.Hard Dry: 7 days.Recoatable: 16 hours.Blackfriar Traditional Exterior Woodstain Golden Teak 1 litre

Read more less

Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints. Specifications: Resin: Dimethacrylate.Colour: Brown.Fixture Speed No Activator: 10 - 20 mins. Fixture Speed With Activator: <5 mins. Spindle 2 @ 2.5 rpm: 1000 to 2750 cps.Spindle 2 @ 20rpm: 400 to 800 cps.Gap fill: 0.05mm to 0.25 mm.Flash point: >100°C.Shelf life: 2 Years @ 20°C.Specific gravity: 1.06.Max operating temp: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours.Typical breakway ISO 10964: 15 N.m.Typical prevailing ISO 10964: >8 N.m.DIN 10964 Breakloose: 24 N.m.DIN 10964 Prevailing: 15 to 35 N.m.Typical Break and Prevailing: 20N.m/15N.m.Bondloc Hydraulic Seal Pneumatic Fittings. Size: 50ml.

Read more less

Bondloc Gasket Seal Type B518 is a Red, smooth, thick paste. Easily applied, cures once confined between the parts to form in place a tough, flexible gasket. Gives an instant low pressure seal. Used for fuel and water pumps, split crank cases on engines, gearbox covers, engine thermostats, air compressor end caps, engine timing cam covers onto blocks, pump couplings, fuel tanks on small implements, chain saws, lawn mowers etc. Use B518 for dressing gaskets, spacers etc. Specifications: Resin: Modified Urethane Acrylate.Colour: Red Paste.Fixture Speed No Activator: Up to 12 hours.Fixture Speed With Activator: <2 hours.Viscosity: >3,500,000 cps.Gap fill: 0.5 mm.Flash point: >100°C.Shelf life: 12 months @ 20°C.Specific gravity: 1.13.Max operating temp: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours.Tensile strength: 8 N/mm(2).Static Shear strength: 12.5 N/mm(2). Size: 50ml.

Read more less

Bondloc B270 Studlock is a permanent green coloured general-purpose adhesive for permanent threaded assemblies. B270 locks studs up to 1in, sealing against leakage and corrosion. It is chemical-resistant, resisting fuels, lubricants and most industrial liquids and gases. It eliminates double nutting and/or welding of critical assemblies. It also permits reduced casting thickness and ultimate lightness, reduced assembly stress and eliminates cracked castings due to interference fit stresses. Specifications: Resin: DimethacrylateColour: GreenFixture Speed No Activator: 10 min.Fixture Speed With Activator: 5 min. Viscosity: 500 cpsGap fill: 0.25mmFlash Point: >100°CShelf Life: minimum 12 monthSpecific Gravity: 1.06.Max Operating Temperature: -55°C to +180°C Cured Performance: Full Cure Time: 12 hours.Cure Time with good % of final strength: 2 hoursTypical Breakaway Strength DIN : 40 Nm (25/55)Typical Prevailing Strength DIN : 55 Nm (45/70)Typical Breakaway ISO 10964: 26 Nm (16/36)Typical Prevailing ISO 10964: 36 Nm (22/50)Bondloc Studlock High Strength Threadlocker Size: 50ml.

Read more less

Blackfriar Super Yacht Varnish is perfect for protecting exterior wood and joinery against extreme climatic conditions. Its superb durability makes it perfect for buildings which take the worst of the weather and is of course ideal for yachts and boats. Application Method: Brush and Roller. Coverage: Approx. 14m² per litre.Touch Dry: 4-6 hours.Hard Dry: 3 days.Recoatable: 12 hours.Blackfriar Super Yacht Varnish. Size: 500ml.

Read more less

Bondloc B641 is a single part anaerobic securing compound, designed for fitting cylindrical metal assemblies and cures when confined between the parts. It will secure all types and sizes of bearings, shafts and cylindrical parts which will require disassembly in the future. It is medium strength and is colour-coded yellow for job identification. Specifications: Resin: Mod. Dimethacrylate.Colour: Yellow. Fixture Speed No Activator: 10-15 mins.Fixture Speed With Activator: <5 mins. Viscosity: 400-800 cps.Gap fill: 0.2 mm. Flash Point: >100°C. Shelf Life: 12 month min.Specific Gravity: 1.06.Max Operating Temperature: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours.Static shear strength: 12N/mm².ISO 10123 pin/collars range: 1-16 N/mm(²).Bondloc Bearing Fit Retaining Compound. Size: 10ml.

Read more less

Blackfriar Quick Drying Acrylic Primer Undercoat is ideal for use inside and outside the home. It dries quickly, so you can apply a second coat after just 4 hours, enabling you to finish the whole job in one day. It is suitable for bare woodwork, hardboard, masonry, dry plaster and cement. Application method: Brush or spray. Coverage: 14m²/L/CoatTouch Dry: 1-2 hoursHard Dry: 3 daysRecoatable: 4 hoursThe Blackfriar BKFWAP250 Quick Drying Acrylic Primer Undercoat comes in the following:Colour: White.Size: 250ml.

Read more less

Blackfriar Quick Drying (Duratough) Interior Varnish transforms interior wooden surfaces. Available in a range of natural shades, it provides a hard-wearing, quick drying finish. The varnish is suitable for all woods. It is resistant to heat, knocks and diluted acids. Water-based formulation.Blackfriar Quick Drying Duratough Interior Varnish Clear Satin 250ml

Read more less

Blackfriar Exterior Woodstain stains, protects and finishes exterior timber. It can be used on all hard and softwoods. Its weather-resistant, water-repellent satin finish resists flaking, peeling and cracking. It is also Microporous, so it lets the timber breathe. For hard and soft woods. Application Method: Brush or roller. Coverage: 14m²/L/Coat.Touch Dry: 2-4 hours.Hard Dry: 7 days.Recoatable: 16 hours.Blackfriar Traditional Exterior Woodstain Nut Brown 1 litre

Read more less

Bondloc B3294 is a toughened structural adhesive formulated for bonding dissimilar substrates as well as unprepared metals, ceramics, wood, concrete and standard thermoset plastics. The final adhesive bond is designed to be load-bearing and resistant to weathering, humidity and wide temperature variations. Applications: Outdoor weathering or solvent exposure thermoformed plastic assemblies, PVC, fibreglass, vinyls, ABS, steel aluminium, stainless steel, acrylics, phenolic, polycarbonate, styrenics, Noryl, PET, wood, concrete and ceramic magnet and speaker assembly. Specifications: Viscosity: 55,000cpsColour: Off whiteWeight: 8.44 lbs/galMixed Density: 8.28lbs/galFlash Point: 51°FMixed Viscosity: No sagging gelOpen Time: 3 minutes @ 72°F, 22°CAssembly Time: 6 minutes @ 72°F, 22°CFunctional Cure: 3/4-1 hourFull Cure: 4 hoursSolvents: NoneCoverage: (based on 25ml) 152 sq.in @ 0.010in

Read more less

Blackfriar Wood Primer is an aluminium wood primer for hardwoods, which prevents bleed through fresh paintwork. Specifically formulated for painting new or old bare hard or resinous woods. For interior and exterior use. Application method; brush, roller and spray. Coverage: 14m²/L/CoatTouch Dry: 2-4 hoursHard Dry: 3 daysRecoatable: 16 hoursBlackfriar Wood Primer Aluminium. Size: 500ml.

Read more less

Blackfriar Quick Drying (Duratough) Interior Varnish transforms interior wooden surfaces. Available in a range of natural shades, it provides a hard-wearing, quick drying finish. The varnish is suitable for all woods. It is resistant to heat, knocks and diluted acids. Water-based formulation.Blackfriar Quick Drying Duratough Interior Varnish Clear Matt 500ml

Read more less