New products

A fast drying, water-resistant, PVA wood adhesive with a bond strength stronger than the wood itself. For use as a general purpose, joinery adhesive, or for applications where long term resistance to moisture is a pre-requisite of the adhesive. Conforms to the requirements of category D3/3 and D3/4 of EN204. Meets the resistance to sustained load (creep test) requirements of BS 4071 “Polyvinyl Acetate (PVA) Emulsion Adhesives for Wood".Rapid bond strength development. Suitable for hard and soft woods, decorative laminates, chipboard, blockwood and other engineered timber panels. Can be used in applications where joints may be subjected to short term water contact or exposure to high humidity i.e. kitchen work surfaces, window frames, doors and stairs, but not permanent immersion in water. Suitable for interior and exterior applications.

Read more less

A fast drying, water-resistant, PVA wood adhesive with a bond strength stronger than the wood itself. For use as a general purpose, joinery adhesive, or for applications where long term resistance to moisture is a pre-requisite of the adhesive. Conforms to the requirements of category D3/3 and D3/4 of EN204. Meets the resistance to sustained load (creep test) requirements of BS 4071 “Polyvinyl Acetate (PVA) Emulsion Adhesives for Wood".Rapid bond strength development. Suitable for hard and soft woods, decorative laminates, chipboard, blockwood and other engineered timber panels. Can be used in applications where joints may be subjected to short term water contact or exposure to high humidity i.e. kitchen work surfaces, window frames, doors and stairs, but not permanent immersion in water. Suitable for interior and exterior applications.

Read more less

A pre-mixed render based on sand, lime, cement and additives. A moderate strength render for moderate strength backgrounds and moderate exposure conditions. Features & Benefits:- Weather resistant - Allows walls to breathe - Resists penetrating damp - Will not chip, flake or peel - Can be hosed down- Tough and flexible - Excellent adhesion. CE Approved. A 25kg bag of Bond It Universal Building Render should be mixed with 4-5L of clean water using a mechanical stirrer. Best results are obtained using as little water as possible. The product may stiffen on standing. Do not add more water; simply re-mix to regain a workable consistency. Use a hawk and trowel to apply product in a single operation. On low suction backgrounds a first pass may be necessary prior to building up the full thickness in the second pass. Refer to technical data sheet for full application details.

Read more less

An alkali resistant glass fibre woven mesh, ideal for reinforcement of render or basecoat plaster. An ideal anti-crack reinforcement for rendering systems. For use in construction; mainly to reinforce concrete, cement, screeds and renders, ETICS external wall insulation systems with acrylic, polymeric, silicon, silicate and mineral renders, cracking surfaces repairs and tiling (as reinforcement). Offering incredible strength when embedded into wet base coat renders and is light, economical, tear resistant and easy to use. Stabilises surfaces and prevents cracking. Can be used with Bond It Universal Building Render (BDER25). Apply an even background coat of render to the required thickness. Place the mesh into the wet render and lightly press in with a trowel to completely cover the mesh. Overlap joints in the mesh by a minimum of 5cm. Trowel over to give the required finish effect. Re-inforcement for waterproof membranes, felts and similar roofing materials. Distributes stress evenly when used with marble, stone and ceramic tiles. Maintains stability and durability when used with floorcoverings. Weight- 160gsm;Construction - 4x4mm mesh; 1 roll will cover 50m of substrate at a 1m width.

Read more less

A high strength, 100% fibreglass close weave (9 x 9 per sq inch) mesh scrim tape that will not blister or bubble. Has a self-adhesive backing for easy application. Eliminates the need for pre-plastering, provides extra reinforcement and saves time and money. Performs in a wide range of temperatures (5-35oC). Specification: Backing: 100% Fibreglass; Adhesive: Acrylic; Total Thickness: 0.2mm; Total weight: approx. 70 gsm. For joint finishing, crack and hole repair. Suitable for use on drywall and plaster walls and ceilings.

Read more less

A high strength, 100% fibreglass close weave (9 x 9 per sq inch) mesh scrim tape that will not blister or bubble. Has a self-adhesive backing for easy application. Eliminates the need for pre-plastering, provides extra reinforcement and saves time and money. Performs in a wide range of temperatures (5-35oC). Specification: Backing: 100% Fibreglass; Adhesive: Acrylic; Total Thickness: 0.2mm; Total weight: approx. 70 gsm. For joint finishing, crack and hole repair. Suitable for use on drywall and plaster walls and ceilings.

Read more less

Metal Pencil Sharpeners 2pk

Read more less

Permanent Markers, 6pk Black

Read more less

Pull Cap Ballpoint Pens 6pk Blue

Read more less

Soft Grip Assorted Luxury Gel Pen 4pk

Read more less

Glue Sticks 10g 4pk

Read more less