Products

The Faithfull Multi-Tester is more than just a conventional voltage tester. The built-in battery powered sensor allows the multi-tester to perform a number of different functions without the need to dismantle a suspected faulty item or have any contact with live parts. The multi-tester is fully insulated and is supplied complete with full operating instructions and will perform the following tests: continuity, bulbs, fuses, short circuits, cable tracking, mains sockets and microwave oven leakage. SAFETY NOTEAlways read and the instruction supplied with the multi-tester.Never use a multi-tester until you are fully conversant with its use and applications. Never work on live equipment, and if in any doubt, always contact a qualified electrician.Do not use as a screwdriver

Read more less

This Faithfull Mains Tester Screwdriver is fitted with a neon indicator in the clear plastic handle which illuminates when the point of the tester is touched on a live voltage source. This mains tester is suitable for testing AC voltages from 125 to 250 volts against earth. The tip of the tester should be placed on the suspected live source, while finger touch contact is applied to the metal stud on the top of the handle. If the circuit or terminal contact point at the tip of the tester is live, the bulb will then light up as confirmation. Note: ALWAYS test the mains tester on a known live source before use, to determine that its indicator bulb is functioning correctly prior to use. WARNING: The earthing position of the user largely determines whether the tester bulb will illuminate or not. Failure to illuminate therefore does not provide 100% confirmation that no voltage is present.Size: 140 x 2.9mm.

Read more less

Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.Size: Blade length 57mm (2.1/4 in)

Read more less

These Faithfull Heavy-Duty Manhole Keys are designed to lift and remove most standard non-locking manhole covers, drain gully covers and access panels. The robust keys are zinc plated for rust protection and have rectangular T-shaped key ends and large triangular shaped handles that provide a positive grip and allow easy access for gloved hands. Pack Quantity: 22 x Faithfull Manhole Keys Manhole Keys 170mm (6.6in)

Read more less

These Faithfull Heavy-Duty Manhole Keys are designed to lift and remove most standard non-locking manhole covers, drain gully covers and access panels. The robust keys are zinc plated for rust protection and have rectangular T-shaped key ends and large triangular shaped handles that provide a positive grip and allow easy access for gloved hands. Pack Quantity: 22 x Faithfull Manhole Keys Manhole Keys 320mm (12.5in)

Read more less

These Faithfull Heavy-Duty Manhole Keys are designed to lift and remove most standard non-locking manhole covers, drain gully covers and access panels. The robust keys are zinc plated for rust protection and have rectangular T-shaped key ends and large triangular shaped handles that provide a positive grip and allow easy access for gloved hands. Pack Quantity: 22 x Faithfull Manhole Keys Manhole Keys 520mm (20.4in)

Read more less

These Faithfull Manhole Keys are designed to lift light-duty manhole covers, recessed tray-type covers and access panels. The robust keys are zinc plated for rust protection and have bent 10mm diameter O-shaped ends. Large triangular-shaped handles provide a positive grip and allow easy access for gloved hands. Pack Quantity: 2

Read more less

These Faithfull Manhole Keys are designed to lift and remove most standard non-locking manhole covers, drain gully covers and access panels. The T-shaped robust steel keys are powder-coated for rust protection and have D-shaped key ends. The handle features a blade edge for prising open stopcock covers and has a hanging hole. Pack Quantity: 2

Read more less

The Faithfull Manure Drag is a traditional farm tool originally designed for use when raking up manure, but also commonly use for dragging drains, ditches, canals, rivers and ponds to remove weeds and debris. The manure drag has a hardwood shaft with a 4-prong solid socket head. Handle length: 1750mm (69in).

Read more less

The Faithfull Manure Fork is a traditional farm and equestrian fork designed for use when picking up and moving manure. The hardwood shaft is fitted with a solid socket 4-prong head and is lightweight yet hardwearing. A T-handle grip is provided for ease of use when turning and tipping. Handle length: 1200mm (48in).

Read more less

The Faithfull Margin Trowel has a flat rectangular blade that is designed for cementing and finishing around windows and any confined areas. Often used by plasterers when unable to use a larger trowel, these trowels are also known as a window trowels. The trowel has a high quality steel blade and soft-grip handle, providing greater comfort. Size: 125 x 50mm (5 x 2in).

Read more less

The Faithfull Stainless Steel Marking and Measuring Set provides the user with all the basic tools to enable them to measure and mark sheet metal for a precise fit. Made from high-quality stainless steel for durability and accuracy. Widely used by metal workers, machinists and hobbyists. Contents: 1 x Divider 152mm (6in), 1 x Steel Rule 152mm (6in), 1 x Carbide Scribe 152mm (6in), 1 x Automatic Centre Punch and 1 x Square 127mm (5in)

Read more less