Products

The Einhell TTE-VC 1930 SA Wet & Dry Vacuum with power take off socket with an automatic function and delayed switch-off, so it can be used as a power source for a variety of different power tools. Its stainless steel tank has a capacity of 30 litres for both dirt and liquids, with a drain screw for the user-friendly and clean disposal of the vacuumed liquid. A practical blow connector is also provided. The pleated filter is for the vacuuming of fine dust, whilst the foam filter protects the motor against soiling during wet vacuuming. Holders for the cable and accessories enable all parts to be stored away quickly and neatly directly on the cleaner itself. For user-friendly handling and mobility there is a carry-handle, two large wheels and two castors. Supplied with: 1 x 36mm Suction Hose, 1 x 3-Piece Plastic Suction Pipe, 1 x Large Suction Nozzle with Combination Insert for Wet & Dry Vacuuming of Floors, 1 x Pleated Filter, 1 x Foam Filter for Wet Vacuuming and 1 x Crevice Nozzle. Specifications: Input Power: 1,500W.Capacity: Wet/Dry: 30 litre.Max Suction Power: 16 kPa.Weight: 3.27kg.

Read more less

The Einhell TE-VC 2230 SACL Wet and Dry Vacuum Cleaner comes with power take off socket. Complies with dust class L in accordance with EU standards. It filters out dust with OEL values >1 mg/m³ and is suitable for allergy sufferers. A filter cleaning system helps to restore suction power if lost/reduced. There is also a blow connection, ideal for blow-cleaning hard-to-reach areas. Its sturdy, rust-proof 50 litre stainless steel tank has a water drain screw for draining the absorbed water. The tank also features practical accessory holders for clean stowage and operations. Fitted with large wheels and castors for improved mobility. Supplied with: 1 x Stainless Steel Telescopic Tube with Air Regulator, 1 x Heavy-duty Plastic Suction Hose 3m, 1 x Universal Nozzle, 1 x Crevice Nozzle, 1 x Upholstery Nozzle, 1 x HEPA Pleated Filter, 1 x Foam Filter, 1 x Dust Bag and 1 x Synthetic Dust Bag. Specifications: Input Power: 1,600W.Capacity: Wet/Dry: 50 Litre.Suction Hose Diameter x Length: 36mm x 600cm.Max. Suction Power: 230 mbar.Weight: 13.1kg.

Read more less

This Einhell TE-VC 2230 SACL Wet/Dry Vacuum Cleaner conforms to dust class L standard in accordance with European standards. Ideal for the careful cleaning of surfaces not sensitive to water. Unlike normal vacuum cleaning and wiping over, the wet & dry vac provides deep-down and thorough cleaning and is an ideal addition to standard household cleaning appliances when it comes to stubborn and ingrained dirt. Since it filters fine dust, the wet & dry vac is particularly suitable for allergy sufferers. A filter cleaning system restores the suction power. The suction power is infinitely adjustable using the speed controller, and the blow connection is suitable for blow-cleaning hard-to-reach areas. Fitted with an automatic coupler socket (230 V, max. 2,180W) for connecting power tools for DIY work. Making it ideal for cleaning tasks on the site, in the workshed or in the hobby room. Its sturdy rust-proof stainless steel tank has a capacity of 40 litres. To enable the water which has been suctioned up to be drained easily there is a water drain screw. For easy transport there are large wheels, castors and a trolley handle, and a cable winding and a suction tube holder are built into the housing. A practical holder for accessories means the nozzles are always ready to hand and provides for neat storage of the extensive accessories. Supplied with a stainless steel telescopic tube (Ø 36mm) with air regulator, a 3 meter heavy-duty plastic suction hose (Ø 36mm), a large combination, crevice and upholstery nozzle, plus a pleated filter, a foam filter and a synthetic dust bag. Specifications: Input Power: 1,500W.Power Take Off: 1,900W.Suction Power: 225 mbar.Collection Container Volume: 40 litre.Dust Protection Class: L.Suction Hose Length x Ø: 3m x 36mm.Power Cable Length: 6m.Weight: 10.1kg.

Read more less

The Einhell TE-VC 36/25 Li S-Solo Wet/Dry Vacuum Cleaner is an indispensable helper in everyday life, because it cleans all surfaces down to the pores and removes dust and dirt just as effectively as liquids. It has two power modes which can be selected simply by pressing a button. ECO mode extends battery life and is suitable for longer vacuuming sessions. The BOOST mode sucks up even stubborn dirt effortlessly with maximum suction power.The air pressure regulator on the handle allows the suction power of up to 150 mbar to be adjusted to sensitive work areas. The rustproof and sturdy stainless steel container can hold up to 25 litres of dirt and liquids, and the integrated water drainage screw makes emptying the vacuumed liquids child's play. Thanks to wheels, castors and carrying handle, the wet-dry vacuum cleaner can be transported to the place of use without effort.The 2.5 metres long, robust plastic suction hose with a 36 millimetres diameter and the telescopic stainless steel tube, together with the battery power, ensure maximum flexibility. Thanks to the telescopic tube, the vacuum cleaner can be individually adjusted to your own body size and is also suitable for overhead use. Thanks to the accessory holder and the suction tube holder, the vacuum and accessories are not only quickly and neatly stowed away, but are just as quickly ready for use again. Equipped with a combi-nozzle for carpets and smooth floors, an upholstery nozzle for car seats and other upholstered furniture, as well as a crevice nozzle for hard-to-reach corners, the vacuum takes on any hurdle and is used for vacuuming, drying and cleaning work in the house, workshop or garage. Tight niches can be blown out quickly with the blow function to then suck up the dirt. The scope of delivery also includes a foam filter for wet vacuuming, as well as a pleated filter and paper dirt bag for dry vacuuming. Part of the Power X-Change family. Powered by Lithium-ion rechargeable batteries with a battery management system for a long life. Requires 2 x 18V Power X-Change system batteries.Comes as a Bare Unit - No Battery or Charger supplied. Specifications:Max. Suction Power: 150 mbar.Vessel Capacity: 25 litre.Suction Hose Length: 250cm.Suction Hose Diameter 36mm.Sound Pressure Level: 76 dB (A).Weight: 6.75kg.

Read more less

The Einhell TH-HA 2000/1 Hot Air Gun is suitable for DIY enthusiasts on jobs involving the removal of old lacquer and paint, the fitting of plastic tubes, and much more besides. There are two power settings, so the temperature and air rate can be set for particular job requirements. Four nozzles are included for optimum adjustment of the TH-HA 2000/1 hot air gun to the particular task. There is also a paint scraper for expert removal of lacquer and paint residues from surfaces. Built-in overheat protection and the stable base ensure maximum safety, making the hot air gun also suitable for stationary applications. Supplied with: 1 x Colour Rasper, 1 x Fishtail Nozzle, 1 x Reflector Nozzle, 1 x Deflector Nozzle, 1 x Cone Nozzle and 1 x Carry Case. Specifications: Input Power: 2,000W.Airflow: 300-550 L/min.Air Temperature: 350-500°C.Weight: 0.70kg.

Read more less

The Einhell TH-HA 2000/1 Hot Air Gun is suitable for DIY enthusiasts on jobs involving the removal of old lacquer and paint, the fitting of plastic tubes, and much more besides. There are two power settings, so the temperature and air rate can be set for particular job requirements. Four nozzles are included for optimum adjustment of the TH-HA 2000/1 hot air gun to the particular task. There is also a paint scraper for expert removal of lacquer and paint residues from surfaces. Built-in overheat protection and the stable base ensure maximum safety, making the hot air gun also suitable for stationary applications. Supplied with: 1 x Colour Rasper, 1 x Fishtail Nozzle, 1 x Reflector Nozzle, 1 x Deflector Nozzle, 1 x Cone Nozzle and 1 x Carry Case. Specifications: Input Power: 2,000W.Airflow: 300-550 L/min. Air Temperature: 350-500°C.Weight: 0.70kg.

Read more less

The Einhell TP-18V Power X-Change Twin Pack contains: 1 x 18V TP-CI 18 Li BL Power X-Change Impact Driver. Powered by a PurePOWER Brushless motor, comes with 10 years motor warranty after registration. Ideal for effortless tightening of large/long screws. A special impact mechanism protects the wrist from torsional forces. The finely adjustable electronic speed control can be precisely adjusted to your requirements for the material you wish to work on, so neither the material nor the impact driver are overstrained. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-2,900/min.Max. Torque: 180Nm.Weight: 1.07kg. 1 x 18V TP-CD 18/50 Li-i BL Power X-Change Impact Drill. Powered by a PurePOWER Brushless motor, comes with 10 years motor warranty after registration. Delivers power with pinpoint accuracy exactly where it is needed: for drilling in harder materials like stone and brick in restoration and renovation jobs. Bit Holder: 13mm Single Sleeve.Impact Rate: 0-8,000/0-28,800/bpm.Max. Torque: 50Nm.Torque Settings: 20 +1 +1. Weight: 1.19kg. Also supplied with: 2 x 18V 2.0Ah Power X-Change Li-ion Batteries, 1 x Power X-Change Fast Charger and 1 x Tool Bag.

Read more less

The Einhell TP-AG 18/125 CE Q Li-Solo Pro Angle Grinder is a practical tool for grinding, cutting, roughing and polishing. Powered by a powerful brushless motor. Brushless motors are more efficient, more powerful and more durable than brush motors. What's more, no maintenance whatsoever is required with brushless motors. Thanks to its powerful motor, the cordless angle grinder delivers the same power as a corresponding corded device with 900W. It can be flexibly adapted to the respective material and the various applications via speed control. Continuous speed electronics ensure consistent performance without loss of speed, even under high loads.The quick-release nut makes it possible to quickly change the cutting disc without tools. Its additional handle can be mounted in two positions and features softgrip surfaces for comfortable handling. Maximum flexibility is offered by the disc guard with quick adjustment, which can be adapted to the respective working position. An integrated dust screen protects the interior of the device from dirt and, in combination with the intelligent air ducting, increases the service life. For cleaning, the grille can be easily removed. An overload protection prevents overheating damage and soft start and restart protection ensure high safety during work.Part of the Power X-Change family. Powered by Lithium-ion rechargeable batteries with a battery management system for a long life.Comes as a Bare Unit - No Battery or Charger supplied. Supplied without cutting and grinding wheels (sold separately).Specifications:No Load Speed: 3,000-10,500min.Disc Diameter: 125mm.Weight: 1.7kg.

Read more less

The Einhell TP-AP 18/28 Li BL - Solo Brushless Reciprocating Saw offers more power and runs for longer. Its anti-vibration function ensures low vibration while working. A soft grip handle and gripping surfaces make the saw easy and comfortable to handle. An adjustable soleplate enables optimal use of the blade, and tool-less blade changes keep things simple. Part of the Power X-Change series, powered by Lithium-ion rechargeable batteries with a battery management system for a long-life. This reciprocating saw comes as a Bare Unit, NO battery or charger. 2.5Ah batteries or higher are recommended for best results. Supplied with: 1 x KWB Wood Blade. Specifications: Strokes at No Load: 0-2,500/min.Stroke Length: 28mm.Cutting Depth: Wood 200mm, Plastic 20mm, Steel 12mm.Weight: 2.06kg.

Read more less

The Einhell TP-BS 18/457 Li BL - Solo Belt Sander is a practical tool for evenly sanding large areas. Its brushless motor and electronic speed control are ideal for material and usage-oriented work, providing more control and power. There is also a continuous running lock for comfortable working. The handle and additional handle with soft grip provide optimal handling. With tool-free belt adjustment and lock leaver for quick belt change. It also features an integrated storage surface for stationary use. Part of the Power X-Change series, powered by Lithium-ion rechargeable batteries with a battery management system for a long-life. This belt sander comes as a Bare Unit, NO battery or charger. Supplied with: 3 x P80 Sanding Belts, 1 x Dust Box and 1 x Dust Extraction Adaptor. Specifications: Belt Speed: 120-250/min.Belt Size: 75 x 457mm.Sanding Surface: 75 x 126mm.Weight: 2.58kg.

Read more less

The Einhell TP-CC 10 T Professional Table Saw features a sliding table, making it an indispensable tool for any workshop. The smooth-running sliding carriage makes it possible to saw even larger workpieces with precision. Whether you need to trim plywood and panelling, or cut joists and planks to length: the table saw handles any job thanks to 85mm cutting height and its 45° tiltable and height-adjustable blade.The cast aluminium work table features a height-adjustable table insert with fine adjustment. The rip fence can be mounted on either side, with two mounting options on the right side, and can be adjusted precisely by means of a rotary knob. The rip fence also has a foldable system allows it to function as a table extension, but can also be attached right next to the saw blade for very narrow cuts.The solid aluminium angle stop has a 15° guide grid. The angle stop can be mounted on the sliding table and used to push the workpiece at a precise angle. The two-piece blade guard offers the advantages of optimal visibility of the cutting area and safety during operation.If the working area needs to be kept clean, any Einhell wet and dry vacuum cleaner can be connected to provide suction via the extraction adapter. The saw has a soft start function to protect both the motor and the fuses. The sturdy steel frame construction with rubberized feet ensures secure positioning of the table saw with low vibration, while multiple transport handles, a cable winder and brackets for all attachments and accessories facilitate transport.Specifications:Input Power: 2,000W.No Load Speed: 4,200/min.Saw Blade: 254 x 30mm Bore.Swivelling Range of Saw Blade: 45°.Max. Cutting Height: @45° 55mm, @90° 85mm.Height Adjustment: 0-85mm.Diameter of Suction Adaptor: 36mm.Working Table: 585 x 630mm.Table Broadening Right 585 x 50mm.Weight: 20.79kg.

Read more less

The Einhell TP-CD 18 Li-i BL Power X-Change Combi Drill is powered by an Einhell PurePOWER brushless motor. This brushless motor offers more power and a longer running time than conventional carbon brush motors. Once you register online, the brushless motor has a 10-year warranty.It has 2-speed gearing for powerful driving and fast drilling. The hammer function is a big help when you are working with tough materials. The impact mechanism provides enough force to drill through stone and concrete. Hammer drilling exerts enormous force on the user. The secondary handle relieves stress on the joints. The ergonomic design with Softgrip makes the tool comfortable to work with. There is also an LED light for improved visibility. Part of the Power X-Change family. Powered by Lithium-ion rechargeable batteries with a battery management system for a long life.Supplied with: 2 x 18V 2.0Ah Power X-Change Li-ion Batteries, 1 x Charger and 1 x Carry Case.Specifications:Drill Chuck: 13mmImpact Rate: 8,000, 28,800/min.Max. Torque: 60NmTorque Settings: 22Weight: 1.69kg

Read more less