Products
Draper Draper Bandsaw Stand for Stock No. 98468
This bandsaw stand is designed for use with Stock No. 98468 - 245mm Bandsaw (420W) and would be suitable as a stand for many other similar machines. Manufactured from sheet steel. Supplied with fixings for assembly and fixing to the saw.Stand height: 625mmWorking table height: 990mm
£0.00
-
Draper Draper Bandsaw Stand for Stock No. 98468
This bandsaw stand is designed for use with Stock No. 98468 - 245mm Bandsaw (420W) and would be suitable as a stand for many other similar machines. Manufactured from sheet steel. Supplied with fixings for assembly and fixing to the saw.Stand height: 625mmWorking table height: 990mm
£0.00
-
Draper Draper Bandsaw with Steel Table, 200mm, 250W 82756
Supplied with a 5mm wide 6tpi blade, parallel rip fence, open ended spanner, flat head screwdriver, push stick and 2 x hex keys. Each machine is fitted with a table tilting feature with 0 - 45° capacity allowing angled cutting, ripping, mitre and bevel cutting. Fitted with a cable and approved plug. Display carton.SpecificationsMotor input 250WMotor type InductionTable size 290 x 290mmMax cutting height 80mmBlade speed 900M/minMax width of cut 200mmBlade length 1400mmTable bevel angle 0-45 degTable height from floor 300mmDust extraction port 35mmWeight 17.5kg
£0.00
-
Draper Draper Bandsaw, 228mm, 300W 98446
Bench mounted bandsaw built to a high specification and ideal for trade professionals. Designed to cut wood, wood derived materials and plastics. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. Supplied with 10tpi blade, parallel rip fence and other accessories.Contents1 x 10tpi blade 1 x Parallel rip fence1 x Open ended spanner1 x Push stick1 x Hex keySpecificationsVoltage: 230VFrequency: 50HzInput: 300WNo load speed: 1400rpmMaximum throat capacity: 228mmCutting depth: 90mm Maximum capacity: 125mmCutting speed: 10.6m/sec (635m/min)Table size: 300 x 300mm (Tilt to 45 degrees)Bandsaw dimensions: 510 x 370 x 755mmWeight: 19kg
£0.00
-
Draper Draper Bandsaw, 305mm, 750W 84714
This two-speed bandsaw is designed to cut wood, wood-derived materials and plastics. Built to a high specification and ideal for trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately (Stock No. 84718).Contents1 x 4tpi blade 1 x Parallel rip fence1 x Open ended spanner1 x Push stick4 x Hex keys4 x Pan head screw, M7 x 12mm 4 x Washers, 8.5mm4 x Plastic wing boltsSpecificationsVoltage: 230VFrequency: 50HzInput: 750WNo load speed: 1400rpmMaximum throat capacity: 305mmCutting depth: 165mm Maximum capacity: 172mmCutting speed: 2 speed, 6.16m/sec (370m/min) and 13.33m/sec (800m/min)Table size: 390 x 480mm (Tilt to 45 degrees)Bandsaw dimensions: 750 x 520 x 1170mmWeight: 57kg
£0.00
-
Draper Draper Bandsaw, 340mm, 1100W 84715
This two-speed bandsaw is designed to cut wood, wood-derived materials and plastics. Built to a high specification and ideal for trade professionals. This is reflected in the quality of the structure and strength of the worktable support and tilt mechanism, as well as the structure and strength of the blade wheel adjusting mechanism. The adjustable blade tensioning and tracking allows for precise cutting. There is a high spec mitre guide for crosscut work. The strong table tilts with a 0-45 degree range allowing angled cutting, ripping and mitre and bevel cutting. No-volt release switch prevents uncontrolled blade to re-start after power interruption. There is a tool drawer built into the base unit providing convenient storage while working. Supplied with 4tpi blade, parallel rip fence and other accessories. This bandsaw can be floor standing or mounted on a stand available separately (Stock No. 99270).SpecificationsVoltage: 230VFrequency: 50HzInput: 1100WNo load speed: 1400rpmMaximum throat capacity: 340mmCutting depth: 225mm Maximum capacity: 205mmCutting speed: 2 speed, 6.16m/sec (370m/min) and 13.33m/sec (800m/min)Table size: 545 x 515mm (Tilt to 45 degrees)Bandsaw dimensions: 850 x 650 x 1297mmWeight: 74kg
£0.00
-
Draper Draper Bar Type Tap Wrench, 2.50 - 12.00mm 37329
Hardened and tempered jaws, knurled handle with black enamelled finish. Display packed.
£0.00
-
Draper Draper Bar Type Tap Wrench, 4.25 - 14.40mm 37330
Hardened and tempered jaws, knurled handle with black enamelled finish. Display packed.
£0.00
-
Draper Draper Bar Type Tap Wrench, 4.25 - 17.70mm 37331
Hardened and tempered jaws, knurled handle with black enamelled finish. Display packed.
£0.00
-
Draper Draper Bar Type Tap Wrench, 6.80 - 23.25mm 37332
Hardened and tempered jaws, knurled handle with black enamelled finish. Display packed.
£0.00
-
Draper Draper Barbecue Cover, 1500 x 1000 x 1250mm 76228
Heavy duty polyethylene with steel plated eyelets. Polybag with header.
£0.00
-
Draper Draper Barbecue Cover, 900 x 600 x 900mm 76222
Heavy duty polyethylene with steel plated eyelets. Polybag with header.
£0.00
