New products
Hultafors Hultafors Talmeter Marking Measure 3m (Width 16mm)
This Hultafors Talmeter Marking Measure has a white, impact resistant steel tape graduated in millimetres using inkjet technology. Combined marking and measurement edges mean you can quickly and simply measure and mark both internal and external lengths. Its also features a caliper function which can be used to mark out round shapes. Tough, ABS plastic case with extender, easy to extend and retract using the grip-friendly sliding carriage. Both the tape and extender can be replaced if needed. Accuracy: EC Class II.This Hulfafors Talmeter Marking Measure Tape has the following specification: Length: 3m Width: 16mm
£15.99
-
Hultafors Hultafors STL 600 Stainless Steel Ruler 600mm
The Hultafors STL Ruler is made from tempered stainless steel for extra durability. The surface is matt chrome-plated for anti-glare and more accurate reading. Graduated in millimetres along the upper edge, half-millimetres along the lower edge and with decimetre figures in red. The reverse side is blank. Specification: Tolerance: ±0.3 mm/m.The Hultafors STL 600 Stainless Steel Ruler has the following specification: Length: 600mmWidth: 28.5mmThickness: 1.2mm
£21.49
-
Hultafors Hultafors STL 1000 Stainless Steel Ruler 1000mm
The Hultafors STL Ruler is made from tempered stainless steel for extra durability. The surface is matt chrome-plated for anti-glare and more accurate reading. Graduated in millimetres along the upper edge, half-millimetres along the lower edge and with decimetre figures in red. The reverse side is blank. Specification: Tolerance: ±0.3 mm/m.The Hultafors STL 1000 Stainless Steel Ruler has the following specification: Length: 1000mm (39 in)Width: 35mmThickness: 1.5mm
£41.49
-
Hultafors Hultafors SM 120 Aluminium DIY Spirit Level 2 Vial 120cm
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 1200mm (47in)
£33.99
-
Hultafors Hultafors SM 180 Aluminium DIY Spirit Level 3 Vial 180cm
DIY aluminium sprit level with unbreakable, highly transparent and durable block vials with a sensitivity of 10 mm/m and a tolerance of ± 0.75 mm/m in normal position (inverted 1.0 mm/m). The low viscosity vial fluid is a coloured oil mixture giving the bubble the best possible conditions for movement. Resistant to UV light and temperature fluctuations. The bubble is not affected by static electricity as the fluid is anti-static.Length 1800mm (71in)
£46.49
-
Hultafors Hultafors FT30ME Futura Fibreglass Tape 30m/100ft (Width 13mm)
The Hultafors Futura Fibreglass Long Tape has an ergonomic closed case design, featuring an integral hand grip which allows fingers to be kept clear of the winding lever when rewinding. A highly flexible fibreglass blade with an additional PVC overcoating, offers superior resistance to scuffing and marking. There is an easy winding, high-impact polymer centre and an ABS belt clip moulded on to the rear of the case. Fitted with a corrosion resistant end-piece. Made in Britain.The Hultafors FT30ME Futura Fibreglass Tape has both metric and imperial measurements. Specification: Blade Length: 30m/100ftBlade Width: 13mmAccuracy: EC Class II
£33.99
-
Hultafors Hultafors FT10/79 Futura Fibreglass Long Tape 10m/33ft (Width 13mm)
The Hultafors Futura Fibreglass Long Tape has an ergonomic closed case design, featuring an integral hand grip which allows fingers to be kept clear of the winding lever when rewinding. A highly flexible fibreglass blade with an additional PVC overcoating, offers superior resistance to scuffing and marking. There is an easy winding, high-impact polymer centre and an ABS belt clip moulded on to the rear of the case. Fitted with a corrosion resistant end-piece. Made in Britain.This Hultafors FT10/79 Futura Fibreglass Long Tape has both metric and imperial measurements. Specification: Blade Length: 10m/33ftBlade Width: 13mmAccuracy: EC Class II
£25.99
-
IRWIN® Vise-Grip® Irwin® Vise-Grip® TVG73 Locking Pliers Set, 3 Piece
The IRWIN® Vise-Grip® 3 piece set comprises of: 2 x Curved Jaw Locking Pliers, ideal for a variety of applications and material shapes. They are made from high-grade heat-treated alloy steel for maximum toughness and durability. The hardened teeth are designed to grip from any angle. The pliers classic trigger release provides maximum locking force. The hex key adjusting screw tightens to adjust pressure and draw materials together and also provides a controlled release. 10WR: Length: 254mm (10in), Capacity: 48mm.5WR: Length: 127mm (5in), Capacity: 29mm. 1 x Locking Long Nose Pliers, they have a powerful locking action. The jaws are long enough to reach into tight spots, whilst the tips are small enough to grip tiny objects. The pliers also incorporate a wire cutter. 6LNC: Length: 150mm (6in), Capacity: 51mm.
£62.49
-
IRWIN® Record® Irwin® Record® V175B Woodcraft Vice 175mm (7in) Boxed
Record Irwin V175B Woodcraft Vice is designed for the user who requires a more robust vice which is permanently fixed. The main screw has a rolled 2-start acme thread which ensures a smooth strong action with the integral nut in the vice body. A top quality vice at an economical price.Boxed. Jaw Width: 175mm (7in).Jaw opening: 165mm (6.1/2in).
£43.49
-
IRWIN® Record® Irwin® Record® V150B Woodcraft Vice 150mm (6in)
IRWIN® Record® V150B Woodcraft Vice is lighter in construction than the standard woodworking vices. This useful portable vice can be attached to most working surfaces by means of a 2.1/4in capacity integral clamp. Provision is also made for the body to be screwed permanently to the bench if required. High-quality cast body fitted with carefully aligned steel slide bars and main screw. Specification Jaw Width: 150mm (6in).Jaw Opening: 115mm (4.1/2in).
£39.49
-
IRWIN® Record® Irwin® Record® M130 Clamp Heads
IRWIN Record 130N clamp heads. A bar clamp of any length can be easily made using a piece of timber 1in thick. Cast iron head and slides incorporating large thrust surfaces. High-quality steel handle and screw with pin attached by welded chain.
£28.49
-
IRWIN® Record® Irwin® Record® L136/6 Lengthening T-Bar 1200mm (48in)
The IRWIN Record L136/6 Lengthening T-Bar is used for increasing the length of Record 136. T-Bar Clamps. Will increase the capacity of any 136 T-Bar Clamp by 1200mm (48in). Length: 1,200mm (48in).
£68.49
