New products
Trend Trend 3/75 x 1/2 TCT Two Flute Lockjig Cutter 12.0 x 63mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/75 x 1/2 TCT Two Flute Lockjig Cutter has the following specification: D: 12mm (15/32in)C: 63mmOL: 114mmShank Diameter: 1/2in
£56.99
-
Trend Trend 4/1 x 1/2 TCT Two Flute Cutter 15.0 x 25mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 4/1 x 1/2 TCT Two Flute Cutter has the following specification: D: 15mm (19/32in)C: 25mmOL: 67mmShank Diameter: 1/2in
£59.99
-
Trend Trend 3/81 x 1/2 TCT Two Flute Cutter 12.7 x 32mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/81 x 1/2 TCT Two Flute Cutter has the following specification: D: 12.7mm (1/2in)C: 32mmOL: 74mmShank Diameter: 1/2in
£34.99
-
Trend Trend 3/4 x 1/4 TCT Two Flute Cutter 8.0 x 19mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/4 x 1/4 TCT Two Flute Cutter has the following specification: D: 8mm (5/16in)C: 19mmOL: 52mmShank Diameter: 1/4in
£34.49
-
Trend Trend 3/22 x 1/2 TCT Two Flute Cutter 6.3 x 25mm
The Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/22 x 1/2 TCT Two Flute Cutter has the following specification: D: 6.3mm (1/4in)C: 25mmOL: 70mmShank Diameter: 1/2in
£47.99
-
Trend Trend 3/22 x 1/4 TCT Two Flute Cutter 6.3 x 25mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/22 x 1/4 TCT Two Flute Cutter has the following specification: D: 6.3mm (1/4in)C: 25mmOL: 56mmShank Diameter: 1/4in
£33.49
-
Trend Trend 337 x 1/2 TCT Tongue & Groove Set 6.35mm x 10.0mm
This Trend 337 x 1/2 tc is a one-piece tongue and groove set. The parts are inter-changed on the Arbor to alter the set up. It has a maximum timber thickness 22 mm and Minimum timber thickness 15 mm. Instructions for use are supplied. TCT. 1/2in Shank. D: 41 mm.C: 6.35 mm.C2: 10 mm.E: 22 mm.OL: 76 mm.
£106.49
-
Trend Trend 3/8 x 1/4 TCT Two Flute Cutter 12.0 x 19mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/8 x 1/4 TCT Two Flute Cutter has the following specification: D: 12mm (15/32in)C: 19mmOL: 51mmShank Diameter: 1/4in
£37.99
-
Trend Trend 3/21 x 1/4 HSS Two Flute Cutter 6.3 x 28mm
Trend HSS Two Flute Straight Cutters are made from a single piece of High Speed Steel, ground with a very fine edge. Generally HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Suitable for non abrasive materials, but will give a superior finish in soft timbers. Specification D: 6.3mm (1/4in)C: 28mmOL: 59mmShank Diameter: 1/4in
£19.49
-
Trend Trend 3/2 x 1/4 TCT Two Flute Cutter 6.0 x 16mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/2 x 1/4 TCT Two Flute Cutter produce a cleaner finish than the single flute cutters. This cutter is suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges.Corners will require a final trimming square with a hand chisel or a corner chisel. The Trend Two Flute Cutter is suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Specifications: Cut Diameter: 6.0mm (15/64in).Cut Depth: 16mm.Overall Length: 48mm.Shank Diameter: 1/4in.
£34.99
-
Trend Trend 3/20 x 1/4 TCT Two Flute Cutter 6.3 x 16mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/20 x 1/4 TCT Two Flute Cutter has the following specification: D: 6.3mm (1/4in)C: 16mmOL: 47mmShank Diameter: 1/4in
£29.99
-
Trend Trend 3/1 x 1/4 TCT Two Flute Cutter 5.0 x 16mm
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.This Trend 3/1 x 1/4 TCT Two Flute Cutter has the following specification: D: 5mm (13/64in)C: 16mmOL: 56mmShank Diameter: 1/4in
£32.49
