New products

The Stanley Moulded Body Surform® Block Plane for use on all types of wood, aluminium, copper, plastics and laminates. The blade is reversible for bull nose work, and it has a lightweight plastic moulded body with a thumb screw for quick release. Fitted with a 140mm (5.1/2in) fine cut blade. The blade can be changed without the use of additional tools. Overall Length: 155mm (6in).

Read more less

Quality chrome vanadium steel, increased strength and durability for all metalwork tasks from chipping and shaping wrought iron, cast iron, steel, brass, bronze, copper and aluminium to cutting bolts, nuts and rivets. Quenched and tempered to precise specifications for added safety.Size: 300 x 25mm (12 x 1in).

Read more less

This Stanley Combination Square has a precision die cast body with 3 precision machined faces for accuracy. It can be used as a try and mitre square, depth and height gauge and spirit level and it has a 360-degree vial for all round visibility. The steel blade is etched with metric and imperial graduations, and coated for high visibility and is rust resistant. It has a high-quality brass nut and scriber fittings for long life. Specification: Size: 300mm.

Read more less

The Stanley FatMax® Screwdriver sets have a chrome vanadium steel bar allows high torque and reduces the risk of tip breakage and the handle is moulded directly to shaft for a virtually unbreakable bond - gives long life and durability. The soft grip handle gives a perfect combination of great grip and reduced fatigue in use and is colour coded for easy identification of the right tip type for the application. The smooth domed end offers fast, comfortable spinning action and the large diameter handle offers higher torque when driving wood screws. Contents: Parallel: 3.0 x 50mm, 4.0 x 100mm, 6.5 x 30mm (stubby).Flared: 5.5 x 100mm, 6.5 x 150mm, 8.0 x 150mm.Pozidriv: PZ0 x 75mm, PZ1 x 100mm, PZ2 x 125mm.

Read more less

The Stanley DYNAGRIP™ Wood Chisel is fitted with a steel striking cap handle which can be used with a steel hammer. with a longer, soft grip handle for improved grip and control, forged high carbon steel blades for reassurance of strength and durability. The pre-sharpened blade is ready for immediate use.Set of 5 Stanley DYNAGRIP™ Bevel Edge Chisels, contains the following: 1 x DYNAGRIP™ Bevel Edge Chisel 6mm (1/4in)1 x DYNAGRIP™ Bevel Edge Chisel 12mm (1/2in)1 x DYNAGRIP™ Bevel Edge Chisel 18mm (11/16in)1 x DYNAGRIP™ Bevel Edge Chisel 25mm (1in)1 x DYNAGRIP™ Bevel Edge Chisel 32mm (1.1/4in)

Read more less

The Stanely SteelMaster™ Claw Hammer has a heat-treated and polished carbon steel head for strength, durability and safety. A seamless, oval tubular steel shaft provides strength and balance and the vinyl soft-grip ergonomic handle gives comfort and grip in use.1 x Stanley ST1 SteelMaster™ Claw Hammer 567g (20oz)

Read more less

A 6-piece pin punch set made from quality chrome vanadium steel gives increased strength and durability, for retained accuracy when marking out centre lines, hole locations and pilot drill starting points. Quenched and tempered to precise specifications. Contains the following sizes: 1.5, 3, 4, 5, 6, and 8mm (1/16, 1/8, 5/32, 3/16, 1/4, 5/16in).

Read more less

The Stanley Jet Cut heavy-duty saws have Bi-material handles which are screwed and ultrasonically welded for comfort and security, and allow cutting at 90° and 45°. The teeth are precision set to generate clearance of kerf for the blade to cut on both the forward and back stroke, increasing cutting efficiency by 30%. These 3 sided teeth are precision ground to offer razor sharp cutting edges at every stage of the stroke. They are induction hardened to stay sharper for longer. 7 TPI.Length: 550mm (22 in).

Read more less

These Stanley Pozidriv Insert Bits are precision machined for the perfect fit, forged for added tip strength and ground for long- life and durability. Suitable for use in industrial, construction and DIY applications, and will fit most of today's power tools, bit holders and hex screwdrivers.Size: No. 2 Pozidriv.Length: 100 mm x 1/4-inch hex.Box of 10.

Read more less

This toolbox combines metal walls with a protective plastic base and edges. The top has a V-groove to hold timber or pipes in place for cutting. It also has a fold flat, soft grip handle. Heavy-duty metal catches provide secure locking.This Stanley Metal and Plastic Toolbox 51cm (20in) combines metal walls with a protective plastic base and edges. The top has a V-groove to hold timber or pipes in place for cutting. It also has a fold flat, soft grip handle and heavy-duty metal catches provide secure locking. Specifications: Size: 497 x 293 x 295mm.

Read more less

The STANLEY® SORTMASTER™ Organiser is ideal for storing a variety of items from hammers, angled tools or tape measures to small parts and accessories. Its unique corners have been designed to accommodate for angled tools such as hammers. Made from durable plastic, the see-through lid provides easy location of desired items. Side clips allow multiple units to be stacked together. Removable dividers can be re-arranged, depending on requirements. Easy to customise to your needs, with 1,024 possible configurations. The lid structure prevents movement of small parts from one compartment to another. Specification: Dimensions (L x W x H): 430 x 90 x 330mm1 x STANLEY® SORTMASTER™ Organiser

Read more less

These Stanley FatMax® VDE pliers are manufactured to exacting European standards and individually tested to 10,000 volts and approved for working around live circuits that do not exceed 1,000 volts. The bi-material handles offer the user improved control and grip, incorporating slip guard shoulders for additional safety. They are made from a heat treated, high chrome steel forging for long life and have hand ground, induction hardened blades. DIN /ASO/ANSI compliant. This 4 piece set contains the following:1 x 165mm Combination Pliers.1 x 175mm Diagonal Cutting Pliers.1 x 160mm Half Round Nose Pliers.1 x 170mm Wire Stripping Pliers.

Read more less