New products
ForgeFix Forgefix Wing Nut ZP M12 Bag 10
These Forgefix Wing Nuts are a convenient alternative to the standard Hex Nut, and allow hand tightening rather than having to use spanners or other tools. The nuts are bright zinc plated for increased corrosion resistance. Also known as a 'Thumbscrew', the wing nut has two large metal 'wings' for easy tightening and loosening. APPLICATION:Where ever a hand tightened fastening is required. Used where frequent adjustments are needed or part removal can be made quickly at some later stage.Can be used with all threaded bolt products. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Wing Nut ZP M12 Bag 10
£1.99
-
ForgeFix Forgefix Flat Washer Form B ZP M3 Bag 100
These Forgefix Form B Flat Washers are Zinc Plated for increased resistance to corrosion. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Washer Heavy-Duty ZP M3 Bag 100
£0.99
-
ForgeFix Forgefix Plasterboard Spring Toggle M5 x 100mm Bag 10
These Forgefix Plasterboard Spring toggles have an all-metal constuction, making them ideal for applications where heat resistance is required. Their wide span wings spread load, ensuring an increased holding capacity. They have excellent holding in lathe and plaster applications.The toggles are quick and easy to use, with no requirement for specialist tools. APPLICATION:Light to medium-duty fixing for all manner of fixtures including bathroom accessories, shelving, lighting, radiators and much, much more.Plasterboard Spring Toggle M5 x 100 Bag 10
£2.49
-
ForgeFix Forgefix Through Bolt ZYP M8 x 75mm Bag 10
These Forgefix Through Bolts (also known as Wedge Anchors or Toothless Anchors) have a Zinc Yellow Passivated finish for durability and corrosion resistance. They are through-fixing, and extremely economical and quick to install. APPLICATIONIdeal for fixing brackets, cladding, restraints, racking, fabricated stairwells and industrial doors.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.These Through Bolts have the following specification: Size: M8 x 75mmDrill Size: 8mmMax. Thickness: 25mmMin Hole Depth: 40mmQty: 10
£2.99
-
Faithfull Faithfull Wire Brush Shaft Mounted 50mm x 20mm, 0.30mm Wire
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type: Cup Maximum speed: 12,000/min.The FAIWBSI50 Wire Brsh has the following specifications: Face diameter: 50 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.
£4.49
-
Faithfull Faithfull Wire Cup Brush Twist Knot 100mm M14x2, 0.50mm Steel Wire
Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industrial use and more specialist applications.Face Diameter: 100mm Thread: M14 x 2 Wire: 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2Maximum rpm 8500
£16.49
-
Faithfull Faithfull Wire Brush Shaft Mounted 70mm x 25mm, 0.30mm Wire
This Faithfull Wire Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. It can be used in industrial power tools at higher speeds. Type: Cup Maximum speed: 12,000/min.Face diameter: 70 mm x 25 mm Shaft: 6 mm (1/4in) Wire: 0.3 mm Stainless steel Conforms to ISO 9001. and DIN EN1083-1 and 2
£8.99
-
Faithfull Faithfull Wire Cup Brush Twist Knot 65mm M10x1.5, 0.50mm Steel Wire
Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industrial use and more specialist applications.Face Diameter: 65mm Thread: M10 x 1.5 Wire: 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 12,500.
£7.99
-
Faithfull Faithfull Wire Cup Brush Twist Knot 65mm M10x1.25, 0.50mm Steel Wire
Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industrial use and more specialist applications.Face Diameter: 65mm Thread: M10 x 1.25 Wire: 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 12,500.
£7.99
-
Faithfull Faithfull Wire Cup Brush Twist Knot 80mm M14x2, 0.50mm Steel Wire
Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industrial use and more specialist applications.Face Diameter:80mm Thread: M14 x 2 Wire: 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2Maximum rpm 8500
£13.49
-
Faithfull Faithfull Wire Cup Brush Twist Knot 65mm M14x2, 0.50mm Steel Wire
Faithfull Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industrial use and more specialist applications.Face Diameter: 65mm Thread: M14 x 2 Wire: 0.5mm Conforms to ISO 9001 and DIN EN1083-1 and 2 Maximum rpm 12,500.
£7.99
-
Faithfull Faithfull Conical Wire Brush 100mm M10x1.5 Bore, 0.50mm Wire
Faithfull Conical Knot Brush with high tensile steel wire. Ideal for work in hard-to-reach places such as edges or corners. Suitable for the removal of slag, rust, scale or even dried cement. Max. Cutting Speed: 12,500 rpm.Type: Knot conical Diameter: 100 mm Thread: M10 x 1.5 Wire: 0.5 mm twist knot steel Conforms to ISO 9001. and DIN EN1083-1 and 2
£7.99
