New products

The Faithfull Straight Gouge Carving Chisel comes with wooden handle, deep seated tang, brass ferrule and fully polished blade. Gouges are designed with a concave blade to remove wood without causing splintering. The depth of the curve or sweep determines the depth-of-cut. This product is made with FSC® 100% Certified Wood from well-managed forests.Please Note: Woodcarving chisels will require final sharpening prior to their first use.1 x Faithfull FSC Straight Gouge Carving Chisel 9.5mm (3/8in).

Read more less

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max. Load: 2 Tonne.Width: 60mm.Length: 3m.

Read more less

Faithfull Workbench Vice, ideal for the home handyman and the more serious woodworker. Manufactured from high quality grey iron castings that are machined to close tolerances to ensure a smoothly operating sliding jaw. The main screws Acme thread provides a rapid jaw action and features a toe in function to ensure an even pressure is applied when a work piece is clamped. Wooden jaws may also be fitted to protect the work piece and the vice. The vice is finished in an attractive blue enamel coating with a chrome plated main screw and handle to provide better corrosion resistance.The Faithfull VW150B Workbench Vice has the following specification: Jaw Width: 175mm (7in)Clamping Capacity: 185mm (7.1/4in)Throat Depth: 65mm (2.1/2in)Tommy Bar Length: 150mm (6in)Weight: 3.157Kg (7lbs)

Read more less

The Faithfull Trade Tape Measure is a high quality measure that is perfect for tradesmen, thanks to its long stand out and tough impact resistant ABS casing. It features a class II blade that is Nylon coated to protect agaisnt abrasions and corrosion. The blade width of 25mm provides a long standout of 2.3m, allowing easy, single person measuring from a distance. The casing is fitted with a bottom blade bump, protecting the blade as it’s returned to the case. The tip of the blade is fitted with a triple riveted end hook. Soft-grip TPR coating provides additional comfort, and a handy side clip allows quick attachment to any tool belt. Available with metric only or metric and imperial graduations. Accuracy: Class IISpecification: Blade Length: 8m / 26ftBlade Width: 25mmGraduations: Metric and Imperial

Read more less

Faithfull Tri-Point Speed Auger Bits will drill fast and clean holes in all types of wood. The three spurs and cutting edges create perfectly round holes with less chance of binding in the workpiece. Three flutes offer efficient waste removal making them much faster than traditional bits. A self-feeding screw tip enables accurate centring and pulls the bit through the wood. Precision machined from high quality carbon steel with ground and honed cutting edges. The quick release 1/4in hex shank is impact rated for use in impact drivers as well as all other corded and cordless drills. These stubby drill bits are 102mm (4in) long making them ideal for drilling through joists or in enclosed areas.1 x Faithfull Tri-Point Speed Auger Bit 25mm Stubby.

Read more less

This Faithfull Woodworking Vice is manufactured from close grain grey cast iron with a steel mainscrew for a long and trouble-free working life. The accurately machined housing coupled with solid steel guide rods assure a smooth sliding true parallel action for the jaw, free from side or cross deflection.A quick-release lever allows the user to open the vice jaws to the required width without the need to wind the main screw handle, allowing much faster adjustment.This vice has a toe-in feature so that when fully closed the jaws only meet at the top to provide even clamping on the whole depth of the workpiece. Wooden jaws may also be fitted to protect the workpiece and the vice. The adjustable front stop or dog gives an additional clamping facility when used in conjunction with a bench stop. FAIVW175DQ: Opening: 200mm (8in).FAIVW230DQ: Opening: 330mm (13in).This Faithfull Woodwork Vice Quick-Release with Dog has the following specification: Jaw Width: 230mm (9in).Opening: 330mm (13in).

Read more less

Faithfull bungee cords make tying items down or in bundles easy. They are ideal for use in the home, workshop, garage, car, trailer and caravan. They are up to 3 times stronger than standard bungee cords, with super-strong steel hooks and a smooth nylon coating to prevent scratching.The bungee cords are made from heavy-duty polypropylene braid with high-grade rubber cord for maximum elasticity. Tested to EK5/AK8 11-01.1:2011.The Faithfull Bungee Cords make tying items down or in bundles easy. They can be used in the home, workshop, garage, car, trailer and caravan. Up to 3 times stronger than standard bungee cords, these flat bungee cords feature super-strong steel hooks with a smooth nylon coating to prevent scratching. The heavy-duty polypropylene braid has a high-grade rubber cord for maximum elasticity. Tested to EK5/AK8 11-01.1:2011 Contains: 2 x 46cm (18in), 2 x 60cm (24in), 2 x 76cm (30in) and 2 x 90cm (36in).

Read more less

The Faithfull HSS taper drills are used for drilling sheet materials. They will drill a hole of any diameter between the stated sizes. Please note that use of a cutting fluid is advisable with this drill.The Faithfull FAITD630 taper drill is made from high speed steel (HSS) and has the following specifications:Drill sizes: 6 to 30mmMax thickness: 2mm

Read more less

Faithfull bungee cords make tying items down or in bundles easy. They are ideal for use in the home, workshop, garage, car, trailer and caravan. They are up to 3 times stronger than standard bungee cords, with super-strong steel hooks and a smooth nylon coating to prevent scratching.The bungee cords are made from heavy-duty polypropylene braid with high-grade rubber cord for maximum elasticity. Tested to EK5/AK8 11-01.1:2011.The Faithfull Flat Bungee Cords have the following specifications: Length: 46cm (18in). Colour: Blue. Quantity: 2 Piece.

Read more less

Spectre™ by Forgefix, incorporates a long list of advanced screw features, often only found in premium screws, into what we've named advanced multi-purpose wood screws. They feature a countersunk, pozidrive compatible, recessed head. Fully threaded, up to 50mm, with a sawtooth thread, to prevent splitting, and reamer to prevent jacking (50mm and above). They are also surface hardened with a quick start type 17 slash point. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. Zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes, but with the addition of a yellow dye. It offers an aesthetically pleasing finish. CE approved for use in load-bearing timber construction.Specification: Size: 6.0 x 90mmThread: 54mm lengthPack Quantity: Box of 100

Read more less

The ForgeFix Spectre™ S2 Pozidriv Compatible Bits with a 1/4in Hex shank are made from S2 heat-treated, hardened steel for exceptional high-strength and durability. Shock and wear proof. Precision machined tips for reduced cam-out and screw head damage. Finish: S2 grade steel.1 x Box of 10 ForgeFix Spectre™ S2 Pozidriv Compatible Bits PZ2 x 25mm

Read more less

These Forgefix Pozidriv Self-Tapping Screws have countersunk heads and are Zinc Plated for increased resistance to corrosion. They tap their own thread in to a pre-drilled pilot hole in sheet or solid material. They are single threaded to resist pull-out. APPLICATION:Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Self Tapping Screw Pozi Countersunk ZP 1.1/4 x 8 Box 200

Read more less