New products

These Faithfull brushes have nylon bristles for use on wood, metal and stone. They have many times the life of a wire brush. Conform to ISO 9001 and DIN EN1083-1 and 2. The 6mm shank enables them to be used with a power tool with a maximum of 4500rpm.The Faithfull FAIWBN100C Nylon Wheels have a flat circular shape with the following dimensions:Size: 100mm diameter x 6mm shaft x 1.5mm bristle.

Read more less

Faithfull Tri-Point Speed Auger Bits will drill fast and clean holes in all types of wood. The three spurs and cutting edges create perfectly round holes with less chance of binding in the workpiece. Three flutes offer efficient waste removal making them much faster than traditional bits. A self-feeding screw tip enables accurate centring and pulls the bit through the wood. Precision machined from high-quality carbon steel with ground and honed cutting edges. The quick-release 1/4in hex shank is impact rated for use in impact drivers as well as all other corded and cordless drills. Specification: Overall Length: 159mm1 x Faithfull Tri-Point Speed Auger Bit 16mm

Read more less

These Faithfull Woodcarving Chisels have wooden handles, deep seated tangs, steel ferrules and fully polished blades. Gouges are designed with a concave blade to remove wood without causing splintering. The depth of the curve or sweep determines the depth-of-cut. Please Note: Woodcarving Chisels will require final sharpening prior to their first use.The FAIWCARV3F Woodcarving Chisel has the following specifications:Type: Straight gouge.Blade Width: 15.9 mm (5/8 inch). This product is made with FSC® 100% Certified Wood from well-managed forests.

Read more less

The Faithfull Fast Rewind Open Long Tape features a 13mm wide Class III blade that is clearly marked in both imperial and metric measurements. The fibreglass tape is resistant to stretching, scuffs, is impervious to moisture and has a metal end hook. Its large measurement increments are clear and easy to read in almost all weather conditions. The tape is easy to wipe clean after use. The tough ABS open frame case has a fold away rewind handle, a sturdy hand grip and an integral ground spike, making it ideal for single person use. Its superfast geared rewind system has a 4:1 ratio which allows the tape to be rewound back into the case at an extreme rate.This Faithfull Fast Rewind Open Long Tape has the following specifications: Blade Length: 50m/165ftWidth: 13mmAccuracy: EC Class III

Read more less

The Faithfull HSS taper drills are used for drilling sheet materials. They will drill a hole of any diameter between the stated sizes. Please note that use of a cutting fluid is advisable with this drill.The Faithfull FAITDSET3 taper drill set of 3 are made from high speed steel (HSS) consisting of:1 x 4-12mm1 x 6-20mm1 x 16-30mm The set is supplied in a metal storage case.

Read more less

The Faithfull Pro Tape Measure is ideal for any professional requiring accuracy and efficiency in every job. Its unique nylon wrapped blade is highly-wear resistant, anti-rust, acid-resistant, alkali-resistant, water-proof and fire-proof. The double-sided print simplifies awkward measurement angles. With metric and imperial measurements on the top and metric only measurements on the bottom. The class II blade is 32mm wide, giving an impressive standout of 3m. Ideal when working alone. A strong thumb lock secures the blade perfectly in place and the claw magnetic hook easily attaches to overhead objects. The robust ABS casing is impact resistant and is coated with soft-grip TPR, for making it an all round sturdy and comfortable tape measure. The bottom of the tape's casing has a blade guard to protect the triple riveted end hook when returning to its case. Available with metric only or metric and imperial graduations. Accuracy: Class IISpecification: Blade Length: 5m/16ftBlade Width: 32mmGraduations: Metric and Imperial

Read more less

This Faithfull Fibreglass Open Long Tape comes with a 13mm wide class III blade which is marked in both imperial and metric measurements. The fibreglass tape is resistant to scuffs, stretching, is impervious to moisture and comes fitted with a folding metal end hook. Its large measurement increments are clear to read in almost all weather conditions, and the tape is also easy to clean. The tough ABS open frame case has a fold away rewind handle, a comfortable, sturdy hand grip and an integral metal ground spike making it ideal for single person use. A geared rewind system allows the tape to be rewound back into the case at a fast rate. Accuracy: EC Class III.This Faithfull Fibreglass Open Long Tape has the following specifications: Blade Length: 30m/100ftWidth: 13mm

Read more less

Forgefix TechFast Composite Panels to Steel Hex Screws with 19mm EPDM washers, are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 19mm EPDM rubber washers.These Forgefix TechFast Composite Panels to Steel Hex Screws have the following specification: Size: 5.5 x 185mmInsulation Thickness: 92-150mmPack Size: 50Drill Tip: No.5 No.5 drill tip for self-drilling in heavy gauge steel up to 12.5mm.

Read more less

These Forgefix TechFast Roofing Screws are designed for use in joining timber to steel and for light section purlins. They have a Torx compatible, countersunk head to sit flush to the surface. The self-drilling point enables speedy insertion, and the wings create a clearance hole in the timber to eliminate the chance of 'jacking' when fixing. The screws are zinc plated and have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. These light section roofing screws are suitable for fixing timber to steel thicknesses of 1.5mm to 4mm. Each pack is supplied with a free Torx compatible bit.The TFCL5550 TechFast Roofing Screws have the following specifications: Size: 5.5 x 50mm.Pack quantity: 100.

Read more less

This Faithfull Wall Thermometer is a traditional wooden thermometer which is ideal for the home, conservatory, summer house or garage. Measures temperature in both Celsius and Fahrenheit. Mercury free. Range: -40°C to +50°C / -40°F to +120°F.The Faithfull FAITHWOODSM Thermometer Wall Wood is 260mm in length.

Read more less

These Faithfull HSS Turning Chisel 8mm Spindle Gouge are for use on woodturning lathes. They are manufactured from High-Speed Steel; these chisels will perform well in both hard and soft woods. They maintain a sharp cutting edge much longer than their carbon steel equivalents, requiring less time taken being re-sharpened.They are fitted with full sized contoured walnut handles for user comfort and brass ferrules. They have an 8mm Spindle Gouge used to scoop and cut deep ‘U’ grooves in spindle turning, and making holes. Specifications: Overall length: 410mm.Length of blade: 160mm.

Read more less

Forgefix TechFast Timber to Steel CSK/Wing Screws are used to join timber to steel frame buildings. The screws are fitted with breakaway wings that create a clearance hole to protect thread from engaging timber when drilling through. Breakaway wings will ream a hole, then break-off when they contact the metal surface to be drilled. The thread will then engage with metal. They have a TORX® compatible insert for a higher transmission of power. With improved countersinking from recessed ribs. Fire and corrosion resistant. Complies with EU Safety, Health and Environmental requirements.These Forgefix TechFast Timber to Steel CSK/Wing Screws have the following specification: Size: 5.5 x 150mmClamping Thickness: 130mmEffective Thread Length: 129mmPack Size: 50Drill Tip: No.3 No.3 drill tip for self-drilling heavy gauge steel up to 5mm.

Read more less