New products

The Uni-Com Compact Segment Timer will automatically switch household appliances on and off at chosen preset times. Simply click down segments to set on/off times (one segment = 15 minutes). Makes your home more energy-efficient, saving £££s. It also helps to increase home security by automatically operating lamps to make your home look occupied when you are out. Specification: Voltage: 230V 50HzRating: 13 amp (3kW)Size (HxWxD): 76 x 78 x 51mm

Read more less

Trend FFP2 NR Fold Flat Mask with HEPAC filtration for protection against fine, nuisance dust particles, such as softwood dust, sheet materials, (not MDF or hardwood) and fibreglass. With efficiency above 94% for increased respiratory protection. The entire surface area of the mask is the filter making it highly efficient whilst also making breathing easier. It provides day-long protection, up to 8 hours. Elasticated, adjustable straps help to provide a better fit and increased comfort. There is also an adjustable nose clip for increased comfort and a tighter nose seal. The fold-flat design allows it to easily slip into a pocket when not required. Pack Quantity: 10

Read more less

The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes with a variable pitch of 29 to 63mm. Use on timber, MDF, plywood and blockboard. It allows a variety of joints to be created individually. Uses square drive self-tapping screws. Workpiece can be handled immediately after gluing and screwing, creating time-saving benefits. No clamps required.The Trend PH/JIG Pocket Hole Jig is supplied with: 100 x Dome Head Screws, 1 x Face Clamp, 1 x HSS Drill Bit With Collar, 1 x 75mm Square Drive Bit, 1 x 150mm Square Drive Bit.

Read more less

The Trend T421/35 hinge cutter is typically used by kitchen unit manufacturers and fitters for cutting 35mm blind holes ready to accept recessed circular hinges, it has a TCT blade for longer life.This bit is best suited for use on thinner section laminate covered board.Diameter - 35mmShank - 1/4in

Read more less

The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes with a variable pitch of 29 to 63mm. Use on timber, MDF, plywood and blockboard. It allows a variety of joints to be created individually. Uses square drive self-tapping screws. Workpiece can be handled immediately after gluing and screwing, creating time-saving benefits. No clamps required.This replacement stepped drill bit for the Pocket Hole Jig has a diameter of 9.5mm (3/8in).

Read more less

The Trend 50 Piece Router Bit Starter Set contains a range of popular 1/4in tungsten carbide tipped cutters for a variety of applications. Suitable for softwood, hardwood, chipboard, plywood and MDF. Supplied in an aluminium carry case. Contains: 2 x Single Flute Straight: 3 x 12.7mm and 4 x 12.7mm.8 x Two Flute Straight: 6 x 16mm, 8 x 19mm, 9.5 x 19mm, 12.7 x 19mm, 14.2 x 19mm, 15.9 x 19mm, 19 x 19mm and 20 x 19mm.4 x Guided Flush Trim: 9.5 x 12.7mm, 9.5 x 25.4mm, 12.7 x 12.7mm and 12.7 x 25.4mm.1 x Combination Bevel: 12.7mm x 60°.1 x Mortiser Cutter: 12.7 x 12.7mm.1 x Classic Panel Cutter: 12.7 x 9mm.1 x Keyhole Cutter: 9.5mm.3 x Core Box: R3.2, R4.8 and R6.35mm.2 x Long Series Core Box: R4.8 and R6.35mm.2 x 60° V-Groove: 9.5mm and 16mm.2 x 90° V-Groove: 9.5mm and 12.7mm.4 x 14° Dovetail: 9.5mm, 12.7mm, 14.3mm and 16mm.1 x Pierce & Trim: 6.35 x 18mm.2 x Guided Cove: R6.35 and R9.5mm.4 x Guided Round Over: R3.2, R6.3, R7.9 and R9.5mm.4 x Guided Ovolo: R3.2, R6.35, R7.9 and R9.5mm.2 x Guided Roman Ogee: R4 and R6.35mm.2 x Guided Chamfer: 25° and 45°.2 x Guided Slotter: 6.35mm kerf and 9.5mm kerf.1 x Guided Rebater (Ø x cut): 28 x12.7mm, Rebate: 9.5mm.1 x Guided Classic Decor: R9mm.

Read more less

The Trend Rota – Tip Replacement Screws are tapered head replacement screws for Trend Rota- Tip router cutters. They are high quality replacement screws providing the correct fixings to secure the Rota-Tip blades for maximum performance.The Torx head fitting ensure secure tightening pressure when fitting blades, the 6mm tapered head provide correct clamping pressure to the blades for safe operation and ensures the Rota-Tip cutters are always ready to go. Specifications: Head type: tapered x 6 mm diameter.Thread: M3.5 x 0.6.Thread length: 5 mm.Driver type: Torx.

Read more less

The Trend Snappy Flip Over Driver Set - 4 Piece Set - is for tasks involving multiple piloted countersink and screwing work, the Trend Snappy Flip Bits are designed to speed up the task using a double-ended driver and countersink combination. A very fast and efficient way to pilot, countersink and drive screws by simply flipping the bit to move from drilling to driving, increasing productivity and efficiency across all working practices.They are supplied with a quick-change shank for fitting into Trend Snappy Quick Chuck with three double ended screwdriver and piloted countersinks for No6, 8 and 10 gauge screws. The drill lengths can be adjusted for different piloting depths with each one fitted with No 2 Pozi drive insert bits. Specifications: Main Body Adaptor Diameter: 17mm.Overall Length: 102mm.

Read more less

Hinge Sinkers for drilling machines. TCT Hinge sinking cutter for pillar drills only. Designed for recessing holes in melamine covered chipboard to receive circular hinges. Diameter. 35mm.Shank. 8mm.

Read more less

Trend solid carbide planer blades fit portable electric planers and are supplied in pairs.They have two cutting edges and are reversible, giving extended life.Planer blades must be securely clamped so they cannot work loose during use.For use with the following planers:AEG - EH82, EH82-1, EH700, EH822, H750, H500, EH3-82, EH800, EH450.Black & Decker - BD710, DN710, DN720, BD711, KW713, KW725, BD713, BD725.Bosch - PHO2-82, PHO3-82, PHO3-82B, PHO100, PHO150, PHO200, PH300, PHO15-82, PHO25-82, PHO30-82, 1592-9, GHO282, GHO31-82, GHO36-82c.DEWALT - DW677, DW678K, DW678EK.Draper - P882Felisatti - TP282Haffner - FH224Hitachi - P20V, P20SA.Holz-Her - 2321, 2321-S, 2322, 2223 (new), 2121, 2330.Mafell - EHU82, MHU82, MHU82S, MHU82D.Metabo - Expert 4382, HO0882, HO8382.Nutool - NPT82Perles - SK82APeugeot - RA82CS, RA400, RA3/82.Skil - 92H, 94H, 95H, 96H, 97H.Ryobi - L282, L-1835, L180.Wolf/Kango - 8108For use with the following planers but will need a Trend PB/CK/119 Conversion kit:Hitachi - F20, FU20.Makita - M102, 1900, 1900B, 1901, 1125, 1100, 1923B, 1923BD.Ryobi - L1323A, HL-82.Wolf/Kango - 8614. 8657.

Read more less

Self-guiding cutters with bearings mounted for trimming and bevelling timber, lippings and plastic laminate edges for cabinet making, countertop production or any shaping applications. Bearing guided cutters are suitable for both straight and curved work, bearings are normally fractionally larger than cutter diameter, to avoid surface scoring. Uses:Trimming plastic or plywood overlay.Copy profiling - use the bearing to follow a template or base edge of board. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Tooling Tungsten Carbide1/2in Shank.Tooling Tungsten Carbide1/4in Shank.Angle A = 90° D = 12.7 mmC = 25 mm

Read more less

The Trend PH/JIG/BS Single Pocket Hole Jig is for fast and accurate joining of solid timber and plywood giving strong instant joints in single or multiple fixing positions. It can help to build cabinets, furniture and small joinery projects with ease. The hardened drilling sleeves provide accurate, consistent pockets. There is also a handy built-in drill depth gauge that can be reversed for new or repair work. Works with timber thicknesses from 12mm to 38mm. Portable and adaptable. Supplied with: 1 x Pack of Assorted Screws, 1 x 150mm Square Drive Bit and 1 x HSS Drill Bit with Collar.

Read more less