New products
Faithfull Faithfull Adjustable Support Props 1.6m to 2.9m (Pack 2)
The Faithfull Adjustable Support Props are designed for use as an extra pair of hands when supporting ceiling boards and sheet materials during overhead fixing. With an adjustable working height. The feet at both ends swivel to accommodate sloping or uneven surfaces and improve grip. Supplied in a hardwearing storage bag to provide added protection. MUST NOT be confused with heavyweight equivalents which are designed to support heavy loads over extended periods. Specification Working Height: 1600-2900mmMax. Working Load: Vertical: 60kg, @45°: 20kg
£68.99
-
Faithfull Faithfull Slip Joint Water Pump Pliers 250mm
The Faithfull Slip Joint Water Pump Pliers are suitable for gripping pipes, nuts, bolts and irregularly shaped objects. The offset jaws are angled to ensure a positive action and apply extra power when leverage and grip are applied. The sliding pivot ‘slip-joint’ on the lower jaw enables rapid adjustment to seven pre-set positions, give the advantage of a wide range of jaw openings up to 60mm, without the distance in the handle growing wider making them difficult to grip. The long handle design provides increased leverage for a positive grip. Manufactured from chrome vanadium steel with vinyl soft feel coating for user comfort.
£9.99
-
Faithfull Faithfull End Cutting Pliers 200mm (8in)
Faithfull End Cutting Pliers are ideally suited for cutting soft, medium and medium-hard wire extrusions close to the surface. Manufactured from chrome vanadium steel with a rustproof, satin nickel finish. The hardened cutting jaws are set at 90° to the handle for cutting wire in otherwise inaccessible areas. Fitted with cushion grip sleeves for user comfort. Tested and certified to the GS standard. ROHS compliant.
£14.99
-
Faithfull Faithfull Fibreglass Handle Pick Axe 3.17kg (7 lb)
The Faithfull Pick Axe has a high quality solid eye navy pick head with chisel and point for the breaking of concrete. This tool is virtually unbreakable and incorporates a soft-grip, non-slip fibreglass handle.
£39.49
-
Faithfull Faithfull Aluminium Quick-Action Sash Clamp 800mm (32in) Capacity
These Faithfull clamps offer a low cost alternative for light to medium-duty clamping tasks. Constructed from a 'U' box section aluminium extruded bar and fitted with a cast head and foot, the construction design makes these clamps both lightweight and strong. The quick-release slide enables the clamping capacity to be changed in an instant, with adjustment slots situated at 25mm (1in) increments along the bar. Deep cut Acme threads on the mainscrew and a tommy bar combine to provide a quick and powerful clamping action.1 x Faithfull Aluminium Quick-Action Sash Clamp - 800mm (32in) Capacity.
£20.99
-
Faithfull Faithfull Small Paint Mixing Paddle 60 x 400mm
The Faithfull Small Paint Mixing Paddle has a 8mm hexagon shank for use in power drills of at least 400W and above. It is perfectly balanced and is quiet in operation. Mixes between 1-5 litres of paint. Specification Length: 400mm.Paddle Diameter: 60mm
£5.49
-
Faithfull Faithfull Standard Masonry Drill Bit 8 x 400mm
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.8 mm x 400 mm.
£6.99
-
Faithfull Faithfull HSS Step Drill Bit 4-14mm
Faithfull Step drills are used for cutting varying hole sizes in material up to 4 mm thick without changing the drill bit. Each drill cuts parallel holes within a specific size range, rising in 2mm increments.Sizes 4 to 14 mm. Increments of 2.0 mm. Max thickness 4 mm. Made from HSS ( High-Speed Steel ). Shank: 6 mm diameter.
£12.49
-
Faithfull Faithfull Standard Masonry Drill Bit 4.5 x 85mm
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size. 4.5 mm x 85 mm.
£1.49
-
Faithfull Faithfull Standard Masonry Drill Bit 11 x 150mm
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Manufactured to DIN 8039. Zinc plated finish and packed individually. Size.11 mm x150 mm.
£3.49
-
Faithfull Faithfull Standard Masonry Drill Bit 14 x 300mm
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Manufactured to DIN 8039. Zinc plated finish and packed individually. Size.14 mm x 300 mm.
£8.99
-
Faithfull Faithfull Standard Masonry Drill Bit 9 x 150mm
Faithfull Standard masonry bits are for use in chucks up to 13mm capacity and are suitable for general purpose drilling including bricks, blocks and cement render when used in an impact or percussion drill. A roll formed and treated body with a heavy-duty Tungsten Carbide tip and fast spiral for quick waste removal.Size.9 mm x 150 mm.
£3.49
