New products

The Trend Gauge/1 is a metal rule Depth Gauge to accurately set the height of router cutters and saw blades. It will measure both horizontal and vertical, for hand router, router tables and saw benches. It has a 60mm wide aperture and is accurate to 0.5mm with an 80mm measurement range.This Trend gauge has U section plastic injection moulding with unique cam lever lock, and a steel rule with metric and imperial scale. The gauge is self-standing for setting cutter depth on router tables and low profile for back fence adjustment.

Read more less

This Trend Folding Pocket Flush Saw is suitable for cutting dowels, plugs and dovetails.Manufactured in Japan, the non-set teeth can cut right at the surface without marking the surface, which makes it ideal for dowel trimming and dovetail joint trimming. The blade is 0.4mm thick, which allows flexibility to allow cutting flush with the surface. The 120mm blade has a fine polished finish with 22 TPI (1.15mm pitch) and cuts on the pull stroke and is made from high carbon steel with an impulse hardened edge for long life.The saw handle is made from soft touch elastomer-plastic and includes a hanging hole for easy storage in the workshop.

Read more less

This Trend GRAB/SE1/set Damaged Screw Remover Set (2pc) has versatile double-ended bits to remove damaged screws, machine screws and broken bolts from wood, metal and plastic. Made from high-speed steel they can remove screw sizes from Nos. 6 - 14 and broken bolts from size M4 - M8, they will remove these cleanly from wood, metal or plastic.Removing screws made of any alloy, including soft brass, and also removes free spinning screws. They have a Winslow tip for self-centring and are double ended (burnisher and tapered thread). The hex shoulder aids removal of jammed screws or bolts and the serrated extracting end of the tool results in torque for hard to remove screws. Specifications: Set of two bits, Size No 2 and No 3.Screw Sizes: No 6 to No 14.Bolt Sizes: M4 to M8.

Read more less

Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter: 18mmInside diameter: 15mmProjection from plate: 6mm

Read more less

The Trend Hinge Jig is a portable template set designed for recessing hinges in wooden doors and frames. Used on-site and in joinery shops to increase productivity with excellent results. Four apertures for fire door requirements. No need for marking out in the conventional way. Quick and simple to set-up as the hinge is used as the pattern. Clean and accurate recesses are achieved every time. Suitable for timber based doors and square butt hinges. Use with a light duty router with 1/4inch collet. Long reach router cutter required, 12mm diameter with 70mm overall length. Angled position slots to prevent creep. Patent No. GB2285410. Includes: 4 x Apertures, 2 x Bradawls, 1 x 16mm Guide Bush, 1 x T-Handle Hex Key, 1 x 4mm Spacing Gauge and 1 x Plastic Storage Tube. Specification Hinge Sizes Possible: Length Min/Max: 67-127mm (2.5/8-5in).Width Min/Max: 9.5-35mm (3/8-1.3/8in). Door Sizes Possible: Height Min/Max: 1955-2032mm (6ft 5in - 6ft 10in).Thickness Min/Max: 16-44mm.

Read more less

A 2-part hinge jig, portable template set designed for recessing hinges in wooden doors and frames.It is easy-to-use with minimal setting-up time, completing the job both accurately and quickly.Used on-site and in joinery shops to increase productivity with excellent results.Four apertures for fire door requirements.No need for marking out in the conventional way.Quick and simple to set-up as the hinge is used as the pattern.Clean and accurate recesses are achieved every time. Suitable for timber based doors and square butt hinges.Use with a light-duty router with 1/4 inch collet.Long reach router cutter required, 12 mm diameter with 70 mm overall length.Angled position slots to prevent creep. Hinge sizes possible: Length min: 2 5/8 in (67 mm). Length max :5 in (127 mm). Width min :3/8 in (9.5 mm). Width max: 1 3/8 in (35 mm). Door sizes possible: Height min: 6 ft 5 in (1955 mm). Height max: 6 ft 10 in (2100 mm). Thickness min: 5/8 in (16 mm).

Read more less

The Vitrex Grout Brush removes unwanted build up from tiles and grout lines. It features nylon bristles which work on all grout joint widths and a comfortable handle with a thumb rest to improve leverage. On the opposite side of the bristles, a square edge can be used for scraping. Ideal for usage on grout, tile and hard surfaces like concrete. Multipurpose, it can be used for cleaning jobs at home, patio, garage, car, camper, boat, motorcycle or trailer.

Read more less

The Weller WLIBA4 Cordless Soldering Iron allows you to skilfully solder anywhere, at any time. Ready to use in 38 seconds. The iron automatically shuts off into a 'locked' position when the cap is closed. Powered by 3 x AA batteries, so it's easy to swap out dead batteries and keep working.Specification:Input Power: 4.5WMax. Temperature: 460°CTip: Conical 0.4mmWeight: 210g

Read more less

The Vitrex Professional Grout Removal Tool is perfect for eliminating unwanted grout, mortar or sealant during tile installation. It features a co-moulded plastic handle with a non-slip, rubber grip for comfortable and reliable repeat use. The head features 3 durable double-headed carbide tips and is easy to reverse if the tips get dull. Simply unscrew, flip the head and replace the screw.

Read more less

The Vitrex Professional Grout Rake is designed to easily remove old, dirty or pitted grout. Strips, cleans and removes old grout and is usable on all grout types. Blade storage in interchangeable and convenient handle, which can hold up to 2 blades. Use 1 blade for thinner grout lines and 2 blades for wider grout lines.

Read more less

This Thor Round Solid Copper Mallet has the following specification:Round Head Diameter: 32mm (1.1/4in)Approximate Weight: 670gApproximate Length: 300mm (11.3/4in)

Read more less

This Thor Round Solid Copper Mallet has the following specification:Round Head Diameter: 44mm (1.3/4in)Approximate Weight: 1325gApproximate Length: 325mm (12.3/4in)

Read more less