New products

Zinsser DIF® Wallpaper Stripper is a patented wallpaper stripper based on enzyme action for fast and easy removal of wall coverings. With DIF®, wall coverings can be stripped quickly and reliably. It contains special enzymes - a unique, patented formulation with a superior more effective blend of wetting agents that speeds up penetration of the wallpaper and re-solubilisation of the paste. In contrast to DIF® Wallpaper Stripper, ordinary wallpaper remover solutions merely wet the paper and the paste, and therefore require a lot of scraping and do not work well except on loose sections. Softened paste tends to build up on the scraper blades, blunting them and leading to wall gouging. DIF® Wallpaper Stripper eliminates damage to walls caused by removal of uncoated, water-permeable wallpaper. Using DIF® Wallpaper Stripper is better than attempting to remove wallpaper with hot water, vinegar and water, or any other home brew solutions. Furthermore, it does not require the use of a steamer. Supplied as a powerful concentrate - just add water.Size: 2.5 litre.

Read more less

Zinsser DIF® Wallpaper Stripper is a patented wallpaper stripper based on enzyme action for fast and easy removal of wall coverings. With DIF®, wall coverings can be stripped quickly and reliably. It contains special enzymes - a unique, patented formulation with a superior more effective blend of wetting agents that speeds up penetration of the wallpaper and re-solubilisation of the paste. In contrast to DIF® Wallpaper Stripper, ordinary wallpaper remover solutions merely wet the paper and the paste, and therefore require a lot of scraping and do not work well except on loose sections. Softened paste tends to build up on the scraper blades, blunting them and leading to wall gouging. DIF® Wallpaper Stripper eliminates damage to walls caused by removal of uncoated, water-permeable wallpaper. Using DIF® Wallpaper Stripper is better than attempting to remove wallpaper with hot water, vinegar and water, or any other home brew solutions. Furthermore, it does not require the use of a steamer. Supplied as a powerful concentrate - just add water.Size: 1 litre.

Read more less

Zinsser Gardz® Sealer Primer is a clear, water-based, acrylic resin sealer that penetrates deeply into porous surfaces. It dries fast, and forms a hard, moisture-proof film that prevents drywall blistering and bubbling. It binds down chalky surfaces, strengthens soft texture finishes, and seals in residual wallpaper paste. Gardz® Sealer Primer can be applied to high-pH surfaces, and is easily cleaned up with soap and water. Recommended Uses: Damaged Drywall: prevents bubbles that form when damaged drywall is skim coated with spackling or joint compound. It penetrates and seals damaged facing paper, restoring it to a sound surface for repairs, suitable for painting or wallcovering. New Drywall / Joint Compound and Spackling: new gypsum drywall, joint compound and spackling are very porous and can make finish coatings appear splotchy and uneven. It penetrates and uniformly seals, creating a moisture resistant film that protects drywall from blistering, tearing and other damage when redecorating in the future. Plaster: freshly applied plaster is extremely porous but also extremely alkaline with a pH of 12.0 or more in many cases. Allow new plaster to cure at least 24 hours before applying. Before priming old, bare plaster, be sure to determine that the surface is clean, dry and in sound condition, taking care to repair any cracks or holes with spackling paste or joint compound before sealing the surface. Calcimine: is a very old form of plaster that is extremely chalky and water-sensitive. It penetrates calcimine more effectively than oil-base coatings and has a much lower odour. Because it resists moisture, it prevents water-based topcoat paint or texture finishes from softening up calcimine layers underneath. Wallpaper Adhesive Residue: water-based coatings or texture finishes will reactivate old wallpaper adhesive, resulting in cracking and peeling. Formulated to completely seal in residual adhesive and prevent it from ruining water-based topcoats and texture finishes. Texture and Popcorn Finishes: Can be used to seal textured walls and popcorn ceilings before applying water base primer or paint. It penetrates soft or crumbly texture material and hardens it, creating a durable, water resistant barrier that prevents primer or paint from softening texture material underneath. Old Wallpaper: most of the wallpaper installed before the 1960’s was true paper, with no vinyl coating. To determine if the wallcovering is a true paper wipe a wet sponge across the surface, if the water is readily absorbed it means there is no vinyl coating. This type of wallcovering can be effectively sealed. First, peel away any loose or frayed edges, or whatever remains should be firmly adhered to the wall. Apply as you would to any other wall surface. Pre-Wallcovering Primer: penetrates, seals, sizes and protects drywall facing paper and skim coat, providing a properly sealed surface for new wallcovering. At redecorating time, it protects the surface of the drywall when the old wallcovering is stripped off. Builder’s Flat Paint: penetrates chalky, builder’s flat paint and binds it to the wall, providing water-resistant protection from paint, wallcovering and texture finishes.Zinsser Gardz® Sealer Primer 1 litre Colour: Clear.Size 500ml.

Read more less

This Zinsser CoversUp™ Aerosol is a low odour vertical aerosol which is a stain killer and ceiling touch-up paint in one. Zinsser's stain blocking primer technology is incorporated into this next generation product offering a flat white finish, which matches most acoustic ceiling tiles and white ceiling paints.The Zinsser aerosol is a great stain blocking primer for any ceiling surface. It is the perfect touch up paint when you do not want to repaint the entire ceiling due to spot damage. One coat of CoversUp™ permanently blocks and seals most common ceiling stains.The aerosol is designed to meet the demands of professional and larger home improvement projects. The non-yellowing solvent-based formula dries in just 30 minutes and can be applied under or over any solvent-based or water-based topcoat. When used as a primer CoversUp™ can be top coated with any paint in just two hours. Covers 1.5m2 coverage per can on most surfaces. Specifications: Size: 400ml.Colour: White.

Read more less

VELCRO® Brand Stick On Tape is the easy-to-use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll in white or black. The adhesive reaches maximum strength after 24 hours.VELCRO® Brand Hook & Loop Stick On Tape comes in the following: Colour: Black.Size: 10m x 20mm.

Read more less

VELCRO® Brand Heavy-Duty Hook & Loop Stick On Strips are the quick and easy to use alternative to nails, screws and glues. With extreme holding power, holds weight up to 7kg per 50mm x 100mm piece (adhesive reaches maximum strength after 24 hours). Secures items in seconds, simply peel and stick - no tools required and they are suitable for use indoors and out. Supplied as 2 pre-cut strips allow for a quick and easy application.VELCRO® Brand Heavy-Duty Stick On Strips comes in the following: Size: 50 x100mm White.Colour: Black.

Read more less

Trend Kitchen Worktop Jig for worktops up to 650mm. Made from hard-wearing, CNC machined Compact Grade High-Pressure Laminate, 12mm thick. Cuts both parts of the joint in 15 minutes, including setting up. For cutting: left and right-hand corners, 400mm radius peninsular joint and 35mm kitchen door hole. With fixed lengths for 600mm, 616mm, 635mm and 650mm wide worktops. Cuts worktops up to 40mm thick, with or without anti-drip postformed edge. It can also be used to cut 2 open ended bolt recesses (dog bone style) for 150mm bolts. Ø10mm plastic pins with tapered shoulders for tight fit provides 3-point pin contact to ensure ease of setting up. The pins are made from ABS plastic for strength.

Read more less

The Trend Skeleton Hinge Jig is a 2-part, adjustable portable template set designed for recessing hinges in wooden doors and frames with a router. It is easy to use with minimal setting-up time, ensuring the job can be completed accurately and quickly. It is ideal for use on-site and in joinery shops to increase productivity with excellent results.The jig has fully adjustable apertures for fire door requirements and renovation work. It is ideal for fitting a new door into an old frame and is suitable for timber-based doors and square butt hinges. The jig is supplied with a carry case, bradawls and a special 16mm guide bush. Specifications:Pre-set hinge sizes: 20mm, 25mm and 30mm. Hinge sizes possible:Minimum length: 67mm (2.5/8in).Maximum length: 127mm (5in).Minimum width: 12.7mm (1/2in).Maximum width: 35mm (1.3/8in). Door sizes possible:Minimum height: 1,956mm (6ft5in).Maximum height: 2,100mm (6ft10in).Minimum thickness: 16mm (5/8in).Maximum thickness: 51mm (2in). Weight: 2.9kg.Overall length: 1,956mm.

Read more less

Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. Outside diameter: 16mmInside diameter: 14mmProjection from plate: 10mm

Read more less

Trend Guide Bushes can be attached to the base of the Router. They are designed to follow the contours of a template.Trend guide bushes can be attached to the base of the Router. They are designed to follow the contours of a template.. Outside diameter: 30mmInside diameter: 27mmProjection from plate: 6mm

Read more less

The Trend Gauge/1 is a metal rule Depth Gauge to accurately set the height of router cutters and saw blades. It will measure both horizontal and vertical, for hand router, router tables and saw benches. It has a 60mm wide aperture and is accurate to 0.5mm with an 80mm measurement range.This Trend gauge has U section plastic injection moulding with unique cam lever lock, and a steel rule with metric and imperial scale. The gauge is self-standing for setting cutter depth on router tables and low profile for back fence adjustment.

Read more less

This Trend Folding Pocket Flush Saw is suitable for cutting dowels, plugs and dovetails.Manufactured in Japan, the non-set teeth can cut right at the surface without marking the surface, which makes it ideal for dowel trimming and dovetail joint trimming. The blade is 0.4mm thick, which allows flexibility to allow cutting flush with the surface. The 120mm blade has a fine polished finish with 22 TPI (1.15mm pitch) and cuts on the pull stroke and is made from high carbon steel with an impulse hardened edge for long life.The saw handle is made from soft touch elastomer-plastic and includes a hanging hole for easy storage in the workshop.

Read more less