New products
IRWIN® Record® Irwin® Record® 135/7 Heavy-Duty Sash Clamp 1350mm (54in) Capacity
The Irwin Record 135 Series Heavy-Duty Sash Clamps have a bar section of 32 x 6mm (1.1/4 x 14in). The slide and head are guaranteed unbreakable and the slide is secured by a solid steel pin passing through one of the locating holes spaced along the steel bar. The steel mainscrew applies pressure quickly and smoothly through a fast acting, hard-wearing rolled thread. Slides and heads are flat bottomed so that the clamp will stand without support.1 x Irwin Record 135/7 Heavy-Duty Sash Clamp - 1350mm (54in) Capacity.
£70.49
-
IRWIN® Record® Irwin® Record® 200-45 Pipe Cutter 15-45mm
IRWIN Record 200-45 Pipe Cutter is perfect for cutting plastic pipe with exceptionally thin cutting wheel and roller.It will also cut copper tube but its use should be confined to one or the other as cutting copper will reduce the effectiveness of the wheel on plastics. Die-cast body with stove enamelled rust resistant finish. Capacity: 15 to 45mm (9/16 to 1 3/4in)
£30.49
-
IRWIN® Record® Irwin® Record® 135/6 Heavy-Duty Sash Clamp 1200mm (48in) Capacity
The Irwin Record 135 Series Heavy-Duty Sash Clamps have a bar section of 32 x 6mm (1.1/4 x 14in). The slide and head are guaranteed unbreakable and the slide is secured by a solid steel pin passing through one of the locating holes spaced along the steel bar. The steel mainscrew applies pressure quickly and smoothly through a fast acting, hard-wearing rolled thread. Slides and heads are flat bottomed so that the clamp will stand without support.1 x Irwin Record 135/6 Heavy-Duty Sash Clamp - 1200mm (48in) Capacity.
£68.99
-
IRWIN® Record® Irwin® Record® 92C Hinged Pipe Vice 3-50mm (1/8-2in)
IRWIN Record Hinged Pipe Vices are guaranteed against breakage with exceptional strength in load-bearing areas. Single V-jaw in frame moves between two V-jaws in the base to hold even the smallest pipe sizes securely. The self-locking frame is reversible for right or left-hand operation. Replaceable Steel Jaws and can be fitted to a bench and or stand.IRWIN Record 92C Hinged Pipe Vice. Pipe Capacity: 3-50mm (1/8-2in).
£222.49
-
IRWIN® Record® Irwin® Record® 182C Chain Pipe Vice 6-100mm (1/4-4in)
IRWIN Record Chain Pipe Vice rests on a V formed by two sets of drop-forged, heat-treated replaceable steel jaws. The high tensile steel chain is then looped over the pipe, locked into a slot between the jaws and tensioned by a handle and screw to provide a strong rigid three-point location which renders the pipe immoveable. Body castings are guaranteed against breakage.IRWIN Record 182C Chain Pipe Vice. Pipe Capacity: 6-100mm (1/4-4in).
£328.49
-
IRWIN® Record® Irwin® Record® 52ED Woodworking Vice 175mm (7in) with Quick Release & Dog
Record quick-release woodworking vices are fitted with quick release mechanisms, simple squeeze the trigger and a quick-release vice will be opened and closed without using the mainscrew. Large and small work pieces can be quickly interchanged, while releasing the trigger returns the mechanism to normal for fine adjustment. An ideal addition to the engineering workshop or tool room. For clamping and holding wood work pieces. The adjustable front stop or dog gives an additional cramping facility when used in conjunction with a bench stop. A useful addition which provides a normal vice and tail vice in one tool. Two steel guide rods to reduce wear and ensure a smooth parallel action Jaws 'toe in' so that when pressure is applied they give an even clamping over the whole depth of the work piece. Adjustable dog used in conjunction with bench stops fitted into the bench top. Location holes are provided so you can fit your own choice of wooden cheeks to protect the work pieceJaw Width. 175mm (7in). Jaw opening: 200mm (8in)
£191.49
-
IRWIN® Record® Irwin® Record® 119 Medium-Duty Forged G-Clamp 100mm (4in)
IRWIN Record Medium-Duty Forged G-Clamp are a drop-forged steel clamp and the slim section permits use in situations where space is limited. Particularly useful for the craftsman with smaller work, the boat builder and the handyman. Have a blue stove enamelled finish. Come in the following sizes: REC1192: 50mm.REC1193: 75mm.REC1194: 100mm.REC1196: 150mm.IRWIN Record Medium-Duty Forged G-Clamp. Size: 102mm (4 in). Throat depth: 44mm (1 3/4 in).
£13.49
-
IRWIN® Record® Irwin® Record® 52.1/2ED Woodworking Vice 230mm (9in) with Quick Release & Dog
Record quick-release woodworking vices are fitted with quick release mechanisms, simple squeeze the trigger and a quick-release vice will be opened and closed without using the mainscrew. Large and small work pieces can be quickly interchanged, while releasing the trigger returns the mechanism to normal for fine adjustment. An ideal addition to the engineering workshop or tool room. For clamping and holding wood work pieces. The adjustable front stop or dog gives an additional cramping facility when used in conjunction with a bench stop. A useful addition which provides a normal vice and tail vice in one tool. Two steel guide rods to reduce wear and ensure a smooth parallel action Jaws 'toe in' so that when pressure is applied they give an even clamping over the whole depth of the work piece. Adjustable dog used in conjunction with bench stops fitted into the bench top. Location holes are provided so you can fit your own choice of wooden cheeks to protect the work pieceJaw Width. 230mm (9in).Jaw opening: 330mm (13in)
£265.99
-
IRWIN® Record® Irwin® Record® 136/5 T-Bar Clamp 1050mm (42in) Capacity
IRWIN Record 136/5 T-Bar Clamp is a robust clamp for heavy-duty work which offers the facility of permanent fixing to a workbench. T-bar section in cold drawn steel gives extra strength and resistance to bending. Extra long head with machined slides is extremely durable.The IRWIN Record 136/5 T-Bar Clamp has the following specifications:Bar Length: 1200mm (48in).Capacity: 1050mm (42in).
£81.99
-
IRWIN® Record® Irwin® Record® 300 Stillson Wrench 900mm (36in)
IRWIN Record Stillson Wrenches are standard equipment in a wide range of major industries. They have drop forged handles and jaws, with high-grade cast malleable iron frames. Accurately machined screw threads and nut with sprung jaw which stays open until pressure is applied. Conforms to BS 3594 Part 1.Length. 900mm (36 in). Pipe Capacity Nom. Bore 89mm (3 1/2 in).
£298.49
-
IRWIN® Record® Irwin® Record® 135/9 Heavy-Duty Sash Clamp 1650mm (66in) Capacity
The Irwin Record 135 Series Heavy-Duty Sash Clamps have a bar section of 32 x 6mm (1.1/4 x 14in). The slide and head are guaranteed unbreakable and the slide is secured by a solid steel pin passing through one of the locating holes spaced along the steel bar. The steel mainscrew applies pressure quickly and smoothly through a fast acting, hard-wearing rolled thread. Slides and heads are flat bottomed so that the clamp will stand without support.1 x Irwin Record 135/9 Heavy-Duty Sash Clamp - 1650mm (66in) Capacity.
£71.99
-
IRWIN® Record® Irwin® Record® T850026 Plastic Pipe Cutter 26mm
The Record Irwin T850026 Plastic Pipe Cutter features a V shaped blade which allows for an off-centre motion, reducing tube deformation. The blade provides increased cutting pressure whilst remaining easy to use. The slicing motion of this specially hardened steel blade means that it is sharpened every time a cut is made. Capacity: 26mm.
£26.99
