New products
Trend Trend C152 x 1/2 TCT Bearing Guided Biscuit Jointer 4.0 x 37.2mm
This TCT two wing slotting cutter is ideal for biscuit jointing sizes The set is supplied with 3 ball bearing guides to suit the three sizes of biscuits available. A slighlty longer cut than the length of the biscuit is required for ease of alignment during assembly Supplied with instructions. No. 0 - 45 mm x 15 mm x 4 mm Suitable for 8-12 mm boardsUse bearing B19A 9.05 mm depth No. 10 - 53 mm x 19 mm x 4 mmSuitable for 13-18 mm boardsUse bearing B16A 10.6 mm depth No. 20 - 58 mm x 23 mm x 4 mmSuitable for 19 mm + boardUse bearing B127A D1 37.2 mm Cut length 4 mm B 12.7 mm B2 16.0 mm B3 19.0 mmShank = 1/2in
£52.49
-
Trend Trend Digital Angle Finder 200mm (8in)
The Trend DAF/8 Digital Angle Finder has a large LCD display with digital readout to allow easy reading of angles. It calculates angles from 0-220° and up to 360° when the locking knob is removed. Ideal for measuring internal and external angles quickly. The angle finder has a large aluminium stock for stability and accuracy and a robust yet lightweight aluminium construction butt. The 50mm wide blade with locking function has a dual metric/imperial scale and a 90° angle check on the end of the blade. The angle finder is easy to operate with 3 buttons - on/off, hold and zero/ABS. When used in ABS mode, the readout always reads correctly. In addition, it has a spirit level vial. Resolution: 0.05°/ 3 minutes.Measuring range: 0.0°-220.0°Accuracy: 0.15°.
£61.49
-
Trend Trend C002 x 1/4 TCT Two Flute Cutter 4.0 x 11.1mm
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.The Trend C002 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 4mm (5/32in)Cutting Depth: 11.1mm (7/16in)Overall Length: 60mmShank Diameter: 1/4in
£19.49
-
Thor Thor 710NF Replacement Nylon Face 32mm
All purpose replacement screw-in white nylon faces which will not mark finished surfaces. For light and heavy assembly work.For use with Thor nylon hammers THO710 and THO1010. Diameter: 32 mm (1 1/4in).
£2.49
-
Trend Trend CR/PB29 CraftPro Planer Blades 82mm (Pack 2)
This Trend Craft Pro Trend solid carbide Planer Blades are manufactured from high grade carbide and are supplied in pairs, precision ground with two cutting edges and reversible for extended life.They have two cutting edges and reversible for twice the life. The blades are supplied in a plastic case for safe storage. Specifications: Length: 82mm.Width: 5.5mm.Thickness: 1.1mm. They will fit the following - AEG (Atlas Copco) EH82, EH82.1, EH700. EH822 H750, H500, EH3-82, EH800, EH450.Black & Decker BD710, DN710, DN720, BD711, KW712, KW713, KW725, BD713, BD725.Bosch PH02-82, PH03-82/B, PH015-82, PH016-82, PH025-82, PH030-82, PH0100, PH0150, PH0200, PH300, 1592-9, GH0282, GH31-82, GH036-82C.Casals CE82, CE98ACE.Dewalt DW677, DW678K, DW678EK, DW680, D26500, D26501.Draper PT682, P882.Felisatti TP282.Ferm FP82.Freud FE82, FE82VCE.Haffner FH224.Hitachi F20, FU20, P20V, P20SA.Holz-Her 2321, 2321-S, 2322, 2223 (NEW).Mafell EHU82, MHU82, MHU82S, MHU82D.Makita M102, 1900, 1900B, 1901, 1125, 1100, 1923, 1923BD, 1923H, 1902 ,FB0800.Metabo EXPERT, 4382, HO0882, HO8382.Nutool NPT82.Perles SK82A.Peugeot RA82CS, RA400, RA3/82.Ryobi L282, L1323A,HL-82, L-1835, L180, GH014, EPN-7582.Skil 92H, 94H, 95H, 96H, 97H.Wolf/Kango 8614, 8057, 8108.Some Makita, Ryobi, Hitachi and Wolf/Kango planers require conversion kit ref PB/CK/119.
£12.99
-
Trend Trend C013 x 1/4 TCT Two Flute Cutter 9.5 x 19.1mm
The Trend CraftPro Cutter with two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber-based materials. With a bottom cut feature. The PTFE coating minimises heat and resin build-up for increased cutter performance and longevity.The 1/4in shank for easy control in smaller routers with 'K' mark shank to ensure safe working practices. Suitable for a wide range of applications such as engraving, grooving, rebating and shallow morticing. Use on softwoods, hardwoods, MDF, plywood and chipboard.The Trend C013 x 1/4 TCT Two Flute Cutter has the following specification: Cutting Diameter: 9.5mm (3/8in)Cutting Depth: 19.1mm (3/4in)Shank Diameter: 1/4in
£16.99
-
Thor Thor 712VF 38mm Soft Grey Plastic Face to Fit 712R
Thor GREY - SOFT PVC with Shore hardness A63-73. These faces will not mar finished surfaces. Ideal for flat pack furniture assembly, woodworking.The Thor 712VF 38mm Soft Grey Plastic Face to Fit 712R, they are shore hardness A63-73, but will not mark finished surfaces. They are ideal for flat pack furniture assembly, woodworking. Specifications:Face size: 38mm.Weight: 35g.Colour: Grey.
£2.99
-
Thor Thor 720NF Replacement Nylon Face 63mm
All purpose replacement screw-in white nylon faces which will not mark finished surfaces. For light and heavy assembly work.For use with Thor nylon hammers THO720 and THO2020. Diameter: 63 mm (2 1/2in).
£6.49
-
Trend Trend Digital Angle Rule 300mm (12in)
This Trend Digital Angle Rule calculates angles quickly and accurately and is ideal for woodworking, construction and machining. The rule is made from stainless steel with both metric and imperial scale. It has a rule locking function, and is easy to operate. The rule will automatically shut off in 6 minutes. Specification Measuring Range: 0° to 360°Resolution: 0.1°Accuracy: 0.3°1 x Trend Digital Angle Rule 300mm (12in)
£39.49
-
Trend Trend C116 x 1/4 TCT 90° Bearing Guided Trimmer Cutter 12.7 x 25.4mm
Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Made from TCT.This Trend TCT 90° Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 12.7mmCutting Depth: 25.4mmShank: 1/4in
£24.99
-
Thor Thor 416PF Plastic Face 50mm
Replacement screw-in plastic orange faces for Thor plastic hammers. Medium hard all purpose face, for light and heavy assembly work.For use with Thor plastic hammer THO416. Diameter: 50 mm (2in).
£3.49
-
Trend Trend C056A x 1/2 TCT Radius Cove Cutter 9.5mm Radius
Trend TCT Radius Cove Cutter with two flutes and carbide TCT tips for a cleaner cut and fast clearance of waste in all timber and timber-based materials. Its PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. Fitted with a 1/2in shank, 'K' marked to ensure safe working practices. Ideal for classic decorative mouldings and edge details. Specification: Radius: 9.5mmCutting Depth: 12.7mmShank: 1/2in
£42.99
