Best selling products

The Einhell Power X-Change Li-ion Batteries are controlled by a micro-processor, which monitors its key parameters such as temperature, voltage and current strength. This provides effective protection against overheating and ensures the right balance for optimum operating conditions. The battery can be charged irrespective of its charge level. An automatic check establishes conditions on which the charging process depends. In normal conditions, for example, the high-speed charging process is started directly. In other conditions, e.g. extreme cold or exhaustive discharge, gentle charging is performed at reduced current strength. This charging method protects the battery and is essential for ensuring a long service life. The intelligent charge control system controls each battery cell individually, ensuring each cell is fully charged. This produces maximum supply of power. Overcharging is not possible, so even a charged battery can remain in the charger. The battery has a 3-stage LED indicator which indicates not only the battery charge, but also extreme temperature conditions. It also has a triple shell design for optimum protection against damage. The Einhell PX-BAT5 Power X-Change Battery has the following specification: Battery Capacity: 5.2Ah.Battery Chemistry: Li-ion.Voltage: 18V.

Read more less

The Einhell TC-OS 18/187 Li Solo Orbital Sander is ideal for grinding/sanding flat surfaces. Thanks to the micro hoop & loop fastening, changing the abrasive paper is quick and easy. There is also a clamping device for sheets of sanding paper. Fitted with large soft grip surfaces for comfortable handling. Part of the Power X-Change series, powered by Lithium-ion rechargeable batteries with a battery management system for a long-life. This orbital sander comes as a Bare Unit, NO battery or charger.  Supplied with: 1 x Sanding Sheet, 1 x Dust Bag and 1 x Vacuum Adaptor. Specifications: Oscillating Speed: 24,000/min.Oscillating Circuit: 2mm.Sanding Area: 187 x 90mm.Sandpaper Size: Hook & Loop 187 x 94mm, Clamp-connection: 237 x 94mm

Read more less

The Einhell Power X-Change Li-ion Batteries are controlled by a micro-processor, which monitors its key parameters such as temperature, voltage and current strength. This provides effective protection against overheating and ensures the right balance for optimum operating conditions. The battery can be charged irrespective of its charge level. An automatic check establishes conditions on which the charging process depends. In normal conditions, for example, the high-speed charging process is started directly. In other conditions, e.g. extreme cold or exhaustive discharge, gentle charging is performed at reduced current strength. This charging method protects the battery and is essential for ensuring a long service life. The intelligent charge control system controls each battery cell individually, ensuring each cell is fully charged. This produces maximum supply of power. Overcharging is not possible, so even a charged battery can remain in the charger. The battery has a 3-stage LED indicator which indicates not only the battery charge, but also extreme temperature conditions. It also has a triple shell design for optimum protection against damage. This Einhell Power X-Change Battery Twin Pack contains: 2 x PX-BAT4 Power X-Change Batteries 18V 4.0Ah Li-ion.

Read more less

The Einhell TC-JS 60 Jigsaw has a user-friendly design and all the basic functions for beginners. The blade speed control electronics ensure material-compatible operation. Mitre cuts up to 45° are possible with the swivel soleplate. Offers dust extraction option via an adaptor, helping keep the workplace clean and free from debris.

Read more less

Member of the Power X-Change family Lightest angle grinder of its class Softstart function and restart safeguard to make it safer to use Overload cut-out for a long service life Modified air guidance for better cooling and longer service life Very smooth operation thanks to separation of motor and gearing Robust aluminium gear housing Slimline design with ergonomic softgrip Additional handle can be fitted flexibly in 3 positions Recommendation for optimum results: 2.5 Ah battery & higher Supplied without battery and charger (available separately) Supplied without cutting disk

Read more less

The Einhell TE-CI 18 Li Power X-Change Cordless Impact Driver is fitted with a unique triathlon motor that is powerful and efficient for the highest demands in power-sapping screwdriving jobs. It has a special impact mechanism to eliminate any torsion forces on the user’s wrist, users can therefore effortlessly tighten large and long screws. The short, lightweight design has ergonomic soft grip surfaces and a rugged aluminium housing that has additional rubber supports for increased protection. The driver has precision speed control for fine adjustment on delicate jobs. Other features include: a standard Allen screw mount (it is recommended that you use impact resistant bits), practical belt clip and 3 power LEDs included for good all-round illumination.

Read more less

Lightweight for comfortable handling Softgrip Two-handed on/off safety switch Auxiliary handle for optimal ergonomics Wide hand guard Aluminium blade cover Blades made from laser-cut and diamond-ground steel Metal transmission for long service life Cable strain relief

Read more less

The Einhell TC-MG 18 Li-Solo Multi Tool is a flexible, high-quality helper for extension, renovation and restoration jobs. Its comprehensive features help to make easy work of jobs such as sawing, grinding/sanding or scraping. Designed for ergonomic operation, so it saves a great deal of effort when used in practice. A soft grip ensures safe and comfortable operation. Fitted with an oscillation decoupled battery uptake for vibration reduction. Magnetic tool fixation enables the user to change tools quickly and easily. The chuck also has twelve adjustable settings. Speed electronics allows the tool to be adapted to the particular material and application. Member of the Power X-Change family, compatable with all Power X-Change batteries and chargers. Comes as a Bare Unit, No battery or charger. Supplied with: 1 x Triangular Grinding/Sanding Plate.9 x Sanding Sheets (3xP60/3xP80/3xP120).1 x Scraper.1 x Plunge Cut Blade.1 x HSS Segment Saw Blade. Specifications: No Load Speed: 20,000/min.Oscillating Angle: 3.2°.Blade Fitting: Starlock.Weight: 0.88kg without Battery.

Read more less

The Einhell GE-UB 18/250 Li E-Solo Power X-Change Leaf Blower can be used for various applications in the home and garden, for example as a leaf blower with a long blowing pipe, as a workshop blower with a medium blowing pipe or as a grill ignition aid with a short precision blowing pipe. Its LED display provides information about the set speed at a glance. Electronic speed control ensures the required adjustment is made. The softgrip ensures good grip and fatigue-free working. With integrated wall mount for easy storage. Offers wireless freedom as a member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger. For optimal results, a 2.5Ah battery or higher is recommended.  Specifications: Air Speed: 250 Km/h.Max. Blowing Power: 120 m³/h.Weight: 1.1kg.

Read more less

The Einhell TE-CN 18 Li-Solo Power X-Change Nailer is perfect for your garage or workshop and renovation work. Fixing objects with staples or nails is easy with stapler-nail gun combo. The robust gearbox allows up to 20 impacts/min., while depth adjustment ensures variable impact depth. Working close to edges is possible thanks to the slim stapler nose. The magazine has a level indicator providing an overview of the current load and maximum capacity of 100 nails or clamps, all securely held by a magnet. It can be easily opened and refilled at the push of a button. The pressure mechanism on the stapler nose allows safe working, while large softgrip surfaces offer comfortable and firm hold. Delivery includes practical belt clip for safe storage and 300 nails (32mm) + 300 staples (19mm). With the supplied hexagon key, nail/staple jams can be easily and quickly fixed. Release protection prevents unintentional tacking/nailing, preventing injury. Member of the Power X-Change family. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Shots per Minute: 20.Staple Length: 16-22mm.Staple Width: 5.7mm.Nail Length: 32mm.Nail Width: 15mm.Magazine Capacity: 100.Weight: 2.07kg.

Read more less