Products

A fast drying, water-resistant, PVA wood adhesive with a bond strength stronger than the wood itself. For use as a general purpose, joinery adhesive, or for applications where long term resistance to moisture is a pre-requisite of the adhesive. Conforms to the requirements of category D3/3 and D3/4 of EN204. Meets the resistance to sustained load (creep test) requirements of BS 4071 “Polyvinyl Acetate (PVA) Emulsion Adhesives for Wood".Rapid bond strength development. Suitable for hard and soft woods, decorative laminates, chipboard, blockwood and other engineered timber panels. Can be used in applications where joints may be subjected to short term water contact or exposure to high humidity i.e. kitchen work surfaces, window frames, doors and stairs, but not permanent immersion in water. Suitable for interior and exterior applications.

Read more less

A waterproof D4 grade wood adhesive with none of the safety issues associated with conventional isocyanate containing (polyurethane) D4 grades. Features & Benefits:- Excellent water resistance, suitable for water immersion - Fast setting - Short press time - It is possible to process wood species like pine or spruce with pressing times of minimum 12 minutes - Improved adhesion on difficult wood species (e.g. oak, larch) - Low timber staining characteristics; no discolouration of the glue line due to the influence of process heat (e.g. HF-press)- Improved heat and water resistance when using high process temperatures (e.g. 70°C).Rapid bond strength development. Suitable for hard and soft woods, decorative laminates, chipboard, blockwood and other engineered timber panels. Can be used in applications where joints may be subjected to short term water contact or exposure to high humidity i.e. kitchen work surfaces, window frames, doors and stairs, but not permanent immersion in water. Suitable for interior and exterior applications.

Read more less

A dual purpose, solvent-based solution for effective cleaning of expanding foam applicator guns and removal of wet/uncured foam. Regular cleaning is essential in order to prolong the service life of the applicator and optimise foam delivery. Attaches to standard foam applicator guns. Removes and dissolves fresh, uncured PU-foam from expanding foam gun applicators. The can is fitted with an adapter ring which screws on to the gun. For use without the gun, the can is fitted with a spray head. This dual function meets the requirements of the professional user.

Read more less

A cold applied, solvent-borne, heavy-duty adhesive for bonding all types of bituminous roofing felts to asphalt, felt, metal and concrete. It can be used for bonding mineral chippings to bituminous surfaces. Suitable for asphalt, felt, metal and concrete. Application by brush, mop or squeegee. Please download Technical Data Sheet for full application details.

Read more less

A general purpose, contractors grade acetoxy silicone sealant with fungicide, suitable for most sealing jobs around the home. Quick curing and mould resistant. Suitable for sealing and waterproofing in areas of high humidity. It has excellent adhesion to glass, glazed surfaces, ceramic tiles, many plastics and most paints. CE Approved: It is ideal for applications in bathrooms, shower rooms, utility rooms and general DIY applications including kitchen work tops. NOTE: Not suitable for fixing of mirrors or sealing natural stone or marble. Note: This product should not be used with aquaria or on bitumen or asphalt. Has a 20 year lifespan and a movement value of 12.5%.

Read more less

A fast curing, PU adhesive foam that has been specially developed for the rapid installation of plasterboard, insulation boards, floorboards and roof decking. Supplied in an aerosol can, the product can be used with a standard foam gun. A multi-purpose, polyurethane construction adhesive in a can – but not just a dry wall adhesive. The cured adhesive is an excellent heat insulator and has exceptionally good adhesion properties. Can also be used to dampen sound. Features & Benefits:- No mixing, no mess, no water, no dust! - No need to carry heavy bags of plaster - One can fixes approximately 5 standard plaster boards - 30% time saving over conventional dry wall adhesives - Can be plastered in 1 hour - Can be applied direct to boards or the wall either horizontally or vertically - Can works on solid walls, metal and timber studding, battens and beams - No nails or screws required. Supplied in an aerosol can, application is by universal foam gun (BDAG1, BDAK45 or BDEFA). Adheres well to most building materials, with the exception of Teflon, polyethylene and silicone surfaces. Suitable for installing doors and windows, insulating and fixing pipes, filling holes and gaps, fixing wall panels, skirting boards, roof tiles, decking and for thermal insulation. Shake the can for at least 30 seconds then fix foam gun to the can and apply. The can will operate in any position.

Read more less

One part mid mod sanitary grade silicone sealant specifically designed for areas which are prone to high humidity or frequent wetting. Contains a powerful anti?fungal compound to resist mould growth. Features & Benefits:- Permanently flexible - Mould Resistant - Waterproof - For Internal Use - High Viscosity Formula - UKCA Approved. Ideal for bathrooms, shower areas, wet rooms, kitchens. Suitable for use with sanitary plastics, glass, melamine, laminates, enamel, anodised aluminium, lacquered metals, painted timber, painted plaster, primed or painted concrete and primed metals.For sealing around worktops, basins, sinks, bed basins to vanity units and also to seal shower trays and shower units.  

Read more less

One part mid mod sanitary grade silicone sealant specifically designed for areas which are prone to high humidity or frequent wetting. Contains a powerful anti?fungal compound to resist mould growth. Features & Benefits:- Permanently flexible - Mould Resistant - Waterproof - For Internal Use - High Viscosity Formula - UKCA Approved. Ideal for bathrooms, shower areas, wet rooms, kitchens. Suitable for use with sanitary plastics, glass, melamine, laminates, enamel, anodised aluminium, lacquered metals, painted timber, painted plaster, primed or painted concrete and primed metals.For sealing around worktops, basins, sinks, bed basins to vanity units and also to seal shower trays and shower units.  

Read more less

An alkali resistant glass fibre woven mesh, ideal for reinforcement of render or basecoat plaster. An ideal anti-crack reinforcement for rendering systems. For use in construction; mainly to reinforce concrete, cement, screeds and renders, ETICS external wall insulation systems with acrylic, polymeric, silicon, silicate and mineral renders, cracking surfaces repairs and tiling (as reinforcement). Offering incredible strength when embedded into wet base coat renders and is light, economical, tear resistant and easy to use. Stabilises surfaces and prevents cracking. Can be used with Bond It Universal Building Render (BDER25). Apply an even background coat of render to the required thickness. Place the mesh into the wet render and lightly press in with a trowel to completely cover the mesh. Overlap joints in the mesh by a minimum of 5cm. Trowel over to give the required finish effect. Re-inforcement for waterproof membranes, felts and similar roofing materials. Distributes stress evenly when used with marble, stone and ceramic tiles. Maintains stability and durability when used with floorcoverings. Weight- 160gsm;Construction - 4x4mm mesh; 1 roll will cover 50m of substrate at a 1m width.

Read more less

A high strength, 100% fibreglass close weave (9 x 9 per sq inch) mesh scrim tape that will not blister or bubble. Has a self-adhesive backing for easy application. Eliminates the need for pre-plastering, provides extra reinforcement and saves time and money. Performs in a wide range of temperatures (5-35oC). Specification: Backing: 100% Fibreglass; Adhesive: Acrylic; Total Thickness: 0.2mm; Total weight: approx. 70 gsm. For joint finishing, crack and hole repair. Suitable for use on drywall and plaster walls and ceilings.

Read more less

A high strength, 100% fibreglass close weave (9 x 9 per sq inch) mesh scrim tape that will not blister or bubble. Has a self-adhesive backing for easy application. Eliminates the need for pre-plastering, provides extra reinforcement and saves time and money. Performs in a wide range of temperatures (5-35oC). Specification: Backing: 100% Fibreglass; Adhesive: Acrylic; Total Thickness: 0.2mm; Total weight: approx. 70 gsm. For joint finishing, crack and hole repair. Suitable for use on drywall and plaster walls and ceilings.

Read more less

A brilliant white, ready mixed adhesive paste, for use as a thin-bed waterproof ceramic wall tile adhesive and joint filling grout.  Features & Benefits:- Water resistant. - Excellent bond strength. - Retards mould growth. - Will not shrink on drying. - Use as adhesive and grout. - Interior grade. - UKCA Approved.  Uses: Suitable for fixing all types of ceramic wall tiles, including mosaics, porcelain and vitrified tiles in interior locations. For use in bathrooms, kitchens and shower areas, where the tile surface is subject to frequent wetting, but not total water immersion. Can be applied to gypsum plaster, cement fibreboard, existing tiles, cement render, timber panels and plywood composite boards. Recommended for use in areas such as shower/changing rooms, power showers, work tops and any tiled wall surface which is subject to persistent humidity or frequent wetting. The dual purpose application properties of Fix 'N' Grout make it particularly suited to small area DIY applications and localised repairs. Note: Not recommended for use with large format tiles.

Read more less